You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

admiral rx600sp i

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • admiral rx600sp i

    I recently purchased an RX600SP for my Dynam Sbach. I tried to bind it to my DX6i and all servos worked but no throttle and the ESC beeps rapidly. I normally use a Spektrum AR600 with a Detrum iStone Pro gyro with no issues. I’m not sure what Im doing wrong. Any help would be greatly appreciated. Thanks in advance

  • #2
    Try to move the throttle trim down.

    Comment


    • #3
      Or, maybe, calibrate your throttle. Take your prop off. Turn on your Tx. Put the throttle full up. Plug in your battery. Let it beep. Pull the throttle down. Let it beep. It should be ready to go. If not, do what Ryan said. Good luck. Doc

      Comment


      • #4
        Thank you for your help gentlemen!! I tried it both ways and they both worked!!

        Comment

        Working...
        X