Roban - World Class Scale Helicopters

You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

Nx6 help needed

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nx6 help needed

    Have recently purchased an nx6
    i bought it along with e-flite focke wulf
    started from scratch creating model and binding
    I immediately started having warnings go off
    and servo flutter , have created this model and cleared it a bunch of times , tried binding a couple of different ways , still same issue ..... browning out and acting like in failsafe
    been on phone countless times with horizon , they had sent me new reciever, same problem, next it was esc , same problem,
    set transmitter back to factory specs . And also did a usb firmware update this past Saturday,
    called horizon for a model download of the focke wulf
    they don’t have one , but told me to use the p-51 model
    template , so imported it and bound plane
    next thing happened was warning alarms and same brownouts. Called again ,, and customer service said to eliminate some of my telemetry,,
    mat this point the rep kinda hung up on me , called back and prompt said they were closed,,,
    im very frustrated ,,, cause I just got back into the hobby . And this is damn difficult to figure out at 60 years old Any help appreciated

  • #2
    Might be time to go to your local hobby shop or your nearest flying club to get some hands on assistance. Things may have changed since you last were in the hobby. It could be something very simple that you're missing and having someone "in person" to guide you might be what's needed. Talking to someone over the phone or even over the internet may not convey all the details necessary to resolve problems.

    Oh, and 60 ain't too old to figure this stuff out. I started well past that.

    Comment


    • #3
      I appreciate all that
      but have already been there done that ,,
      have a couple other rtf planes with there own transmitters , no issues at all
      but thanks

      Comment


      • #4
        Originally posted by Mikemaine58 View Post
        . And this is damn difficult to figure out at 60 years old Any help appreciated
        Don't use age as an excuse. 60 doesn't even qualify for Medicare.

        I'm 75 and recently taught myself CAD programming and C++

        Comment


        • #5
          Originally posted by Mikemaine58 View Post
          I appreciate all that
          but have already been there done that ,,
          have a couple other rtf planes with there own transmitters , no issues at all
          but thanks
          The only other suggestion I can make at this time ............................. is to read the NX6 manual. It's impossible to know what it could be that's causing the problem. It could be something so seemingly insignificant that's it's easy to miss over the typed word.

          Comment


          • #6
            Your right no issue with age
            but my general background is mechanical,
            installer and diagnoses of home standby generator systems

            and yes I’m sure it is something that I have missed.

            Comment

            Working...
            X