Best glue for joining the carbon tubes and the 2 fuselage halves together on the AL 37 Thanks in advance
Announcement
Collapse
No announcement yet.
Best Glue
Collapse
X
-
you can get fix n flex from horizon for a lot less than foam tac. and it works great. but takes like 2 whole days to cure. but it definitely bonds plastics ect to foam very well. https://deluxematerials.co.uk/products/fix-n-flex
Comment
-
And it don't take two steenkin days to cure per the reference to fix-n-flexWarbird Charlie
HSD Skyraider FlightLine OV-10 FMS 1400: P-40B, P-51, F4U, F6F, T-28, P-40E, Pitts, 1700 F4U & F7F, FOX glider Freewing A-6, T-33, P-51 Dynam ME-262, Waco TF Giant P-47; ESM F7F-3 LX PBJ-1 EFL CZ T-28, C-150, 1500 P-51 & FW-190
Comment
-
Originally posted by OV10 View PostAnd it don't take two steenkin days to cure per the reference to fix-n-flex
for what it's worth horizon hobby sells fix n flex. Your hobby shop can get it by next day. Foam tac must be toxic because it can't be shipped by air. You literally have to wait a week or more for delivery depending where you live. I'm currently on 7 days from Amazon
Comment
-
here is how well it sticks to plastic and foam. btw, I didn't even clean the servo. it has nitro fuel oil film and dirt on it still I just rubbed it off with a rag and no solvent. I had to twist the servo off. as you can see, it brought foam with it. it is able to be scrapped off the housing. it's a soft silicone like material. the only way foam tac is better, would be if it dries faster. because fix n flex does everything you need it to do. it also doesn't harm electronics. it's a perfect alternative.
the second attachment I scraped it off with my fingernail. to show that it is removable without harm to your servos. it's on there good but not too good. it's perfect. it's not some cheap junk, it's made for this stuff. and made in the UK. where they probably can't get foam tac.
Clear, tough, resilient, gap-filling adhesive. Bonds foam, plastic & metal. Produces flexible bonds in ways that other glues cannot. Fix ‘n’ Flex is a 1 part, clear, air drying, flexible adhesive with gap filling properties. It has exceptional surface grip and is safe to use, curing at 1-2 mm /hour. Joints that are
Comment
-
alright so i'm testing the foam tac. now i see why it can't be shipped via air. stuff is potent like paint or model glue. maybe this is why it will set up faster.
it's also a lot more runny. so you may have to tape parts in place. or use tape to keep if from dripping out all over other stuff.. the fix n flex is thick so it wont run or drip out. and holds the parts without tape. maybe not a servo but 2 foam pcs and maybe something lighter than a servo. this helps in mounting things to vertical surfaces.
edit, after about 10 mins the foam tac is melting the packing foam my plane came in. so it's not exactly a safe for all foam glue.
Comment
-
Originally posted by serpentracer View Postalright so i'm testing the foam tac. now i see why it can't be shipped via air. stuff is potent like paint or model glue. maybe this is why it will set up faster.
it's also a lot more runny. so you may have to tape parts in place. or use tape to keep if from dripping out all over other stuff.. the fix n flex is thick so it wont run or drip out. and holds the parts without tape. maybe not a servo but 2 foam pcs and maybe something lighter than a servo. this helps in mounting things to vertical surfaces.
edit, after about 10 mins the foam tac is melting the packing foam my plane came in. so it's not exactly a safe for all foam glue.
It clearly states on the package...……...Depron, EPP, EPO
Packing foam is made from EPS (Expanded Polystyrene) which is the easiest to melt of any of the foams with solvents.
Most of the modern foam planes are made with EPO.
I'll lay a wager that packing foam will melt with your favorite new glue tooWarbird Charlie
HSD Skyraider FlightLine OV-10 FMS 1400: P-40B, P-51, F4U, F6F, T-28, P-40E, Pitts, 1700 F4U & F7F, FOX glider Freewing A-6, T-33, P-51 Dynam ME-262, Waco TF Giant P-47; ESM F7F-3 LX PBJ-1 EFL CZ T-28, C-150, 1500 P-51 & FW-190
Comment
-
Originally posted by OV10 View Post
It's doesn't claim to be safe for ALL foams.
It clearly states on the package...……...Depron, EPP, EPO
Packing foam is made from EPS (Expanded Polystyrene) which is the easiest to melt of any of the foams with solvents.
Most of the modern foam planes are made with EPO.
I'll lay a wager that packing foam will melt with your favorite new glue too
however I do like how fast it was curing.
Comment
Comment