Hi All, I’m hoping someone can help me out here. I have an easy fly ST-330 someone gave me.
I bought a new battery for it, hooked it up, it turned on and off every few seconds intermittently and beeped a few times. On the last occasion it was connected I tested the motor for a few seconds to 80% thrust and then it stopped itself, smoke came off the esc and the yellow wire unsoldered itself.
Safe to say the esc is cooked? I haven’t resoldered it yet.
So my question is, what’s the right battery/esc/motor setup for this?
Here’s what I’ve got:
ESC
Ble-18
Max current = 18A, 2-3 cells (Li-Po), with low voltage cut and optional brake
Battery
Giant power
Lipo
2200 mAh
11.1v 35C
(5 C fast charger)
Motor
KV
1000Rpm/V
10” folding prop
Anyone?
I bought a new battery for it, hooked it up, it turned on and off every few seconds intermittently and beeped a few times. On the last occasion it was connected I tested the motor for a few seconds to 80% thrust and then it stopped itself, smoke came off the esc and the yellow wire unsoldered itself.
Safe to say the esc is cooked? I haven’t resoldered it yet.
So my question is, what’s the right battery/esc/motor setup for this?
Here’s what I’ve got:
ESC
Ble-18
Max current = 18A, 2-3 cells (Li-Po), with low voltage cut and optional brake
Battery
Giant power
Lipo
2200 mAh
11.1v 35C
(5 C fast charger)
Motor
KV
1000Rpm/V
10” folding prop
Anyone?
Comment