Official Skynetic 1200mm Swift 3D Discussion Thread

[Aros]

Swift 3D 1200mm (47.2") Wingspan - ARF BUNDLE from Skynetic - SKY1009-002

Click here for the official product page

The Skynetic Swift EPP is a 3D flyer that can penetrate through moderate winds while performing show-stopping 3D maneuvers with ease. Both wing and gear are easily removable for transport and/or flying preference. Made of light yet durable and thick EPP foam with a streamlined and aerodynamic profile, the Swift is tailor-made for countless hours of exhilarating, flying fun!
FEATURES:

• Slick, streamlined and aerodynamic profile with sharp red, blue and yellow livery
• Easy-to-remove landing gear for transport and flying preference
• Powerful AS2814 KV1000 Brushless motor for a wide flight performance envelope

INCLUDES:

• Skynetic Swift 3D 1200mm (47.2") Wingspan - ARF BUNDLE
• AS2814 KV1000 Brushless motor
• 40-amp brushless ESC with XT60 connector
• 4x 17g servos

REQUIRES:

• 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
• 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
• 3 Cell 11.1V 1300 mAh Li-Po battery with XT60 connector - We recommend EPR13003X6
• 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
• 2 X 12" Servo extension leads - ADMSERVX300
• 1 X 4" Servo "Y" lead - ADMSERVYX150

PRODUCT SPECIFICATIONS:

AGE LEVEL : 14 AND UP
SKILL LEVEL : INTERMEDIATE
BUILD TIME : 5 HOURS

Wingspan	44.1in / 1120mm
Length	46.5in / 1180mm
Flying Weight	810 - 900g
CG (Center of Gravity)	120 - 130mm from the leading edge of the wing at the root
Power System	Powerful AS2814 KV1000 Brushless motor (installed)
Electronic Speed Control	40-amp brushless ESC with XT60 connector (installed)
Propeller / EDF	Electric propeller
Servos	4x 17g
Landing Gear	Fixed
Required Battery	3 Cell 11.1V 1300 mAh Li-Po battery with XT60 connector (required)
Required Radio	4+ channel radio system (required)
Ailerons	Yes
Elevator	Yes
Rudder	Yes
Flaps	No
Lights	No
Hinge Type	Foam
Material	EPP Foam
Skill Level	Intermediate
Build Time	5 Hours
Recommended Environment	Outdoor

[bob_nj]

Impressive little airplane.
I have several other profiles of this size, but for the price, this one is a winner.
Really enjoying the way if flies.
Suits my style.
A mix of precision and freestyle.
Handles the wind too.

Give one a try...

[Alandavis]

I’m looking for suggestions for the amount of throw for control services. I’m not a 3D flyer and would really to set up my Swift for more like sport flying.
Thanks!

[Vtaylor1]

I set up my spektrum IX14, C or F channel with three diffeent amounts of throw. Say channel 1 at 100%, 2 at 80 and 3 50-60%. Test that to see if its to little or to much for your flying. Adjust from there. I personally us my C channel for Aileron Throw and F channel for elevator throw. I do the same percentage on both.

[bob_nj]

Anyone know who makes the ESC in the Swift. I got mine late 2022.
There are no programming instructions that I can find.

[bob_nj]

Looks like it's a 40A Admiral. Any idea where I can get a programming card, or instructions?

Thanks
Bob