SanExup yeah!!! Please don’t be quite, it is music to my ears
Announcement
Collapse
No announcement yet.
New E-flite Fw-190A, 1.5m
Collapse
X
-
i really like this fw190a..flys great when u listen to advise from others lol.. all the statements about landing with some power seem true as i tryed a no power and stalled it from about 2 feet up and it came down on left main,, no damage to plane but the retract quit and now have to wait for july to get a new one from hh...if anyone knows where i can get a new or used retract unit please let me know as i dont want to wait for july
Comment
-
Originally posted by jseese View PostFor those that have used Callie Graphics what scale did you use? Thanks!
The Eflite FW190 is approximately 1:7 scale
I made my own waterslide or painted graphics, and my friend did the Russian front winter camo using a combination of some of mine and Callie's.
- Likes 1
Comment
-
jseese
Originally posted by Phatbob View PostI received my graphics from Callie and I believe them to be on the small side. I calculated scale of the plane at 1/7 and ordered accordingly. I also ordered the nomenclature and find those to be on the large side. If I did it again, I'd order the 1/6 scale decal sheet.
Comment
-
Originally posted by bobtheman View PostWhat can you do to support the elv. rod from flexing?
Thnaks
First, I wedged a piece of foam up against the pushrod tube inside the fuselage. The pushrod still wanted to bend, so I replaced the wimpy stock pushrod with a beefier pushrod. I used a 2-56 rod for my pushrod. It is almost too fat for the pushrod tube, but it’s worked fine for me for over 60 flights.
---
Warbirder
Comment
-
Originally posted by SanExup View PostThat's not possible completely. It will leave an outline where the decal was. If your repainting, I use packing tape or paint over them.
Comment
-
Originally posted by Oxotnik View Post
I did two things to my EFlite 190, to stop the Elevator pushrod from flexing.
First, I wedged a piece of foam up against the pushrod tube inside the fuselage. The pushrod still wanted to bend, so I replaced the wimpy stock pushrod with a beefier pushrod. I used a 2-56 rod for my pushrod. It is almost too fat for the pushrod tube, but it’s worked fine for me for over 60 flights.
Comment
-
T- Elbert I LOVE THIS, well done!Live Q&A every Tuesday and Friday at 9pm EST on my Twitch Livestream
Live chat with me and other RC Nuts on my Discord
Camp my Instagram @Alpha.Makes
Comment
-
Originally posted by T- Elbert View PostMostly finished with my repaint on my FW 190. Nowotny’s white 10 winter splinterI solemnly swear to "over-celebrate" the smallest of victories.~Lucky B*st*rd~
You'll never be good at something unless you're willing to suck at it first.~Anonymous~
AMA#116446
Comment
Comment