Announcement
Collapse
No announcement yet.
500 size UH-1C Huey - 174th AHC
Collapse
X
-
-
After a full day of work, the mechanics have been set up, programmed, hovered, and installed in the airframe. Also installed the tail position lights and flashing beacon. Still have solve a few issues, but maiden flight should be soon! Then I will be working on getting the paint work finished up, and doors/windshields mounted.2 Photos
- Likes 1
Leave a comment:
-
Originally posted by Prowler901 View PostAnother fine bit of workmanship there, Delta. She's lookin' good! :Cool:
Leave a comment:
-
Another fine bit of workmanship there, Delta. She's lookin' good! :Cool:
Leave a comment:
-
Originally posted by JFandL View PostYes the lights are very bright, going to look good in the air. I've started on my 500 T-Rex mechanics for the build for a new UH-1B. Should be ready to test fly the mechanics by next week. Then all the real fun stuff starts again . ROFL
John
Made some more progress on the Huey today. Installed the roof antennas and pitot probe, completed rivet work in a few missing spots (mostly the entire underside). After some primer to seal over the rivets, I couldn't resist shooting some OD on, and painting the glade shield on the nose. Still have to work on a few more airframe details before continuing paint, but its starting to get there. I need to install the "towel rack" VHF antennas on the tail, add the tail stinger, and am considering a rework on the H-stabs. The manufacturer appears to have put B model sized stabs on, and they aren't perfectly aligned. The C had a much larger chord than the B, so I might try extending them with balsa and FG. Also looking at adding the cargo hook on the bottom, it's too prominent of a feature for me to omit from the airframe.4 Photos
Leave a comment:
-
Yes the lights are very bright, going to look good in the air. I've started on my 500 T-Rex mechanics for the build for a new UH-1B. Should be ready to test fly the mechanics by next week. Then all the real fun stuff starts again . ROFL
John
Leave a comment:
-
Haven’t had much time to work on this, but I’ve started on the basics. Glued in a 1/4” plywood base over the gear mounts, with will serve as the mounting point for the mechanics. Also finished installing all the servos and electronics within the mechanics. Tonight, I installed a Freewing light controller and some of the LEDs from the 90mm F-16, and they are super bright! Still have to install white lights on either side of the tailcone, and the beacon above the engine.1 Photo
Leave a comment:
-
Originally posted by JFandL View Postcould you post a picture of the Roban tail box?? Would love to see if its now like the old heliartist type1 Photo
Leave a comment:
-
could you post a picture of the Roban tail box?? Would love to see if its now like the old heliartist type
Leave a comment:
-
Originally posted by JFandL View PostDid you do the scale rivets? or did it come that way?
Specs so far:
Motor: Savox BSM3750 1200KV
ESC: Castle Edge 100A
Battery: 6S 4000mah
Cyclic servos: DS515M
Tail Servo: DS8910A+
FBL: iKon2 FBL
Leave a comment:
-
Thanks guys, it going to be fun project!
Originally posted by Akubudaklaut View PostHi there..can I know where u get that scale body?
Leave a comment:
Leave a comment: