You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

Flying Wing.

Collapse
X
Collapse
First Prev Next Last
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flying Wing.

    Strix Goblen , unmanned drone ship. Lots of upgrades. Heat wrapping wings asap.

  • #2
    Need to lengthen the fan wires and esc wires. On the p15 Lippisch wing. It flys great at low rate. Modded the forward fuselage with balsa wood. I wouldn't recommennd this craft as 2nd plame.

    Comment


    • #3
      Have some time off from my trucking job. My new Recruit came in the mail today. I going to laminate the wings today. I have Orange and Yellow neon paint, I don't care for the decals they gave me. Have to think of design. If anybody wants the stock decals, let me know.

      Comment


      • #4
        Now I lengthen esc wires. Do to crashes., they come unpluged. I have to lenghthen the fan wires as well. For the Lippisch jet. If MRC can have these fan wires lenghthen a little more..Thanks Nixk.

        Comment


        • #5
          Encapsulatating Recruit with Batman, lol. Thankyou Owen for stencils.

          Comment


          • #6
            Bat Wing cracked the sky nice today. Dialed in 20% expo and 70% rate for maiden flight. I love this wing, it glides forever.

            Comment


            • #7
              New paint job.

              Comment


              • #8
                The new beginning of XT347 64 mm edf wing. Scratch building from old parts.

                Comment


                • #9

                  Comment


                  • #10
                    XT is on hold. Had to take it apart. Working on the ZOHD ORBIT. Laminating and camera setup. To cold outside to fly.

                    Comment


                    • #11
                      Formation lights. Being added on. Red, Green, Blue. Thanls to previous member. One for each plane.

                      Comment


                      • #12
                        With the weekend off, decided to install speed brakes. I have one side completed almost. Operating them off of the flap channel. Was thinking on installing drag rudders, but adding speed brakes is challenging enough. Still waiting for hinges from Banggood to complete the ailerons. I bought the Balsa contoured type. As long as I keep the c.o.g. in line, everything should work out. Decided to go with a 1400 kv outrunner instead of the edf. Which is also on the way from Banggood.

                        Comment

                        Working...
                        X