P-38 - The Ultimate EPO Lightning

Prices?

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • rifleman_btx
    replied
    Well the point of tariffs are to do exactly what you guys were talking about in the beginning to make the consumer not buy the products due to price increases. That in the end hurts the end seller as well as the manufacturer. If they can't move the product, it stagnates the flow of income. But I'm sure other factors at play pushed this as well as states by the employees of MRC.

    Leave a comment:


  • dkalwishky
    replied
    I've also got both planes. They both look and fly fantastic. I prefer my FLRC bird over the Arrows RC bird for a few reasons. Quality I know and trust, better electronics, a more scale prop and hub, more scale details and it's a little bit bigger.

    I'm glad we have choice in this hobby and I'm glad I can afford, store and transport larger planes. I much prefer larger planes.

    Leave a comment:


  • borntoolate
    replied
    I have bought and flown both the FL 1200mm Bearcat as well as the 11Hobby 1100mm Bearcat. Both are very nice airplanes. Both are fun to fly and take up almost the same amount of space.The quality of the FL Bearcat, to me, is superior to the 11Hobby plane.The finish of the FL is very good. I will say that I bought 2 of each version because (I am crazy) and the Bearcat is one of my favorite Navy planes. If I remember correctly, I flew the 11Hobby plane first and it certainly was fun to fly. The FL1200 Bearcat is just as fun and looks great in the air as well. The Flightline model has more scale parts and and appearance. Also, for me, service and replacement parts are extremely important to me and I have found no-one in the industry that does a better job in this regard than MotionRC.

    It is very hard to compare these two planes as they are different size airplanes. Some people like the smaller planes for transport or other reasons. Some people like a larger plane. Some people want to open the box and be on the field in minutes. Some people like to detail, paint or modify their planes. We are all different as to our likes and dislikes. Myself, I like to paint and modify my planes so that when I go to the flying field, my Bearcat will not look exactly like the other 6 Bearcats out there.

    There is something for everyone in this hobby. Something for everyone's budget and desires. One huge issue for me is support and spare parts availability. For me, MotionRc dominates in the area. That is worth a small extra cost.

    Bob

    Leave a comment:


  • Alpha
    replied
    As politely as possible, may I also add to Tom's list above that our FlightLine 1.2m Bearcat is officially licensed by Grumman. Motion RC is a veteran owned company and we make extra effort at extra cost to "fly formation" in that regard, whereas some other suppliers do not.

    Ultimately, there are many options out there for us all to review, each with their pros and cons. It's a good time to be in the hobby for all of us.


    I'll end by reiterating the invitation for comparative reviews to be posted here on Hobby Squawk by anyone who has two of a similar model, such as the ElevenHobby/Arrow 1.1m Bearcat and the FlightLine 1.2m Bearcat. I'm sure readers would appreciate more comparisons to help them make their buying decisions. Comparisons aren't negative; rather I find them informative and I think at the end of the day content is king. Objectivity benefits all of us!


    Also, Icepirate3, don't worry my friend, I'm in the same boat as you, window shopping for toys I can't yet afford. LOL

    Leave a comment:


  • Tom
    replied
    Keep in mind the differences between the above plane and the FlightLine Bearcat is comparing apples and oranges.
    For an extra $39 for the FlightLine, you get:
    1) FlightLine Bearcat is a 10% larger plane
    2) HobbyWing 60A ESC vs unknown brand 40A ESC in the cheaper plane
    3) Larger FlightLine motor with a higher amperage and voltage limit
    4) The FlightLine uses a 4S LiPo (faster) vs a 3S LiPo (slower)
    5) The FlightLine has a larger more scale prop
    6) The FlightLine has digital metal gear servos (elevator and rudder) vs analog plastic
    7) FlightLine durable plastic hinges vs foam hinges
    8) The FlightLine has loads of scale plastic parts and hard points all of which require expensive molds (see picture below)

    To those who have the budget, you get all those extras for $39. We are enthusiasts who spent loads of time to get the FlightLine Bearcat perfect. We spent more time than you can imagine testing colors and power systems once the design was done. I'm not trying to trash the other plane. I'm merely pointing out what you get for an extra $39. On top of that, we back the FlightLine with the customer service you guys expect from Motion RC.

    Click image for larger version  Name:	Capture.JPG Views:	0 Size:	35.6 KB ID:	184597

    Leave a comment:


  • JamesonC
    replied
    Originally posted by radfordc

    And you're not going to tell us where?
    I'm gonna bet it was the new Arrows RC (FMS) one.

    https://www.hobbyzone.com/arrows/AH005P.html

    Leave a comment:


  • radfordc
    replied
    Originally posted by Rcfiddy1
    Best part of the price increase is that there’s always someone competing by selling at lower prices. Picked up a 1100mm bearcat for almost 100 dollars cheaper than a flightline 1200mm....same quality, same electronics but Cheaper.
    And you're not going to tell us where?

    Leave a comment:


  • Rcfiddy1
    replied
    Best part of the price increase is that there’s always someone competing by selling at lower prices. Picked up a 1100mm bearcat for almost 100 dollars cheaper than a flightline 1200mm....same quality, same electronics but Cheaper.

    Leave a comment:


  • icepirate3
    replied
    These were posted by Alpha on a different page and are great reminders of why these cost what they do. The gear consists of over 100 pieces that are hand assembled. MRC is in the business of making money. If they kept their prices the same when logistics costs raise to the point that the profit is lost then we could all say goodbye to MRC. They had a tough decision to make and they made it. If raising the prices helps them maintain the resources to continue to develop and test new models while still being a profitable business I'm all for it. We are all salivating over what's in the pipeline of new models. Just look at all the "What's next" or "What new FW model would we want" pages. How many would have been ok if they maintained their prices and cut back on new product development to the point of releasing only 1 or 2 models a year?

    I look at some of the planes in my hanger and remember that not long ago, they would have been ridiculously expensive and out of reach for most in the hobby. Think about what the FW F14 would have cost 10/15 years ago to build and get as air worthy as this one? I wonder sometimes how many planes have to sell to just pay for the molds required to mass produce these things.

    There has never been a better time to be in this hobby, especially if you keep things in perspective. There are folks putting $5k turbines in $250 ARF's! It's a blast of a time to be playing with little airplanes and I'm willing to keep paying the entrance fee.
    Rant ends here, gotta shop for more toy airplanes I can't afford ;)

    Leave a comment:


  • radfordc
    replied
    I'm thinking not a lot of guys here took Econ 101 in school.

    Leave a comment:


  • JamesonC
    replied
    Originally posted by moodg16
    I have had to cut back as I cannot afford to pay the higher prices, I just hope Motion RC will lower the prices once the tariffs are repealed as I feel they will end soon. I have made purchases at Horizon Hobby as they offer affordable financing through Affirm, I hope Motion RC will start offering Affirm soon too.
    Motion has said multiple times that it had very little to do with tariffs.

    Leave a comment:


  • moodg16
    replied
    I have had to cut back as I cannot afford to pay the higher prices, I just hope Motion RC will lower the prices once the tariffs are repealed as I feel they will end soon. I have made purchases at Horizon Hobby as they offer affordable financing through Affirm, I hope Motion RC will start offering Affirm soon too.

    Leave a comment:


  • rifleman_btx
    replied
    Even though ive gone to printing my new planes, most all the electronics i buy i get from MRC, but lately ive noticed they are getting rid of the radio systems i use. That hurt to see also :(

    Leave a comment:


  • JeffS69
    replied
    [QUOTE=Companies like Horizon produce in larger quantities but still had increased costs too. Horizon increased their prices but they did it to mostly to the dealer, not the consumer. They raised our price significantly but not your price.[/QUOTE]

    So if Horizon Hobby sold Freewing products, their price to the customer would be less than MRC? My business is subject to the Chinese tariff increases as well. Initially (Nov. 2017) these were 15% increases with the possibility of another 10% Jan 1st 2019. A total of 25%. As we all know or not, the 10% increase in January 2019 did not happen. Price increases are never good. I've lost quite a bit of business due to the first 15% tariff increase. Mostly on high volume jobs. 15% more expensive on a 100K or say a 1M dollar job is huge. And unfortunately these jobs get shopped around, sometimes to the lowest bidder that can produce a quality product on time. Unfortunately for us consumers, (or fortunately for MRC) it appears that MRC is the only USA distributor of Freewing models? So basically no competition apples to apples. Also in my business some jobs (planes) have a higher profit margin than others, so while some jobs (planes) have seen a modest 5% to 8% increase, while other have gone up the full 15% or more depending on profitability. And a tariff increase is a great way to get back profit margins on a job (plane) that typically runs at low margin to begin with. IF the customers buys it? Also, it boils down to how little a profit margin, I or MRC is willing to accept, how difficult the job is to run,(Logistics) and if the customer is worth it. Yes, there are some difficult people that requires so much attention above and beyond the actual job that it reduces the profit margins.(ie. Warranty returns on defective models or parts) Price increases force customers to really think about their purchases, the value of that purchase and whether they / we feel we are truly getting the best bang for the buck, and backed by excellent customer service or no CS. MRC DOES have the best CS in the business and excellent products. No denying that. So my take is, they hired more / new employees, opened a UK warehouse and are after higher profit margins to cover these operating cost, I get it. So the bottom line is, until there is another USA Freewing distributor to compete against MRC, we can only either buy their product or not. I personally prefer to deal with MRC, so I will be supporting them because there are the premier RC plane supplier. And I want them to be around when I buy my next model. I have no problem supporting a real price increase, Happy Flying Boys and Girls!




    Leave a comment:


  • Mako
    replied
    Originally posted by JamesonC
    For me, it really isn't about is the plane really "worth" the money. Worth is in they eye of the beholder. F22 was a perfect example for me. Some saw the original price on that plane incredibly over priced and others saw it very reasonable. So, all that is just an opinion.

    My problem also isn't an increase but the size of the increase. Some of the increases are very large. I just have a pretty hard time believing that they were "getting by" on the old prices but it was gonna take $30-$80 increases to keep everything afloat. If you need to increase prices due to various reasons, fine. But, I don't think that size increase was expected by many. Radios were hit the hardest by Tariffs from what I read and even Spektrum didn't have that big of an increase, AND they warned people it was coming multiple times. And for radio equipment to get hit the hardest, Admiral rxs didn't go up, yet PNP planes did??? :Thinking:

    Either way, I am not gonna bash MRC for doing whatever they needed to for whatever reasons they are. I don't like it and wish they would have handled it better since they have always bragged about being all about the customers. If that was REALLY true, give your customer base a chance to make any purchases they had been considering and on the fence about before such a big increase. But now, like many others, I will just really have to look harder at future purchases and see what else is available. MRC has had a hard time keeping a bunch of stuff I need in stock as well lately, maybe this has something to do with it, don't know. It will be interesting to see if HK, HH, or FMS follow suit with price increases on their products.
    JamesonC this was well said. I know I was on the fence for two of the new planes, the F-22 and the Flightline F4U. Now with the increase I have decided to withstand from the purchase. I have noticed that the overseas competors have not raised their pricing. So that being said I just ordered a few airplanes that are now less expensive including the shipping as well.

    Leave a comment:


  • Valkpilot
    replied
    Originally posted by Twowingtj
    Thanks for chiming in Tom. Most of us here on the Squawk get it. You did forget to mention that the cost of keeping Aplha supplied with Ramen has gone up too! You don't want to scrimp thereLOL. He's the one that keeps the good stuff coming down the pipeline. Do what you have to do to keep MRC there for us.
    Speaking of Ramen, did you know that the guy who invented it was motivated by the belief that his homeland(Japan) would one day have a manned space program of it's own and he wanted to be the person who was responsible for feeding it. And as another side note, whenever somebody talks about Ramen or I stock it on the shelves where I work, I all ways think about the title sequence of the show "Futurama" where
    they show the billboard advetising Bachelor Chow.

    "

    Leave a comment:


  • Twowingtj
    replied
    Thanks for chiming in Tom. Most of us here on the Squawk get it. You did forget to mention that the cost of keeping Aplha supplied with Ramen has gone up too! You don't want to scrimp thereLOL. He's the one that keeps the good stuff coming down the pipeline. Do what you have to do to keep MRC there for us.

    Leave a comment:


  • Tom
    replied
    Hi everyone. I'd like to mention a few things. Market forces caused us to look at every single plane we sell. While some planes did go up, most only went up a little, some did not go up at all, and some actually went down. We pass on our savings where we can. We've tried to hold prices firm since we started Motion RC 6 years ago with the exception of FMS which was not dictated by Motion RC. During that time freight costs for container shipping have gone up significantly. Healthcare, technology (website and software), rent, insurance, salaries, licensing, and UPS/USPS costs have gone up significantly. Manufacturing costs (labor and raw materials) and ultimately product costs have gone up. We'd love to keep prices low forever but market forces have made that impossible. Expenses and prices of goods have been going up every year we've been in business and we held our prices for as long as we could.

    For those who say it is just foam and foam is cheap, you are right, foam is cheap. However, the molds to turn melted foam and plastic into an airplane are extremely expensive. Every plane requires its own unique molds. The machines to inject the foam are six figures. The cost of the mold is not far behind. The more scale plastic parts a plane has, the more molds it needs. While labor in China is not super expensive, it has gone up consistently, every year. These are low margin low volume items which are hand assembled and shipped across the ocean. We're a small company and all of these planes are made in very small quantities. Companies like Horizon produce in larger quantities but still had increased costs too. Horizon increased their prices but they did it to mostly to the dealer, not the consumer. They raised our price significantly but not your price.

    We wish we gave a bit of warning to everyone, for that we are sorry. We will still stick to our core values of the best customer service and highest quality RC products. I appreciate all your business over the years and hope you will continue to support Motion RC.

    Leave a comment:


  • JamesonC
    replied
    For me, it really isn't about is the plane really "worth" the money. Worth is in they eye of the beholder. F22 was a perfect example for me. Some saw the original price on that plane incredibly over priced and others saw it very reasonable. So, all that is just an opinion.

    My problem also isn't an increase but the size of the increase. Some of the increases are very large. I just have a pretty hard time believing that they were "getting by" on the old prices but it was gonna take $30-$80 increases to keep everything afloat. If you need to increase prices due to various reasons, fine. But, I don't think that size increase was expected by many. Radios were hit the hardest by Tariffs from what I read and even Spektrum didn't have that big of an increase, AND they warned people it was coming multiple times. And for radio equipment to get hit the hardest, Admiral rxs didn't go up, yet PNP planes did??? :Thinking:

    Either way, I am not gonna bash MRC for doing whatever they needed to for whatever reasons they are. I don't like it and wish they would have handled it better since they have always bragged about being all about the customers. If that was REALLY true, give your customer base a chance to make any purchases they had been considering and on the fence about before such a big increase. But now, like many others, I will just really have to look harder at future purchases and see what else is available. MRC has had a hard time keeping a bunch of stuff I need in stock as well lately, maybe this has something to do with it, don't know. It will be interesting to see if HK, HH, or FMS follow suit with price increases on their products.

    Leave a comment:


  • NoDirt!
    replied
    Well regardless of the bang for the buck, these increases have pushed prices above what I am willing to pay for alot of these aircraft.

    Thank you Washington!

    Leave a comment:

Working...