Official Freewing 110mm F-35C Lightning II Super Scale EDF Jet Thread

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Shaun Evans
    replied
    Nevermind, I got the wheel diameters when I opened the box and measured them. Was just looking for a tiny bit of help....

    Leave a comment:


  • Evan D
    replied
    No. The only fix is to put it on another channel and mix it.

    Leave a comment:


  • DavidsTVBrandon
    replied
    My AfterBurner light comes on at like 20-30% throttle. is there any way to adjust that to like 75%?

    Leave a comment:


  • Ricardopr54
    replied


    Maiden flight day for both of our 110mm F-35s is complete. What a great jet. Check out our tandem flight. I hope that this time MotionRC will show our jets on their next livestream.🀞🏾
    Best jet on my hangar so far. Thank you Freewing and MotionRC for this jet. You all have a great rest of your day. Greetings from Douglas, Arizona, USA πŸŒ΅πŸŒ΅πŸŒ΅πŸ˜πŸ‘πŸΎπŸ‡΅πŸ‡·
    Attached Files

    Leave a comment:


  • Bushong
    replied
    Originally posted by xviper
    Mine is not delivered yet but you say those lights are on a switch, right? Why don't you just leave that switch in the ON position? When the battery is plugged in, the lights are ON.
    I'm trying to get out of using a channel just for the lights.

    Leave a comment:


  • Elbee
    commented on 's reply
    Hi, did you use aileron mixing? V-tail?

  • Giovanbattista
    replied
    Originally posted by Wrex450
    Maidened today and managed to get 7 total flights. I flew 25-30mm aft of the marks. What a great flying plane, power for days, good behaviors all around.

    I setup tailerons and AS3X+. Most surprising was how much momentum it carried on the ground. Also, the inflight sound is incredible.
    Ciao, hai usato la miscelazione degli alettoni? Coda a V?

    Leave a comment:


  • Giovanbattista
    replied
    Hi, did you use aileron mixing? V-tail?

    Leave a comment:


  • xviper
    replied
    Originally posted by Bushong
    Formation Light Controller

    Does anyone know if there is a way to have the formation lights unswitched....so they are on any time the batteries are plugged in. I don't see any way to do it, just thought I would ask.
    Mine is not delivered yet but you say those lights are on a switch, right? Why don't you just leave that switch in the ON position? When the battery is plugged in, the lights are ON.

    Leave a comment:


  • Wrex450
    replied
    Maidened today and managed to get 7 total flights. I flew 25-30mm aft of the marks. What a great flying plane, power for days, good behaviors all around.

    I setup tailerons and AS3X+. Most surprising was how much momentum it carried on the ground. Also, the inflight sound is incredible.

    Leave a comment:


  • Bushong
    replied
    Formation Light Controller

    Does anyone know if there is a way to have the formation lights unswitched....so they are on any time the batteries are plugged in. I don't see any way to do it, just thought I would ask.

    Leave a comment:


  • RCAVI8T0R
    replied
    I am curious on if anyone is flying on the Admiral 6000 pro packs. If so, are you stacking them, or strapping them side by side?

    Leave a comment:


  • Shaun Evans
    replied
    Anyone? Wheel diameters please?

    Leave a comment:


  • flyjets01@gmail.com
    replied
    Just started testing various items on the F35 110mm. Seems my Freewing EG01 6 Axis Gyro needed to be reversed on Elevator.

    I also tested Amp draw this is per battery 100.1 Amps when charged at 4.20 if LHIV charged at 4.35 she pulled per battery 106.1 Amps.

    When setting up the RadioMaster TX16s I needed to increase the Aileron and Elevators to 150 weight to get the Spec control throws.

    I'm also calculating the Thrust at 1.1 very similar to my 8S 90mm F22.


    Leave a comment:


  • RCAVI8T0R
    replied
    Originally posted by xviper
    They look real good as if they were stock.
    I printed them with ASA so they are lite, and the sun doesn't affect them. Makes a nice addition to a very nice plane. Still iffy on flying with them on though.

    Leave a comment:


  • RCAVI8T0R
    replied
    Airplane type: Wing: Flaperon - Tail: Taileron. Install a Y lead to join the flap and aileron on the wing coming from the bluebox in the plane. That worked for me. You will need a 10 channel receiver and completely bypass the stock gyro.
    Click image for larger version

Name:	20260919_085104.jpg
Views:	369
Size:	61.1 KB
ID:	452760
    Click image for larger version

Name:	20260919_085305.jpg
Views:	358
Size:	65.4 KB
ID:	452761​

    Leave a comment:


  • mr150m
    replied
    I would like to know the setup for Spektrum in order to get Flaperons and tailerons. I have the 110mm F-35C with the Freewing gyro that came with it.

    Leave a comment:


  • xviper
    replied
    They look real good as if they were stock.

    Leave a comment:


  • RCAVI8T0R
    replied
    Motion released the STL files for the plane under the "support" tab. I just printed them myself.

    Leave a comment:


  • xviper
    replied
    Does it come with all the missiles and tanks or did you add them from other planes?

    Leave a comment:

Working...