ROBAN 800 size Airwolf Build

[peacemaker66]

Anyone with any information about the landing gear shafts not going through the landing gear

[peacemaker66]

I have the Roban 800 air wolf and I’m having a lot of things not lining up none of my shafts for the landing gear go through did anyone have to drill them out to fit

[Andy1]

Hey Chris,
first off, awesome outcome. Your Lady looks beautiful. Could you talk me through the setup of the servos and the electrics some time, please?
All the best.
Andy

[chrispry201]

So the build is almost complete and is now ready for power on run UPS all the mechanics have been set blade angles are dialed in motor has been checked and verified time for break in. All lights are operational and are programmed with an on and off switch. I have the Aircraft set up with a separate battery for systems and 2 6S in series for the motor independently of each other. this way I will always have power to the Aircraft even if the motor batteries die on me.

[James]

Awesome work Chris! Amazing this is being done in a hotel ;):Cool:

[Cyclone 7]

Since StringFellow Hawk is no longer with us. RIP, I had to recruit George W Bush to fly Airwolf for me!????Hes all ready to go Supersonic!

Or a very convincing Prince Charles - you need to plonk him in an RAF Westland Whirlwind:) Fantastic detail - where did you get him from?

[chrispry201]

Since StringFellow Hawk is no longer with us. RIP, I had to recruit George W Bush to fly Airwolf for me!????Hes all ready to go Supersonic!

[chrispry201]

Day 4 of the Airwolf build. Im at 60% complete on Airframe and 90% electrical avionics. Cockpit and lighting is installed and operational. Guns, camera windows and interior finished. Time for mechanics.

[Cyclone 7]

Looking forward to following your build - very nice kit by the looks of it. I am impressed by the quality, detail & finish from what you have shared so far. :Cool:

[chrispry201]

When installing the vertical stabilizer, take your time and align the mounting holes so that the paint lines up with the tail boom. Also I recommend changing the hardware to stainless steel. The aluminum screws are not good quality and the screws snapped there head when I was tightning them. Prep the vertical pylon with its lights and fittings pryor to installing in the tail boom

[chrispry201]

Here are some more close up pics of the contents of this kit! Very highly detaiked. As I build this kit I will take pictures of each step as I go through the manual. Ive Already found the manual has differences in what the airframe and their pictures look like. Plus they are difficult to see.

[Aros]

:pop :pop :pop

I can live vicariously through you as these are above both my skillset and paygrade. LOL

[chrispry201]

Here are pictures of the contents coming out of the box the quality of this product is superb

[chrispry201]

Follow my thread on my build and set up process for the new 800size Airwolf sold at Motion RC