3530-860Kv Brushless Outrunner Motor Specs

[Relaxibus]

I'm desperately looking to get a full specs sheet for the 3530-860Kv Brushless Outrunner Motor from FlightLine

On the MRC website, there is no full specs listed. Can anyone help?

[xviper]

What kinds of "full specs" are you looking for? Beyond what's given on the Motion site for that motor and the Freewing site, it'll be tough to find any more than that. It's the one used in the B-24.

https://www.motionrc.com/products/flightline-3530-860kv-brushless-outrunner-motor-mo135301

https://www.freewingmodel.com/523.html

[Relaxibus]

All N/A fields: https://www.motionrc.eu/products/fli...motor-mo135301
Or alternative motors do you use?

[xviper]

All N/A fields: https://www.motionrc.eu/products/fli...motor-mo135301
Or alternative motors do you use?

I see. Those N/A fields, I don't consider to be critical for me because I would not use a different motor on a multi like that. When faced with one motor failure in a 4-engined plane, It's a "must" to get a replacement that is another stock one OR, get 4 completely new motors of same brand/kind and replace them all. In such an event, I'd just ensure the basic things like KV, cell rating, amp draw, motor casing diameter and length and perhaps the way the prop adapter/spinner fits. They just have to all fit like the stock motors and all pull the same.

[Relaxibus]

Do you have this motor? If yes, could you provide current consumption with given prop?

[xviper]

I have the B-24 so I have 4 of them. I've never done any measurements. The plane has been functioning very well from day one. It's using the stock props. I don't give it a second thought so long as it's all working. If I ever needed one, I would just go here and buy one and not worry about the specs:

https://www.rc-castle.com/index.php?route=product/product&product_id=7421

[Relaxibus]

Ok, thanks. I don't need the original one. I just needed the specs to compare it with others for UAV. I'm planning to use the A-10 or Bronco wings and tail with a custom fuselage and T-Motors propulsion system. Now for the PoC I got https://store.tmotor.com/goods.php?id=790 (KV950). For the final version probably this one: https://store.tmotor.com/goods.php?id=791 (KV900)