As all of us RC hobbyist know, a field equipment box or bag is a very subjective thing. Some people enjoying various types of carrying bags, others prefer backpacks, and some like tool chests, etc. I have been searching for several weeks to come up with a relatively inexpensive means of transporting all my necessary equipment to and from the field as conveniently and reliably as possible. I searched hundreds, if not thousands of different types and sized bags, cases, trolleys, etc., priced anywhere between $50-500 (although I didn't want to spend that much, but it was important for me to see what was available at a broad range of price points for consideration). There are some amazing RC field bags/boxes out there, but they all have their ideal purposes. For me, I primarily needed something that can carry all my tools, accessories, batteries (sometimes 12 6S 4000-5000mah at a time or more), transmitter, etc. (basically everything but the planes themselves) in one mobile box on wheels that contains organizers to keep everything separate and accessible. It needed be sturdy enough to carry at least 50 pounds, but doesn't need to be of industrial strength. I won't be taking anything off-roading or needing it to withstand falls, etc., and I'm also every careful and considerate of my tools. All these traits may seem like a bit much to ask for, but it was possible and I did indeed find what I was looking for.
First is the Husky 15 Gallon Cantilever Mobile Box (cost me $50), which is the meat and potatoes of my RC Field Box. The box has wheels and a long sturdy handle to roll everything from the car to the flying field and vice versa. It's main feature that peaked my interest was the cantilever top, which has each side extend outwards to reveal the deep space of the inner box, and a max load rating of 80 pounds. Each top side has is a great compartment to store and organize tools, hardware, accessories, etc., and come with great separators that slide into their slots however you choose to organize it. The box has a great space below to fit quite a bit of the larger RC items like transmitters, charger/power supply, LiPo's, etc.
Husky Box Specifications:
You can see in the pictures that I chose not to use all the separators in the two top drawers, only some in one of them. The other top drawer I used to carry an aftermarket (not included with the Husky Box) is a clear snap case with organizer slots (cost about $5 at an art store), which all my small spare parts, Velcro, connectors, glue, hardware, electrical tape, shrink wrap, etc. are in, and must be kept neat and isolated from one another.
I also chose to purchase an aftermarket carrying bag for all my LiPo's. I needed a bag that was extremely sturdy, had a carrying strap, and divided slots to keep the batteries from moving much during transportation. A Husky 9" Square All Trade Bag (going by memory, cost me $30) fit absolutely flawlessly in the Husky Mobile Box. You can see in the pictures that I have nice 6S 5000mah LiPo's in the bag, but I can fit up to 12 of mine in the bag. The bag also has many compartments for additional tools or hardware.
Sometimes it's a bit too dark in my garage to see well (no built-in lighting available), or at the field under the shady trees, so I purchased some battery operated LED lights. They have a magnet on the back to adhere to metal surfaces, a hangar that folds out, and takes three triple A batteries to operate. I chose to Velcro the light to the side of the box, which has plenty of illumination to see in the box and can be easily held like a flashlight if need be. It's a simple and cheap solution for added visibility inside the box in low light conditions.
https://www.amazon.com/gp/aw/d/B00UM...BMWWF43XJ&th=1
I also added some stick on rubber pads on the bottom on all four corners of the underside of the Husky Box for added protection while laying flat.
So far, this box has been great, very easy to find all my RC supplies at the field, keeps things safe, and can fit in my front seat of the car or in the back. Between the cost of the box, the bag I purchased for my LiPo's, and the little LED lights (came with three, but only need and use one), and the little clear snap organizer, I spent about $100. I think that's a darn good deal considering all that I have to show for it in one convenient mobile solution.
Husky Box:
http://m.homedepot.com/p/Husky-15-Ga...0380/207138341
Husky Bag:
http://m.homedepot.com/p/Husky-9-in-...0N14/206923629
First is the Husky 15 Gallon Cantilever Mobile Box (cost me $50), which is the meat and potatoes of my RC Field Box. The box has wheels and a long sturdy handle to roll everything from the car to the flying field and vice versa. It's main feature that peaked my interest was the cantilever top, which has each side extend outwards to reveal the deep space of the inner box, and a max load rating of 80 pounds. Each top side has is a great compartment to store and organize tools, hardware, accessories, etc., and come with great separators that slide into their slots however you choose to organize it. The box has a great space below to fit quite a bit of the larger RC items like transmitters, charger/power supply, LiPo's, etc.
Husky Box Specifications:
- 25.4 in. W x 14.7 in. D x 16.1 in. H
- 3465 cu. in of holding capacity
- Built in organizer with 18 adjustable compartments
- Soft grip extending handle
- 8 in. all-terrain wheels offer mobility on almost any surface
- Unique, cantilever lid design with integrated organizers
- Heavy-duty construction is built to last
- Dual latches for secure closure
You can see in the pictures that I chose not to use all the separators in the two top drawers, only some in one of them. The other top drawer I used to carry an aftermarket (not included with the Husky Box) is a clear snap case with organizer slots (cost about $5 at an art store), which all my small spare parts, Velcro, connectors, glue, hardware, electrical tape, shrink wrap, etc. are in, and must be kept neat and isolated from one another.
I also chose to purchase an aftermarket carrying bag for all my LiPo's. I needed a bag that was extremely sturdy, had a carrying strap, and divided slots to keep the batteries from moving much during transportation. A Husky 9" Square All Trade Bag (going by memory, cost me $30) fit absolutely flawlessly in the Husky Mobile Box. You can see in the pictures that I have nice 6S 5000mah LiPo's in the bag, but I can fit up to 12 of mine in the bag. The bag also has many compartments for additional tools or hardware.
Sometimes it's a bit too dark in my garage to see well (no built-in lighting available), or at the field under the shady trees, so I purchased some battery operated LED lights. They have a magnet on the back to adhere to metal surfaces, a hangar that folds out, and takes three triple A batteries to operate. I chose to Velcro the light to the side of the box, which has plenty of illumination to see in the box and can be easily held like a flashlight if need be. It's a simple and cheap solution for added visibility inside the box in low light conditions.
https://www.amazon.com/gp/aw/d/B00UM...BMWWF43XJ&th=1
I also added some stick on rubber pads on the bottom on all four corners of the underside of the Husky Box for added protection while laying flat.
So far, this box has been great, very easy to find all my RC supplies at the field, keeps things safe, and can fit in my front seat of the car or in the back. Between the cost of the box, the bag I purchased for my LiPo's, and the little LED lights (came with three, but only need and use one), and the little clear snap organizer, I spent about $100. I think that's a darn good deal considering all that I have to show for it in one convenient mobile solution.
Husky Box:
http://m.homedepot.com/p/Husky-15-Ga...0380/207138341
Husky Bag:
http://m.homedepot.com/p/Husky-9-in-...0N14/206923629
Comment