Official wish list for new products.

[TiredIronGRB]

Just make me all of these, start with largest and work your way to the smallest.

[seaviper]

When I see the X-2 all I can think is ...six million dollar man.

I will pass on the F-84 with the "bell bottom" wings...And I don't think the Goblin will do too good on our runway...lol

[crxmanpat]

So Boeing just won the Air Force trainer comp, and it looks like the T-X is going to replace the T-38. OK Motion, time to get busy!

[rifleman_btx]

Very nice!

[lmramos44]

Sweet, looks like about the same wing area as a 38.

[rifleman_btx]

Does have a bit of a Northrop flavor to it doesn't it? With extremely minor references to a f35

[rifleman_btx]

Cool promo video for it.

[tclaridge]

Here are my top two priorities for props. They are simple: 2m super scale OV-10 and Do-335!

For jets, I love the twin 80mm, but I would really like to see a factory installed LED after burner ring! The cool factor is fantastic!

[Skyboy50]

OV-10... 757, why not? Maybe a better citation than Dynam. OHHH... I do like that T-X!

[T-CAT]

I have two posts with wishes/requests, post number 3 and 14, both on Page 1. I’m very happy to see that all three requests in post 14 have become true :Cool::Party: as I see plastic servo pockets and easy EDF hatch access cutouts on the new F-22 90mm EDF jet, and servo arm access pockets on the 80mm EDF L-39 and 90mm EDF F-22.

I am also glad to see great additions to the F-22 like plastic capped intakes, leading edges, and nose cone to reduce potential for damage, concealed hinges (looks SO good especially on the rudders since a F-22 has massive ones and the typically used hinges would stand out like a sore thumb), and plastic lined cockpit.

So, thank you for listening to the many customers over the years!

Also, should or can this thread topic be made a Sticky within the forum to make it easy to refer back to and add wish lists too?

[stereodreieck86]

Let me quote myself (from Youtube)

@MotionRC
Can you please design a BalsaNurflügel, simply because they are gorgeous and superior over conventional airframes, also rare in community and I like to see more NURIs.
Another potential typ of plane would be something like the Carrera Favorit, Graupner Bussard/Junior Sport Plus because there is nothing like it available in Europe (especially)Germany anymore, the last produced models are atleast 15-25years old.

I have a thread on RCGroups called Looking for a high(ish) quality E-Sailplane and the only we could find were the Beinecke ASW24 Semisclae(tiny company) and some planes from esprit models in Czech.

Long story, short; atleast mass-produced ABS, epoxy or fiberglass fuselages should be on the top of priority list because we dont have that in Europe at all ! Here is one more reason; wings are easy to produce at home but fuselages arent because they have to be very precise (better for massproduction)

[Alastair67]

EDF:
80mm A-7 Corsair II
80mm Boeing TX
SEPECAT Jaguar
Mitsubishi F1 or T2

Prop:
1600mm PC-21
1600mm Super Tucano
1600mm T-6C

[Valkpilot]

In order of preference as foamies:

ANY SIZE XB-70

64-70mm 4s
F-100
HAWKER HUNTER
AVRO ARROW(single EDF "cheater")
F4D SKYRAY
F9F COUGAR
F-106 DELTA DAGGER
A-5 VIGILANTE(single EDF "cheater")
F7U CUTLASS(single EDF "cheater")
YF-23(single EDF "cheater")

ANY SIZE XB-70

TWIN 50mm
S-3A VIKING
A-10
ME-262
HO229
F-14
AVRO VULCAN

ANY SIZE XB-70

64mm ONLY
BAE HAWK
DEHAVILLAND VAMPIRE

800-1200mm
DEHAVILLAND MOSQUITO
DEHAVILLAND HORNET
OV-10 BRONCO

And finally, an adapter plug to use XT-60 batteries with JST ESCs.
And did I mention...
ANY SIZE XB-70

[Jpahemi1]

For me I’d like to see three aircraft
1600 mm Fw-190 D9
2000 mm B-29
Sukhoi Su-27 non vectored thrust 80mm fans

if i had to pick just one it would be the Fw-190 D9

[Aros]

A twin 80mm Freewing A-12 Oxcart would be pretty fantastic. (A-12 variant so it doesn't become a gatoring goo mess if it was all black like the SR-71).

[Aros]

And of course I will never stop asking for this bird in super scale, nose-functioning, twin 80mm until the day I die...

[Elbee]

Likin' the T-X a lot, though I have always had a soft spot for the Convair B- 58 Hustler. Possibly, 4 x 64mm EDFs. I'm such a rookie here, don't know if that is even possible with wing-loading. Still cool looking even today. Best, LB

[Dirty Dee]

A twin 80mm Freewing A-12 Oxcart would be pretty fantastic. (A-12 variant so it doesn't become a gatoring goo mess if it was all black like the SR-71).

I've been doing some investigating into an SR71 or A12 for twin 70s, and it seems that it needs to be ~1/15 scale if you plan to use the shock cones and not have any cheaters. about 2.2m long, 1.1m wingspan.

[Elbee]

DD, That's a Big Guy for sure. Are you figuring less than 10 pounds with batts? Best, LB

[Valkpilot]

And of course I will never stop asking for this bird in super scale, nose-functioning, twin 80mm until the day I die...

Be careful what you wish for: https://www.turbines-rc.com/en/conco...-145m-arf.html