Well I bought the fms A10..

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • gooniac33
    replied
    Originally posted by rifleman_btx
    Here's what I did and it locks down the push rod and keeps it straight
    I thought about doing the same sorta thing.. Good idea!

    Leave a comment:


  • rifleman_btx
    replied
    Here's what I did and it locks down the push rod and keeps it straight

    Leave a comment:


  • rifleman_btx
    replied
    Also did a small mod to fix what I think was the cause of the steering slop although mine didnt show any, I took and made a support piece for the pushrod to slide though so it doesn't fold out and cause the wheel to turn uncontrolled. So far it's good and solid

    Leave a comment:


  • rifleman_btx
    replied
    Absolutely, they did great, I doubt though I'll have them by the weekend since Independence Day is tomorrow. But it's all good, another thing I'm having to watch is on my takeoff rotation with this one. It really wants to rip off the ground fast and in my opinion too high an angle, I was really lucky I didnt stall the thing right off the bat. So yeah I'm gonna keep working on that in my head until i get the escs and i can put her on the field again.

    Leave a comment:


  • gooniac33
    replied
    Originally posted by rifleman_btx
    Called horizon, got two new escs coming in warranty. :Cool:
    Good thing you got it from Horizon! They take care of things right away! FMS will take care of you too if you put in a claim. It just takes a lil longer...

    Leave a comment:


  • rifleman_btx
    replied
    In the end I'm really probably going to end up doing that and ordering the setup for the freewing A10. So far those escs atleast the smaller ones in the P38 and tigercat have been rock solid. As mater of fact, I I still have one them from my first P38 still going strong in my large fx79 wing.:Cool:

    Leave a comment:


  • MOFO1
    replied
    Rifleman scrap those ESCs. I had two fail on me. One from the box the second was the warranty replacement on a bench test. If you read the RCG thread you will find that others have had issues with the ESCs. Replaced mine with a brand that I have had success with and no problems since then. JMO scrap them I would not trust them. Good luck.

    Leave a comment:


  • rifleman_btx
    replied
    I did wrench on my landing gear very hard. The wing is gonna snap before the gear comes out. Its locked in tight. The nose gear is pretty much the same way and I didnt feel like breaking anything else at the moment

    Leave a comment:


  • rifleman_btx
    replied
    Originally posted by gooniac33
    It is an awesome bird bro!! I have one and love it! You need not worry about weight tho. When I started flying mine I used a 6s 3c 6200mah pack and it flew light as a feather but long flight time. I have since settled on a 5000mah pack only because I used the 6200s for another bird. But the lighter 4500 may not go as you want. The plane likes the weight. At least that is how I feel about it.
    Yeah it did fly well for me, with the weights I added I feel like it did really nice in the air. And flew pretty slow although it kinda had to with one motor dead. As for the plane I think its great

    Leave a comment:


  • rifleman_btx
    replied
    Called horizon, got two new escs coming in warranty. :Cool:

    Leave a comment:


  • gooniac33
    replied
    Originally posted by rifleman_btx
    It flew great, all the way until the esc burned out on the first lap... so phone call to tower in the morning ... luckily I was able to land uneventfully as well.
    Oh man..... I didn't read this part yet.... UGH!!! FMS will take care of you...

    Leave a comment:


  • gooniac33
    replied
    It is an awesome bird bro!! I have one and love it! You need not worry about weight tho. When I started flying mine I used a 6s 3c 6200mah pack and it flew light as a feather but long flight time. I have since settled on a 5000mah pack only because I used the 6200s for another bird. But the lighter 4500 may not go as you want. The plane likes the weight. At least that is how I feel about it.

    Leave a comment:


  • Elbee
    replied
    Originally posted by rifleman_btx
    It flew great, all the way until the esc burned out on the first lap... so phone call to tower in the morning ... luckily I was able to land uneventfully as well.

    Riflemanbtx, SUX BIG TIME. Hope it is just a blip and CS will come through for you. Best, LB

    Leave a comment:


  • rifleman_btx
    replied
    Yes indeed, I'm on the phone with them now. And that's what I am gonna say

    Leave a comment:


  • MikeT
    replied
    Originally posted by rifleman_btx
    It flew great, all the way until the esc burned out on the first lap... so phone call to tower in the morning ... luckily I was able to land uneventfully as well.
    Be sure and tell product support it was bad right out of the box. Things have changed on how warranty's are being handled and the bad right outta the box will cover that .

    Mike

    Leave a comment:


  • rifleman_btx
    replied
    Too expensive for me in dollars and room.

    Leave a comment:


  • AZFlyer
    replied
    Why did you go with the FMS and not the Freewing? The Freewing A-10 is a great plane.

    Curious

    Leave a comment:


  • rifleman_btx
    replied
    Me too, ugh that was just a big let down today

    Leave a comment:


  • bbaumer
    replied
    With Tower being Horizon now, I hope you have a good experience

    Leave a comment:


  • rifleman_btx
    replied
    Roger that, will do

    Leave a comment:

Working...