GWS C-47 Sky Train

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • Tate
    RC Mechanic

    • Nov 2018
    • 41
    • SLC, Utah
    • Send PM

    #1

    GWS C-47 Sky Train

    Man it's been a Looooong time since I've seen a GWS plane.
    I used to fly these all the time back in the day so when we picked up a stray noobie (Zach) it seemed like the right time to track one down to break him in.

    Sure blindsiding him and Wyatt like this might seem harsh it was totally worth it.

    Enjoy the insanity and stick around to see if they can get this thing off the ground.

  • meadowhay
    Member

    • Jan 2017
    • 67
    • Send PM

    #2
    Back in the day GWS was the main event!
    I had a few and recently discovered a C-130 kit and a part-built A-10 in my late dad's stash of models, so it's probably a good time for a bit of nostalgia :Cool:

    Comment

    • Kloverzero
      JetManMichael

      • Dec 2015
      • 513
      • Conway SC
      • Send PM

      #3
      A friend of mine stumbled across not one, but two GWS C-130 kits. I converted one of them into a brushless 4 motor set up. Paining it was interesting, as no matter how much latex primer I applied, spray paint still got through and ate the foam!! In the end, it turned out pretty nice. First flight, it wound up in a flat spin and splashed down in a pond. My friend took it home, and I do not think it has been in the air since....Graphics are by Callie


      Click image for larger version

Name:	GWS.jpg
Views:	650
Size:	106.4 KB
ID:	166135
      Click image for larger version

Name:	GWS1.jpg
Views:	753
Size:	114.4 KB
ID:	166136

      Comment

      • bradl4648
        Your Motion RC CS Team Rep

        • Oct 2014
        • 369
        • Send PM

        #4
        Yea that did come out pretty good. Good old GWS nice planes but far from an arf that they use to advertise. They were like Dynam only Dynam is a better then they were.

        Comment

        • rifleman_btx
          me

          • Dec 2016
          • 5246
          • West Point TX
          • Send PM

          #5
          What i did like about them was you could put your own power systems in their planes. And electronics. The ones i had, the corsair, mustang and spitfire all flew very well.

          Comment

          • meadowhay
            Member

            • Jan 2017
            • 67
            • Send PM

            #6
            15 yr old (and rather dusty!) GWS Corsair hanging in the cellar. This model started with the supplied brushed motor and became the first model that I used a brushless, Lipo system in.
            From what I recall, the performance improvement was staggering, but expensive!
            I really should dust this one off and get her flying again.

            Comment

            • Tate
              RC Mechanic

              • Nov 2018
              • 41
              • SLC, Utah
              • Send PM

              #7
              Expensive is right. My first Lipo cost me close to $100 for an 800mah 3 cell! But oh was that weight savings worth it.

              Comment

              • Alpha
                Former Motion RC Staff

                • Feb 2015
                • 4110
                • The North Pole
                • Send PM

                #8
                Better than those sub-C cells! The good ol' days!
                Live Q&A every Tuesday and Friday at 9pm EST on my Twitch Livestream

                Live chat with me and other RC Nuts on my Discord

                Camp my Instagram @Alpha.Makes

                Comment

                • meadowhay
                  Member

                  • Jan 2017
                  • 67
                  • Send PM

                  #9
                  Originally posted by Alpha.MotionRC
                  Better than those sub-C cells! The good ol' days!
                  Yup...Nostalgia ain't what it used to be :)

                  Comment

                  • meadowhay
                    Member

                    • Jan 2017
                    • 67
                    • Send PM

                    #10
                    Originally posted by Tate
                    Expensive is right. My first Lipo cost me close to $100 for an 800mah 3 cell! But oh was that weight savings worth it.
                    I think mine was also an 800mAh 3 cell and cost £50 or so for a whopping 10C of power! Never looked back though.

                    Comment

                    • Kloverzero
                      JetManMichael

                      • Dec 2015
                      • 513
                      • Conway SC
                      • Send PM

                      #11
                      I had the A-10 with the brushed motors in it long before I even knew what a lipo and brushless was (I was still flying nitro back then). Never could get that thing to stay in the air, but it looked good....for a little while anyway, LOL

                      Comment

                      • rifleman_btx
                        me

                        • Dec 2016
                        • 5246
                        • West Point TX
                        • Send PM

                        #12
                        Back when edf was; ok its up.. and it looks like a leaf in the wind.. lol

                        Comment

                        Working...