Official Skynetic 900mm Sbach 342 3D Discussion Thread

[Aros]

Sbach 342 3D 900mm (35.4") Wingspan - ARF BUNDLE from Skynetic - SKY1014-002

Click here for the official product page

The Skynetic Sbach 342 EPP 3D is a 3D flyer made of durable, lightweight and extremely thick EPP foam for rigidity that can help you perform show-stopping indoor 3D maneuvers with ease. Both wing and gear are easily removable for transport and/or flying preference. Can be flown both indoors in a large area like a gym or outside. With a streamlined and aerodynamic profile, the Sbach 342 EPP 3D is tailor-made for countless hours of exhilarating, crash-resistant flying fun!
FEATURES:

• Slick, streamlined and aerodynamic profile with sharp red and black livery
• Extremely thick and nearly indestructible EPP foam for a high level of crash resistance
• Powerful AS2212 KV1250 Brushless motor for a wide flight performance envelope

INCLUDES:

• Skynetic Sbach 342 3D 900mm (35.4") Wingspan - ARF BUNDLE
• AS2212 KV1250 Brushless motor
• 30 amp brushless ESC with XT60 connector
• 4x 8g micro servos

REQUIRES:

• 4 Channel radio - select a minimum 4 channel radio from our Radio Collection
• 4 Channel receiver - select a minimum 4 channel receiver from our Receiver Collection
• 3 Cell 11.1V 1000 - 1200mAh Li-Po battery with XT60 connector - we recommend EPR10003X6
• 3 Cell compatible battery charger - select a minimum 3 cell (3S) charger from our Charger Collection

PRODUCT SPECIFICATIONS:

AGE LEVEL : 14 AND UP
SKILL LEVEL : INTERMEDIATE
BUILD TIME : 5 HOURS

Wingspan	35.4in / 900mm
Length	39.0in / 990mm
Flying Weight	530 - 560g
CG (Center of Gravity)	95 - 100mm from the leading edge of the wing at the root
Power System	Powerful AS2212 KV1250 Brushless motor (installed)
Electronic Speed Control	30 amp brushless ESC with XT60 connector (installed)
Propeller / EDF	Electric propeller
Servos	4x 8g micro servos
Landing Gear	Fixed
Required Battery	3 Cell 11.1V 1000 - 1200mAh Li-Po battery with XT60 connector (required)
Required Radio	4+ channel radio system (required)
Ailerons	Yes
Elevator	Yes
Rudder	Yes
Flaps	No
Lights	No
Hinge Type	Foam
Material	EPP Foam
Skill Level	Intermediate
Build Time	5 Hours
Recommended Environment	Indoor/Outdoo

[SnoPark]

Its very disappointing that the assembly documentation is still incorrect and customer service is no help. The plane components you receive are very different from the old instructions. Its too bad, because obviously the new plane design is better.