Official 750mm F4U-1 Corsair PNP Thread

[Aros]

F4U-1 Corsair 750mm (29.5") Wingspan - PNP from Skynetic - SKY1067-001

The Skynetic 750mm F4U-1 Corsair in the "Lucybelle" livery is a fantastic micro-category version of this classic WWII warbird with excellent attention paid to the impressive scale look and details such as drop tanks and ordnance package, the likes of which is rarely found in a micro-classed aircraft. The bolt-on wing is easy to remove or install for ease of transport or storing. A nimble performer with scale appeal, the Skynetic 750mm F4U-1 Corsair is a welcomed addition to any pilot's hangar.

Impressive Scale Profile The Skynetic F4U-1 Corsair boasts an impressive scale profile for a micro-class R/C model. Whether it's in the air or on static display, the Corsair looks the part.

Ordnance Package Included The ordnance package and drop tanks really enhance the scale appeal and is another extension beyond your typical "micro".

Scale 3-Blade Propeller Yet another key scale touch, the Corsair comes with a scale 3-blade propeller for both accurate profile as well as performance.

Conveniently Sized At a wing just under 30 inches and easy to install and remove, the Corsair is extremely easy to store and transport to and from the field.

Features:

• Nice scale appeal complete with "Lucybelle" livery
• Ordnance package and drop tanks to enhance the scale appeal
• Removable landing gear for flight preference or ease of transport
• Easy to install or remove bolt-on wing
• Scale 3-blade propeller

Includes:

• Skynetic F4U-1 Corsair 750mm (29.5") Wingspan - PNP
• Motor, ESC and 4x 9g servos pre-installed
• Ordnance set
• Drop tank set
• Instruction manual

Requires:

• 4 Channel radio - select a minimum 4 channel radio from our Radio Collection
• 4 Channel receiver - select a minimum 4 channel receiver from our Receiver Collection
• 3 Cell 11.1V 1000-2000 mAh LiPo battery with JST connector - we recommend the Admiral 1000mAh 3S 11.1V 30C LiPo Battery with JST Connector
• 3 Cell compatible battery charger - select a minimum 3 cell (3S) charger from our Charger Collection

Product Specifications:

AGE LEVEL :14 and up
SKILL LEVEL :intermediate
BUILD TIME :1 hour

Model Scale	N/A
Wingspan	750mm / 29.5in
Length	610mm / 24.0in
Weight	420g / 16.1oz
CG (Center of Gravity)	45mm from the leading edge of the wing root
Power System	DST-1300 brushless motor (included)
Electronic Speed Control	20A with JST connector (included)
Propeller / EDF	3-Blade (included)
Servos	4x 9g standard (included)
Landing Gear	Removable
Required Battery	3 Cell 11.1V 1000-2000 mAh LiPo battery with JST connector (required)
Required Radio	4+ Channel (required)
Ailerons	Yes
Elevator	Yes
Rudder	Yes
Flaps	No
Lights	No
Hinge Type	Foam
Material	EPO Foam
Skill Level	Intermediate
Build Time	1 Hour
Recommended Environment	Outdoors

[Aros]

I can't wait to get my hands on this girl. Wow. For such a small size she fits the bill with the ordnance, tanks...I don't even care if those factors slow her down. I can't wait to get her in the air, fully dirty configuration. Love this model!

[Aros]

Alright flown once. Squirrelly girl, snap rolled on me on final for no good reason. So I broke a prop. I am trying to take the dang prop hub off and it will not budge. Anyone have ideas?

[davegee]

Alright flown once. Squirrelly girl, snap rolled on me on final for no good reason. So I broke a prop. I am trying to take the dang prop hub off and it will not budge. Anyone have ideas?

Can you try carefully removing parts of it with a saw tool on a dremel? That's where I would start to try and loosen up that remaining part until it breaks into pieces. You'd have to go very carefully, and maybe use some closeup lighted lenses to see it better to be sure you don't damage the metal prop shaft part of the model.