Callie Graphics

FMS F4U 1700mm Corsair

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • Sky King
    Hobby Squawk Senior Pilot

    • Feb 2017
    • 2
    • Belleville. IL 62221
    • Send PM

    #1

    FMS F4U 1700mm Corsair

    CG question. The original 120mm back from leading edge was changed to 100mm back on strong advise from another builder on U Tube. But this turns out to be way too forward. What are other owners of the Corsair using for CG range?
  • bradl4648
    Your Motion RC CS Team Rep

    • Oct 2014
    • 369
    • Send PM

    #2
    Hi do not forget to have the gear in the retracted position on this plane (gear in the wheel wells) do to the tires go AFT. If you balance this plane gear down it will be tail heavy when you retract them. Once you deploy the gear it will be a little nose heavy but that will not hurt a thing.

    Comment

    • xviper
      Hobby Squawk Regular

      • Jan 2014
      • 8814
      • Calgary, Canada
      • Send PM

      #3
      I can't remember exactly where I balanced mine but you do realize that it is a given that you need many, many ouces of lead in cowl to make it work. A forward CG will make this plane fly better and safer but it needs a lot of additional lead weight stuck around the inside of that round cowl. I recall mine has 5 to 6 ounces of those sticky tire balance weights, maybe more.

      Comment

      • TiredIronGRB
        Post-Apocalyptic Tactical Consultant

        • Jan 2016
        • 3986
        • Church Hill, Tennessee
        • Send PM

        #4
        Mine (V2) balances with a 6S 4000 with no weight.
        TiredIron Aviation
        Tired Iron Military Vehicles

        Comment

        • xviper
          Hobby Squawk Regular

          • Jan 2014
          • 8814
          • Calgary, Canada
          • Send PM

          #5
          Originally posted by TiredIronGRB
          Mine (V2) balances with a 6S 4000 with no weight.
          That's quite amazing. Most I've seen and read about use a 5000mah bat and still need gobs of lead. There are 2 at my field and both are loaded. I've also seen this in the RCG thread. Mind you, this may only be with V1.

          Comment

          • TiredIronGRB
            Post-Apocalyptic Tactical Consultant

            • Jan 2016
            • 3986
            • Church Hill, Tennessee
            • Send PM

            #6
            Originally posted by xviper2
            That's quite amazing. Most I've seen and read about use a 5000mah bat and still need gobs of lead. There are 2 at my field and both are loaded. I've also seen this in the RCG thread. Mind you, this may only be with V1.
            The V2 has the metal motor mount so that may be part of it.
            TiredIron Aviation
            Tired Iron Military Vehicles

            Comment

            • TiredIronGRB
              Post-Apocalyptic Tactical Consultant

              • Jan 2016
              • 3986
              • Church Hill, Tennessee
              • Send PM

              #7
              I just rechecked mine and it balances at 110mm.
              TiredIron Aviation
              Tired Iron Military Vehicles

              Comment

              • 0nemildot
                Member

                • Feb 2017
                • 17
                • Send PM

                #8
                Any reason not to use a larger battery to address the CG issues without lead up front? I have been on the fence for a long time and am getting closer, Would a 6000mah 6s or 2 3300mah in parallel fit?

                Seems this bird flies well, but has a bad history of hit or miss QC issues. You guys flying new ones like them?

                Comment

                • redtwilight
                  Hobby Squawk Student Pilot

                  • Dec 2016
                  • 47
                  • Hurdle Mills, NC
                  • Send PM

                  #9
                  I've got a 5000mah battery shoved all the way forward, a second 2s 2200 LiFe flight battery just under the fore edge of the hatch, one of the sound systems transducers, and 4oz of weight in the cowl. Balanced it at 110mm and it flies wonderfully. 100mm CG was waaaayyyyy too nose heavy on its first flight.

                  Comment

                  • Sky King
                    Hobby Squawk Senior Pilot

                    • Feb 2017
                    • 2
                    • Belleville. IL 62221
                    • Send PM

                    #10
                    I've got the V2 also. Flew it at 100mm first flight with half up elevator . Sort of landed crashed with 1/3 power. A new wing later I've settled on 110mm with the gear tucked up. With a 4000 Admiral and 4oz of lead in the nose cowl its ready for Spring and flite 2.

                    Comment

                    Working...