RotorScale B222 Shadow Black 450 Size Helicopter - ESC Programming

[ghill121@verizon.net]

Does anyone know how I can correct this problem:

1. Input voltage is abnormal: The ESC will measure the input voltage the moment when it’s powered on. The motor will keep beeping “BB, BB, BB” (the interval between two BBs is 1 second) when the input voltage is beyond the normal range. The warning tone won’t stop until the voltage turns normal.

Battery: 6s 22.2v 30C 1100mAh Admiral
T: Futaba 6J-2.4GHz
R: R2006GS
ESC: 40A Brushless with XT60 connector - Platinum
Microbeast Plus

Any assistance is greatly appreciated. Thanks in advance.

[F106DeltaDart]

Does anyone know how I can correct this problem:

1. Input voltage is abnormal: The ESC will measure the input voltage the moment when it’s powered on. The motor will keep beeping “BB, BB, BB” (the interval between two BBs is 1 second) when the input voltage is beyond the normal range. The warning tone won’t stop until the voltage turns normal.

Battery: 6s 22.2v 30C 1100mAh Admiral
T: Futaba 6J-2.4GHz
R: R2006GS
ESC: 40A Brushless with XT60 connector - Platinum
Microbeast Plus

Any assistance is greatly appreciated. Thanks in advance.

The newer 450s require a 4S battery, so the 6S is over the voltage limit for the ESC. The old version 1 ESCs were for 6S, but didn't have the functionality of the newer ones including the built in governor and soft start.

[ghill121@verizon.net]

4S battery worked! Thanks.