First off, I own several helis, Goblins, OMP's BLades and so on. I purchased the FW450L v3 to just have some fun. I flew it twice for about 16 minutes in total, went up to fly on another day and it tilted over, could not get it to fly, GPS is a go, locked in, after looking at it and connecting to pc with blades off I put it in 3d to see the movement of the servos and I have 2 servos, the back servo and the right servo that will not move when I give it input with the transmitter. I can move the servos by hand with it off put when I try with stick input or set it up to fly on ground and get gyro locked in, I with blades off outside give it throttle and pick it up and tilt so gyro will correct it as in real flight only the left servo again will move to move the head, the back and right will not move. I purchased a spare servo and put it in the H1 and the new servo would not respond to stick movement, didn't put it on heli, just held it in hand connected into H1.
I am stumped, brand new heli with 2 flights, any help would be appreciated.
I am stumped, brand new heli with 2 flights, any help would be appreciated.
Comment