has any one had motor problems with the pandora? mine wont start.
-
-
Re: motor wont turn
Are the servos working? It sounds like you have not programmed your ESC. Is the ESC's wire connection into your receiver correctly positioned into the number 3 slot and not inserted upside down?
If you have Futaba radio or Tactic radio, you need to set the throttle on reverse, and then program it. Let is know if you get the motor to run. IF not please call Motion RC and they will be able to help.You can view Motion's tutorial video about arming an FMS brand ESC. It is very simple to arm the ESC and this might help.
http://www.motionrc.com/video-tutorials/ -
Re: motor wont turn
+1 To what Baron said. I friend of mine and I both have them as our first planes and it took us watching the video to get it right and reversing the throttle channel as we both have Futabas.Comment
-
Re: motor wont turn
With my Spectrum DX6i, I have to retard the trim on the throttle all the way, then give it a bit of throttle, it will start, then move the trim back to the neutral position. Then all is well, til you change the battery, then repeat...Team Gross!Comment
-
Re: motor wont turn
Hmmmm...The Pandora is my first plane too. Running with the DX6i and AR6210. Have not had any issues. Have at least 75 flights under my belt with it. Last 25 flights in the low wing tail dragger configuration...Lon
EFlite F-16 80mm, EFite DRACO, EFlite Night Radian, E-Flite P51 1.5m
Freewing A-10 80mm, F-86 80mm, F-15 90mm, F-16 90mm. Avanti. FMS DHC-2 Beaver, Fliteline P-38L ,HSD HME-262, HSD F86.Comment
-
Re: motor wont turn
thank you for input ,i had to program the esc duh.i am new to r/c planes lots to learn thanks r&bComment
Comment