Radio Info?

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • Snoopy47
    LRM8181943

    • Nov 2017
    • 9
    • Longview, Texas
    • Send PM

    #1

    Radio Info?

    Can you guys please tell me about these:

    https://www.motionrc.com/collections...sky-x10-silver

    Since I am returning to R/C there are a few new brands of radios that I am unfamiliar with.
  • PappaBear
    MotionRC.Tech support, Experienced Pilot

    • May 2015
    • 377
    • California
    • Send PM

    #2
    Hi Snoopy,

    Motion RC has just started carrying the line of FrSky radios and they are new to us. However, please see the link below which includes a video that gives a brief insight into them.

    ​​​​​​https://www.motionrc.com/collections...lver#video-tab

    Martin.

    Comment

    • U-2
      Member

      • Nov 2017
      • 4
      • Send PM

      #3
      Hello, I am relatively new to RC airplanes. I have a Spektrum DX-8 and am wondering if that Admiral RX1000 10 channel receiver that MotionRC has advertised will bind to my radio and just operate the first 8 channels? Or am I limited to only an 8 channel receiver? Does anybody know?

      Comment

      • TiredIronGRB
        Post-Apocalyptic Tactical Consultant

        • Jan 2016
        • 3986
        • Church Hill, Tennessee
        • Send PM

        #4
        Originally posted by U-2
        Hello, I am relatively new to RC airplanes. I have a Spektrum DX-8 and am wondering if that Admiral RX1000 10 channel receiver that MotionRC has advertised will bind to my radio and just operate the first 8 channels? Or am I limited to only an 8 channel receiver? Does anybody know?
        Welcome to Hobby Squawk! Yes, you're exactly right...it will work on 8 channels just fine.
        TiredIron Aviation
        Tired Iron Military Vehicles

        Comment

        • fhhuber
          Senior Member

          • Aug 2015
          • 1476
          • Send PM

          #5
          We've used 4 ch transmitters with 6 to 8 channel receivers for over 30 years. We've also used 4 channel receivers with 6 to 18 channel transmitters.
          No problems as long as the receiver's frequency and encoding protocols match the transmitter.

          Actually ALL of the old 72 mhz receivers processed 8 channels of data, (same for the transmitters) and its similar for the 2.4 ghz (based on 8 or 10 "real" channels based on brand). They just "play games" splitting the last 1 or 2 "real" channels to get the extras for "X Plus (Spektrum) or whatever the other brands are calling their extra channels.

          About 15 years ago there was a company selling an add-on encoder/decoder set to convert ANY single channel (choose by which channel on the RX you plug it into and where you wire it on the TX) for 8 on-off functions. Those little devices still work if wired into any modern radio. (but not on the X-Plus added channels, which have already been split from a single channel (channel 10) using a similar technique)
          FF gliders and rubber power since 1966, CL 1970-1990, RC since 1975.

          current planes from 1/2 oz to 22 lbs

          Comment

          • U-2
            Member

            • Nov 2017
            • 4
            • Send PM

            #6
            Thanks for the answer. It is good news.

            Comment

            Working...