I have a Freewing F18 with a Admiral 7 channel receiver with telemetry
The F18 has an external bec. So my connections are as so
Ch 1 Throttle
Ch 1 Aile
Ch 3 Elevator
Ch 4 Rudder
Ch 5 Gear
Ch 6 Flaps
Ch 7 BEC
So with this setup all my servo ports are used up.
This does not leave me with a channel for running a wire from the A3L to the receiver to program a switch on my radio.
On Motion RC's website I see that their receivers jumps from 7 channel to 10 channel.
However the 10 channel receivers do not have telemetry.
Is there another way I can connect the A3L to the 7 channel receiver so I can program a switch to turn the gyro on and off?
Or do I have to make a decision on having no switch with telemetry vs having a 10 channel receiver with no telemetry but I can program a switch?
The F18 has an external bec. So my connections are as so
Ch 1 Throttle
Ch 1 Aile
Ch 3 Elevator
Ch 4 Rudder
Ch 5 Gear
Ch 6 Flaps
Ch 7 BEC
So with this setup all my servo ports are used up.
This does not leave me with a channel for running a wire from the A3L to the receiver to program a switch on my radio.
On Motion RC's website I see that their receivers jumps from 7 channel to 10 channel.
However the 10 channel receivers do not have telemetry.
Is there another way I can connect the A3L to the 7 channel receiver so I can program a switch to turn the gyro on and off?
Or do I have to make a decision on having no switch with telemetry vs having a 10 channel receiver with no telemetry but I can program a switch?
Comment