Callie Graphics

You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

DX6i Landing Gear Timing - Can It Be Done?

Collapse
X
Collapse
First Prev Next Last
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    DX6i Landing Gear Timing - Can It Be Done?

    Greetings Gang,

    Does anyone happen to know if/how the DX6i can be configured to slow down the landing gear up and down speed?
    I know that the DX8 has a landing gear timer but, I don't have a DX8, I do have a DX6i.

    Thanks in advance,

    Bill L.
    in Okla.
    Tags: None
  • #2
    Re: DX6i Landing Gear Timing - Can It Be Done?

    What kind of landing gear? If you have the all-electronic type, they can't be changed with the radio settings.

    Comment

    • #3
      Re: DX6i Landing Gear Timing - Can It Be Done?

      Greetings WintrSol,

      My bad, I suppose I could have been a bit more forthcoming on information.
      The retracts I'm wanting to alter the timing of are the 90' pinion gear driven retracts found on the Flyzone Corsair.

      I have seen a video on YouTube of this plane where the gear travel speed was manipulated (slowed) using gear timer setting on a DX8 transmitter.

      The Flyzone default travel speed is quite snappy as you can see in the MRC product video.

      I realize I could use a circuit speed controller to accomplish a slower travel speed, it just seemed cleaner to be able to do it through my DX6i transmitter if possible. It may be a feature that wasn't available until the DX8.

      Thanks,
      Bill L.
      in Okla.

      Comment

      • #4
        Re: DX6i Landing Gear Timing - Can It Be Done?

        Bill,

        You can't change retract speed with the DX6i.
        Wanted to slow down the flaps/retracts on my A6 but couldn't, so that was the excuse needed to upgrade to the DX8. Am much more pleased with that units capabilities.
        Regards,
        CB
        Warbird Charlie
        HSD Skyraider FlightLine OV-10 FMS 1400: P-40B, P-51, F4U, F6F, T-28, P-40E, Pitts, 1700 F4U & F7F, FOX glider Freewing A-6, T-33, P-51 Dynam ME-262, Waco TF Giant P-47; ESM F7F-3 LX PBJ-1 EFL CZ T-28, C-150, 1500 P-51 & FW-190

        Comment

        • #5
          RE: DX6i Landing Gear Timing - Can It Be Done?

          X-Mailer: Microsoft Office Outlook 12.0
          Thread-Index: Ac/ccDPEBiwtUfGAStmX+coBp03Q7QAMg0uw
          Content-Language: en-us
          X-SA-Exim-Connect-IP: 209.85.218.44
          X-SA-Exim-Mail-From: leyrerwa@cableone.net
          X-SA-Exim-Scanned: No (on joe.nabble.com); SAEximRunCond expanded to false

          This is a multi-part message in MIME format.

          ------=_NextPart_000_009E_01CFDC79.64DAD410
          Content-Type: text/plain;
          charset="us-ascii"

          Greetings CB,



          Yeah, it took me a while to accept that the DX6i couldn't help me with
          altering my LG servo motion speed.



          I suppose there's always the ever faithful OOOPPS! And blame the rest on
          gravity.

          Then it's "Hello, DX8"!!



          Just a thought...



          I'd be interested in how the servo speed function operates once you've had a
          chance to work with it, if you wouldn't mind?



          Thanks



          Bill L.



          From: OV10 [via Motion RC Forum]
          [mailto:ml-node+s1075610n4368h51@n5.nabble.com]
          Sent: Tuesday, September 30, 2014 12:34 AM
          To: Rocketeer
          Subject: Re: DX6i Landing Gear Timing - Can It Be Done?



          Bill,

          You can't change retract speed with the DX6i.
          Wanted to slow down the flaps/retracts on my A6 but couldn't, so that was
          the excuse needed to upgrade to the DX8. Am much more pleased with that
          units capabilities.
          Regards,
          CB



          _____

          If you reply to this email, your message will be added to the discussion
          below:

          http://motion-rc-forum.1075610.n5.nabble.com/DX6i-Landing-Gear-Timing-Can-It
          -Be-Done-tp2398p4368.html

          To unsubscribe from DX6i Landing Gear Timing - Can It Be Done?, click here
          <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?macro
          =unsubscribe_by_code&node=2398&code=bGV5cmVyd2FAY2 FibGVvbmUubmV0fDIzOTh8LTE3
          MTM2OTA4Njc=> .

          <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?macro
          =macro_viewer&id=instant_html%21nabble%3Aemail.nam l&base=nabble.naml.namespa
          ces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.
          template.NodeNamespace&breadcrumbs=notify_subscrib ers%21nabble%3Aemail.naml-
          instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.nam
          l> NAML


          ------=_NextPart_000_009E_01CFDC79.64DAD410
          Content-Type: text/html;
          charset="us-ascii"

          <html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
          xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
          xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
          xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
          xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
          http-equiv=3DContent-Type content=3D"text/html; =
          charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 12 =
          (filtered medium)"><!--[if !mso]><style>v\:* =
          {behavior:url(#default#VML);}
          o\:* {behavior:url(#default#VML);}
          w\:* {behavior:url(#default#VML);}
          .shape {behavior:url(#default#VML);}
          </style><![endif]--><style><!--
          /* Font Definitions */
          @font-face
          {font-family:"Cambria Math";
          panose-1:2 4 5 3 5 4 6 3 2 4;}
          @font-face
          {font-family:Calibri;
          panose-1:2 15 5 2 2 2 4 3 2 4;}
          @font-face
          {font-family:Tahoma;
          panose-1:2 11 6 4 3 5 4 4 2 4;}
          /* Style Definitions */
          p.MsoNormal, li.MsoNormal, div.MsoNormal
          {margin:0in;
          margin-bottom:.0001pt;
          font-size:12.0pt;
          font-family:"Times New Roman","serif";}
          a:link, span.MsoHyperlink
          {mso-style-priority:99;
          color:blue;
          text-decoration:underline;}
          a:visited, span.MsoHyperlinkFollowed
          {mso-style-priority:99;
          color:purple;
          text-decoration:underline;}
          span.EmailStyle17
          {mso-style-type:personal-reply;
          font-family:"Calibri","sans-serif";
          color:#1F497D;}
          .MsoChpDefault
          {mso-style-type:export-only;}
          @page WordSection1
          {size:8.5in 11.0in;
          margin:1.0in 1.0in 1.0in 1.0in;}
          div.WordSection1
          {page:WordSection1;}
          --></style><!--[if gte mso 9]><xml>
          <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
          </xml><![endif]--><!--[if gte mso 9]><xml>
          <o:shapelayout v:ext=3D"edit">
          <o:idmap v:ext=3D"edit" data=3D"1" />
          </o:shapelayout></xml><![endif]--></head><body lang=3DEN-US link=3Dblue =
          vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>Greetings CB,<o:p></o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>Yeah, it took me a while to accept that the DX6i couldn’t help =
          me with altering my LG servo motion speed.<o:p></o:p></span>
          <p =
          class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>I suppose there’s always the ever faithful OOOPPS! And blame =
          the rest on gravity.<o:p></o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>Then it’s “Hello, DX8”!!<o:p></o:p></span>
          <p =
          class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>Just a thought…..<o:p></o:p></span>
          <p =
          class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>I’d be interested in how the servo speed function operates once =
          you’ve had a chance to work with it, if you wouldn’t =
          mind?<o:p></o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>Thanks<o:p></o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'>Bill L.<o:p></o:p></span>
          <p class=3DMsoNormal><span =
          style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
          D'><o:p>&nbsp;</o:p></span>
          <div =
          style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
          0in 0in'><p class=3DMsoNormal><span =
          style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span>=
          <span style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'> =
          OV10 [via Motion RC Forum] =
          [mailto:ml-node+s1075610n4368h51@n5.nabble.com]
          Sent: =
          Tuesday, September 30, 2014 12:34 AM
          To: =
          Rocketeer
          Subject: Re: DX6i Landing Gear Timing - Can It Be =
          Done?<o:p></o:p></span>
          </div><p =
          class=3DMsoNormal><o:p>&nbsp;</o:p>
          <p class=3DMsoNormal =
          style=3D'margin-bottom:12.0pt'>Bill,

          You can't change retract =
          speed with the DX6i.
          Wanted to slow down the flaps/retracts on my A6 =
          but couldn't, so that was the excuse needed to upgrade to the DX8. Am =
          much more pleased with that units capabilities.
          Regards,
          CB =


          <o:p></o:p>
          <div class=3DMsoNormal align=3Dcenter =
          style=3D'text-align:center'><hr size=3D1 width=3D"100%" noshade =
          style=3D'color:#CCCCCC' align=3Dcenter></div><div><div><p =
          class=3DMsoNormal><span =
          style=3D'font-size:9.0pt;font-family:"Tahoma","sans-serif";color:#444444'=
          >If you reply to this email, your message will be added to the =
          discussion below:<o:p></o:p></span>
          </div><p =
          class=3DMsoNormal><span =
          style=3D'font-size:9.0pt;font-family:"Tahoma","sans-serif";color:#444444'=
          ><a =
          href=3D"http://motion-rc-forum.1075610.n5.nabble.com/DX6i-Landing-Gear-Ti=
          ming-Can-It-Be-Done-tp2398p4368.html">http://motion-rc-forum.1075610.n5.n=
          abble.com/DX6i-Landing-Gear-Timing-Can-It-Be-Done-tp2398p4368.html</a> =
          <o:p></o:p></span>
          </div><div style=3D'margin-top:4.8pt'><p =
          class=3DMsoNormal style=3D'line-height:18.0pt'><span =
          style=3D'font-size:8.5pt;font-family:"Tahoma","sans-serif";color:#666666'=
          >To unsubscribe from DX6i Landing Gear Timing - Can It Be Done?, <a =
          href=3D"http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet=
          .jtp?macro=3Dunsubscribe_by_code&amp;node=3D2398&a mp;code=3DbGV5cmVyd2FAY=
          2FibGVvbmUubmV0fDIzOTh8LTE3MTM2OTA4Njc=3D">click here</a>.
          <a =
          href=3D"http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet=
          .jtp?macro=3Dmacro_viewer&amp;id=3Dinstant_html%21 nabble%3Aemail.naml&amp=
          ;base=3Dnabble.naml.namespaces.BasicNamespace-nabble.view.web.template.Na=
          bbleNamespace-nabble.view.web.template.NodeNamespace&amp;breadcr umbs=3Dno=
          tify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.na=
          ml-send_instant_email%21nabble%3Aemail.naml"><span =
          style=3D'font-size:7.0pt;font-family:"Times New =
          Roman","serif"'>NAML</span></a> =
          <o:p></o:p></span>
          </div></div></body></html>
          ------

          Comment

          • #6
            RE: DX6i Landing Gear Timing - Can It Be Done?

            Bill,
            Servo speed function works awesome. My flaps now come down at a slow rate on the A6. No more need to go and buy specific slow drive flap servos. Without running to fetch the manual, I believe the total delay can be upwards of 15 seconds. I set a five second time and that works for both the first and second flap positions. I set the flaps @ 15 degree 1st position and 30 degree 2nd position. That's a total of 10 seconds if I go from 0 to 30 degrees. Great control surface movement without radical/instantaneous changes to the planes attitude. Heck, sell that DX6i at your club for a $100(I did) and move up to the DX8. I snagged mine at a LHS for $250 new :)
            Regards,
            CB
            Warbird Charlie
            HSD Skyraider FlightLine OV-10 FMS 1400: P-40B, P-51, F4U, F6F, T-28, P-40E, Pitts, 1700 F4U & F7F, FOX glider Freewing A-6, T-33, P-51 Dynam ME-262, Waco TF Giant P-47; ESM F7F-3 LX PBJ-1 EFL CZ T-28, C-150, 1500 P-51 & FW-190

            Comment

            • #7
              RE: DX6i Landing Gear Timing - Can It Be Done?

              X-Mailer: Microsoft Office Outlook 12.0
              thread-index: Ac/dss/2zRaNjKUSQY69CXnnApkiQgAOh01A
              Content-Language: en-us
              X-SA-Exim-Connect-IP: 209.85.214.178
              X-SA-Exim-Mail-From: leyrerwa@cableone.net
              X-SA-Exim-Scanned: No (on joe.nabble.com); SAEximRunCond expanded to false

              This is a multi-part message in MIME format.

              ------=_NextPart_000_0071_01CFDDC3.C2279950
              Content-Type: text/plain;
              charset="us-ascii"

              Greetings CB,



              Man, that's too much good news!!!

              That's excellent that the timing can be adapted to multiple setting.

              I gotta have one!!



              Oh no!!! I was holding my Dx6i in my hand while I was typing this and I
              accidentally dropped it!!!!!!

              How's that sound??? Nah, my wife would never buy it...



              I'll have to start checking around.



              Thanks,



              Bill L.





              From: OV10 [via Motion RC Forum]
              [mailto:ml-node+s1075610n4413h46@n5.nabble.com]
              Sent: Wednesday, October 01, 2014 3:04 PM
              To: Rocketeer
              Subject: RE: DX6i Landing Gear Timing - Can It Be Done?



              Bill,
              Servo speed function works awesome. My flaps now come down at a slow rate on
              the A6. No more need to go and buy specific slow drive flap servos. Without
              running to fetch the manual, I believe the total delay can be upwards of 15
              seconds. I set a five second time and that works for both the first and
              second flap positions. I set the flaps @ 15 degree 1st position and 30
              degree 2nd position. That's a total of 10 seconds if I go from 0 to 30
              degrees. Great control surface movement without radical/instantaneous
              changes to the planes attitude. Heck, sell that DX6i at your club for a
              $100(I did) and move up to the DX8. I snagged mine at a LHS for $250 new :)
              Regards,
              CB

              _____

              If you reply to this email, your message will be added to the discussion
              below:

              http://motion-rc-forum.1075610.n5.nabble.com/DX6i-Landing-Gear-Timing-Can-It
              -Be-Done-tp2398p4413.html

              To unsubscribe from DX6i Landing Gear Timing - Can It Be Done?, click here
              <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?macro
              =unsubscribe_by_code&node=2398&code=bGV5cmVyd2FAY2 FibGVvbmUubmV0fDIzOTh8LTE3
              MTM2OTA4Njc=> .

              <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?macro
              =macro_viewer&id=instant_html%21nabble%3Aemail.nam l&base=nabble.naml.namespa
              ces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.
              template.NodeNamespace&breadcrumbs=notify_subscrib ers%21nabble%3Aemail.naml-
              instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.nam
              l> NAML


              ------=_NextPart_000_0071_01CFDDC3.C2279950
              Content-Type: text/html;
              charset="us-ascii"

              <html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
              xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
              xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
              xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
              xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
              http-equiv=3DContent-Type content=3D"text/html; =
              charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 12 =
              (filtered medium)"><!--[if !mso]><style>v\:* =
              {behavior:url(#default#VML);}
              o\:* {behavior:url(#default#VML);}
              w\:* {behavior:url(#default#VML);}
              .shape {behavior:url(#default#VML);}
              </style><![endif]--><style><!--
              /* Font Definitions */
              @font-face
              {font-family:"Cambria Math";
              panose-1:2 4 5 3 5 4 6 3 2 4;}
              @font-face
              {font-family:Calibri;
              panose-1:2 15 5 2 2 2 4 3 2 4;}
              @font-face
              {font-family:Tahoma;
              panose-1:2 11 6 4 3 5 4 4 2 4;}
              /* Style Definitions */
              p.MsoNormal, li.MsoNormal, div.MsoNormal
              {margin:0in;
              margin-bottom:.0001pt;
              font-size:12.0pt;
              font-family:"Times New Roman","serif";}
              a:link, span.MsoHyperlink
              {mso-style-priority:99;
              color:blue;
              text-decoration:underline;}
              a:visited, span.MsoHyperlinkFollowed
              {mso-style-priority:99;
              color:purple;
              text-decoration:underline;}
              span.EmailStyle17
              {mso-style-type:personal-reply;
              font-family:"Calibri","sans-serif";
              color:#1F497D;}
              .MsoChpDefault
              {mso-style-type:export-only;}
              @page WordSection1
              {size:8.5in 11.0in;
              margin:1.0in 1.0in 1.0in 1.0in;}
              div.WordSection1
              {page:WordSection1;}
              --></style><!--[if gte mso 9]><xml>
              <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
              </xml><![endif]--><!--[if gte mso 9]><xml>
              <o:shapelayout v:ext=3D"edit">
              <o:idmap v:ext=3D"edit" data=3D"1" />
              </o:shapelayout></xml><![endif]--></head><body lang=3DEN-US link=3Dblue =
              vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>Greetings CB,<o:p></o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>Man, that’s too much good news!!!<o:p></o:p></span>
              <p =
              class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>That’s excellent that the timing can be adapted to multiple =
              setting.<o:p></o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>I gotta have one!!<o:p></o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>Oh no!!! I was holding my Dx6i in my hand while I was typing this and =
              I accidentally dropped it!!!!!!<o:p></o:p></span>
              <p =
              class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>How’s that sound??? Nah, my wife would never buy =
              it…..<o:p></o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>I’ll have to start checking around.<o:p></o:p></span>
              <p =
              class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>Thanks,<o:p></o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'>Bill L.<o:p></o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <p class=3DMsoNormal><span =
              style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
              D'><o:p>&nbsp;</o:p></span>
              <div =
              style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
              0in 0in'><p class=3DMsoNormal><span =
              style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span>=
              <span style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'> =
              OV10 [via Motion RC Forum] =
              [mailto:ml-node+s1075610n4413h46@n5.nabble.com]
              Sent: =
              Wednesday, October 01, 2014 3:04 PM
              To: =
              Rocketeer
              Subject: RE: DX6i Landing Gear Timing - Can It Be =
              Done?<o:p></o:p></span>
              </div><p =
              class=3DMsoNormal><o:p>&nbsp;</o:p>
              <p class=3DMsoNormal =
              style=3D'margin-bottom:12.0pt'>Bill,
              Servo speed function works =
              awesome. My flaps now come down at a slow rate on the A6. No more need =
              to go and buy specific slow drive flap servos. Without running to fetch =
              the manual, I believe &nbsp;the total delay can be upwards of 15 =
              seconds. I set a five second time and that works for both the first and =
              second flap positions. I set the flaps @ 15 degree 1st position and 30 =
              degree 2nd position. That's a total of 10 seconds if I go from 0 to 30 =
              degrees. Great control surface movement without radical/instantaneous =
              changes to the planes attitude. Heck, sell that DX6i at your club for a =
              $100(I did) and move up to the DX8. I snagged mine at a LHS for $250 new =
              :)
              Regards,
              CB <o:p></o:p>
              <div class=3DMsoNormal =
              align=3Dcenter style=3D'text-align:center'><hr size=3D1 width=3D"100%" =
              noshade style=3D'color:#CCCCCC' align=3Dcenter></div><div><div><p =
              class=3DMsoNormal><span =
              style=3D'font-size:9.0pt;font-family:"Tahoma","sans-serif";color:#444444'=
              >If you reply to this email, your message will be added to the =
              discussion below:<o:p></o:p></span>
              </div><p =
              class=3DMsoNormal><span =
              style=3D'font-size:9.0pt;font-family:"Tahoma","sans-serif";color:#444444'=
              ><a =
              href=3D"http://motion-rc-forum.1075610.n5.nabble.com/DX6i-Landing-Gear-Ti=
              ming-Can-It-Be-Done-tp2398p4413.html">http://motion-rc-forum.1075610.n5.n=
              abble.com/DX6i-Landing-Gear-Timing-Can-It-Be-Done-tp2398p4413.html</a> =
              <o:p></o:p></span>
              </div><div style=3D'margin-top:4.8pt'><p =
              class=3DMsoNormal style=3D'line-height:18.0pt'><span =
              style=3D'font-size:8.5pt;font-family:"Tahoma","sans-serif";color:#666666'=
              >To unsubscribe from DX6i Landing Gear Timing - Can It Be Done?, <a =
              href=3D"http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet=
              .jtp?macro=3Dunsubscribe_by_code&amp;node=3D2398&a mp;code=3DbGV5cmVyd2FAY=
              2FibGVvbmUubmV0fDIzOTh8LTE3MTM2OTA4Njc=3D">click here</a>.
              <a =
              href=3D"http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet=
              .jtp?macro=3Dmacro_viewer&amp;id=3Dinstant_html%21 nabble%3Aemail.naml&amp=
              ;base=3Dnabble.naml.namespaces.BasicNamespace-nabble.view.web.template.Na=
              bbleNamespace-nabble.view.web.template.NodeNamespace&amp;breadcr umbs=3Dno=
              tify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.na=
              ml-send_instant_email%21nabble%3Aemail.naml"><span =
              style=3D'font-size:7.0pt;font-family:"Times New =
              Roman","serif"'>NAML</span></a> =
              <o:p></o:p></span>
              </div></div></body></html>
              ------

              Comment

              • #8
                RE: DX6i Landing Gear Timing - Can It Be Done?

                Ok Bill, here's what you have to do... ( looking around and making sure she's not in the room!)

                First, you have to get her hooked on flying RC, no easy task I'll admit, but possible......
                Then, graciously, offer her your DX6i, all set up for her mind you, and then, well, you need one as well.
                "Look Honey, this is the one I think I should get....."
                voila
                Christmas Time in Rocketeer land!!

                Grossman56
                Team Gross!

                Comment

                • #9
                  RE: DX6i Landing Gear Timing - Can It Be Done?

                  X-Mailer: Microsoft Office Outlook 12.0
                  thread-index: Ac/gAMGdy6Nl2BmIRPe7hCbWgl8SuwAHUXfg
                  Content-Language: en-us
                  X-SA-Exim-Connect-IP: 209.85.214.179
                  X-SA-Exim-Mail-From: leyrerwa@cableone.net
                  X-SA-Exim-Scanned: No (on joe.nabble.com); SAEximRunCond expanded to false

                  This is a multi-part message in MIME format.

                  ------=_NextPart_000_017F_01CFDFF5.17F66900
                  Content-Type: text/plain;
                  charset="us-ascii"

                  Greetings G56,



                  You. Are My New Hero!!!!



                  She just yesterday mentioned that Christmas "is just around the corner".

                  "Operation, DX8" goes into effect...... 3.. 2.. 1.... NOW!



                  We should synchronize our calendars!!!

                  We'll back here December 26th to compare notes.

                  If the Christmas mission fails, there's always my birthday on the 29th as
                  a fall-back plan!



                  Clear Skies (and slow smooth landing gear)



                  Bill L.

                  In Okla.



                  From: Grossman56 [via Motion RC Forum]
                  [mailto:ml-node+s1075610n4541h14@n5.nabble.com]
                  Sent: Saturday, October 04, 2014 1:27 PM
                  To: Rocketeer
                  Subject: RE: DX6i Landing Gear Timing - Can It Be Done?



                  Ok Bill, here's what you have to do... ( looking around and making sure
                  she's not in the room!)

                  First, you have to get her hooked on flying RC, no easy task I'll admit, but
                  possible......
                  Then, graciously, offer her your DX6i, all set up for her mind you, and
                  then, well, you need one as well.
                  "Look Honey, this is the one I think I should get....."
                  voila
                  Christmas Time in Rocketeer land!!

                  Grossman56

                  _____

                  If you reply to this email, your message will be added to the discussion
                  below:

                  http://motion-rc-forum.1075610.n5.nabble.com/DX6i-Landing-Gear-Timing-Can-It
                  -Be-Done-tp2398p4541.html

                  To unsubscribe from DX6i Landing Gear Timing - Can It Be Done?, click here
                  <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?macro
                  =unsubscribe_by_code&node=2398&code=bGV5cmVyd2FAY2 FibGVvbmUubmV0fDIzOTh8LTE3
                  MTM2OTA4Njc=> .

                  <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?macro
                  =macro_viewer&id=instant_html%21nabble%3Aemail.nam l&base=nabble.naml.namespa
                  ces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.
                  template.NodeNamespace&breadcrumbs=notify_subscrib ers%21nabble%3Aemail.naml-
                  instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.nam
                  l> NAML


                  ------=_NextPart_000_017F_01CFDFF5.17F66900
                  Content-Type: text/html;
                  charset="us-ascii"

                  <html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
                  xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
                  xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
                  xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
                  xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta =
                  http-equiv=3DContent-Type content=3D"text/html; =
                  charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 12 =
                  (filtered medium)"><!--[if !mso]><style>v\:* =
                  {behavior:url(#default#VML);}
                  o\:* {behavior:url(#default#VML);}
                  w\:* {behavior:url(#default#VML);}
                  .shape {behavior:url(#default#VML);}
                  </style><![endif]--><style><!--
                  /* Font Definitions */
                  @font-face
                  {font-family:"Cambria Math";
                  panose-1:2 4 5 3 5 4 6 3 2 4;}
                  @font-face
                  {font-family:Calibri;
                  panose-1:2 15 5 2 2 2 4 3 2 4;}
                  @font-face
                  {font-family:Tahoma;
                  panose-1:2 11 6 4 3 5 4 4 2 4;}
                  /* Style Definitions */
                  p.MsoNormal, li.MsoNormal, div.MsoNormal
                  {margin:0in;
                  margin-bottom:.0001pt;
                  font-size:12.0pt;
                  font-family:"Times New Roman","serif";}
                  a:link, span.MsoHyperlink
                  {mso-style-priority:99;
                  color:blue;
                  text-decoration:underline;}
                  a:visited, span.MsoHyperlinkFollowed
                  {mso-style-priority:99;
                  color:purple;
                  text-decoration:underline;}
                  span.EmailStyle17
                  {mso-style-type:personal-reply;
                  font-family:"Calibri","sans-serif";
                  color:#1F497D;}
                  .MsoChpDefault
                  {mso-style-type:export-only;}
                  @page WordSection1
                  {size:8.5in 11.0in;
                  margin:1.0in 1.0in 1.0in 1.0in;}
                  div.WordSection1
                  {page:WordSection1;}
                  --></style><!--[if gte mso 9]><xml>
                  <o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
                  </xml><![endif]--><!--[if gte mso 9]><xml>
                  <o:shapelayout v:ext=3D"edit">
                  <o:idmap v:ext=3D"edit" data=3D"1" />
                  </o:shapelayout></xml><![endif]--></head><body lang=3DEN-US link=3Dblue =
                  vlink=3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>Greetings G56,<o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'><o:p>&nbsp;</o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>You… Are My New Hero!!!!<o:p></o:p></span>
                  <p =
                  class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'><o:p>&nbsp;</o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>She just yesterday mentioned that Christmas “is just around the =
                  corner”.<o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>“Operation, DX8” goes into =
                  effect………….. 3…… 2…… =
                  1…….. NOW!<o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'><o:p>&nbsp;</o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>We should synchronize our calendars!!!<o:p></o:p></span>
                  <p =
                  class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>We’ll back here December 26<sup>th</sup> to compare =
                  notes.<o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>If the Christmas mission fails, there’s &nbsp;always my =
                  birthday on the 29<sup>th &nbsp;</sup>as a fall-back =
                  plan!<o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'><o:p>&nbsp;</o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>Clear Skies (and slow smooth landing gear)<o:p></o:p></span>
                  <p =
                  class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'><o:p>&nbsp;</o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>Bill L.<o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'>In Okla. <o:p></o:p></span>
                  <p class=3DMsoNormal><span =
                  style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497=
                  D'><o:p>&nbsp;</o:p></span>
                  <div =
                  style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
                  0in 0in'><p class=3DMsoNormal><span =
                  style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span>=
                  <span style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif"'> =
                  Grossman56 [via Motion RC Forum] =
                  [mailto:ml-node+s1075610n4541h14@n5.nabble.com]
                  Sent: =
                  Saturday, October 04, 2014 1:27 PM
                  To: =
                  Rocketeer
                  Subject: RE: DX6i Landing Gear Timing - Can It Be =
                  Done?<o:p></o:p></span>
                  </div><p =
                  class=3DMsoNormal><o:p>&nbsp;</o:p>
                  <p class=3DMsoNormal =
                  style=3D'margin-bottom:12.0pt'>Ok Bill, here's what you have to do... ( =
                  looking around and making sure she's not in the room!)

                  First, =
                  you have to get her hooked on flying RC, no easy task I'll admit, but =
                  possible......
                  Then, graciously, offer her your DX6i, all set up for =
                  her mind you, and then, well, you need one as well.
                  &quot;Look =
                  Honey, this is the one I think I should get.....&quot;
                  voila =

                  Christmas Time in Rocketeer land!!

                  Grossman56 =
                  <o:p></o:p>
                  <div class=3DMsoNormal align=3Dcenter =
                  style=3D'text-align:center'><hr size=3D1 width=3D"100%" noshade =
                  style=3D'color:#CCCCCC' align=3Dcenter></div><div><div><p =
                  class=3DMsoNormal><span =
                  style=3D'font-size:9.0pt;font-family:"Tahoma","sans-serif";color:#444444'=
                  >If you reply to this email, your message will be added to the =
                  discussion below:<o:p></o:p></span>
                  </div><p =
                  class=3DMsoNormal><span =
                  style=3D'font-size:9.0pt;font-family:"Tahoma","sans-serif";color:#444444'=
                  ><a =
                  href=3D"http://motion-rc-forum.1075610.n5.nabble.com/DX6i-Landing-Gear-Ti=
                  ming-Can-It-Be-Done-tp2398p4541.html">http://motion-rc-forum.1075610.n5.n=
                  abble.com/DX6i-Landing-Gear-Timing-Can-It-Be-Done-tp2398p4541.html</a> =
                  <o:p></o:p></span>
                  </div><div style=3D'margin-top:4.8pt'><p =
                  class=3DMsoNormal style=3D'line-height:18.0pt'><span =
                  style=3D'font-size:8.5pt;font-family:"Tahoma","sans-serif";color:#666666'=
                  >To unsubscribe from DX6i Landing Gear Timing - Can It Be Done?, <a =
                  href=3D"http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet=
                  .jtp?macro=3Dunsubscribe_by_code&amp;node=3D2398&a mp;code=3DbGV5cmVyd2FAY=
                  2FibGVvbmUubmV0fDIzOTh8LTE3MTM2OTA4Njc=3D">click here</a>.
                  <a =
                  href=3D"http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet=
                  .jtp?macro=3Dmacro_viewer&amp;id=3Dinstant_html%21 nabble%3Aemail.naml&amp=
                  ;base=3Dnabble.naml.namespaces.BasicNamespace-nabble.view.web.template.Na=
                  bbleNamespace-nabble.view.web.template.NodeNamespace&amp;breadcr umbs=3Dno=
                  tify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.na=
                  ml-send_instant_email%21nabble%3Aemail.naml"><span =
                  style=3D'font-size:7.0pt;font-family:"Times New =
                  Roman","serif"'>NAML</span></a> =
                  <o:p></o:p></span>
                  </div></div></body></html>
                  ------

                  Comment

                  • #10
                    RE: DX6i Landing Gear Timing - Can It Be Done?

                    Hey Bill, everything I know I learned from Ralphie trying to get his Red Ryder BB Gun

                    Grossman56
                    Team Gross!

                    Comment

                    • #11
                      RE: DX6i Landing Gear Timing - Can It Be Done?

                      Greetings G56,

                      AHHH, a true mentor and master strategizer is Ralphie!!!!

                      You have chosen wisely.....


                      Bill L.
                      In Okla.

                      Comment

                      • #12
                        RE: DX6i Landing Gear Timing - Can It Be Done?

                        Greetings CB,

                        I was wondering, do you know if the new 2014 version of the DX6 with 250 model memory offers the servo speed timing function?

                        Still searching out a DX8 deal but thought I'd ask in the mean time.

                        Bill L.
                        in Okla.

                        Comment

                        Previous template Next
                        Working...
                        X