Sundowner f4 
-
AMA 1102566 -
Not happy with this at all. Helmet is so small it makes making masks impossible and I have to freehand everything. My opinion might change in the am but for now I think it looks like ****.Attached FilesAMA 1102566Comment
-
-
I used to paint 25mm metal miniatures (6 ft tall person represented by 25 mm {slightly under an inch} tall figure)
You can't do any masking on those, you have to freehand it all.
I plucked an eyelash hair and glued it to a toothpick for detail work.
Everything done under a magnifying glass.
Not the style stuff you are used to... but you can get the details to your normal standards shown on the other figures you've done.FF gliders and rubber power since 1966, CL 1970-1990, RC since 1975.
current planes from 1/2 oz to 22 lbsComment
-
Yeah I paint 28mm figures too. Straight lines are the hardest. It looks ok and the owner is happy so I will stick with it. I don’t mind doing helmet designs but I need masks.
I build terrain too.
AMA 1102566Comment
-
Open bench again. Send your goodies in before it gets warm!AMA 1102566Comment
-
-
Ben they look amazing!! Thanks!!! I’ll send you my cockpit 3D parts whenever they come in from MotionrcOriginally posted by AkumaZeto View Post
Comment
-
AMA 1102566Comment
-
AMA 1102566Comment
-
Amazing! The subtlety is perfection.My YouTube RC videos:
https://www.youtube.com/@toddbredaComment
-
Company that makes this kit needs to re design the ammo box with the correct C Knuckle for the pin attachment to the lower rail on the Spandu. I used a little styrene rod to make a brace.AMA 1102566Comment
-
-
Looks good Ben. Are those the ones from iflytalies? Standard or deluxe?Comment
-
The guns are deluxe and I think the ammo can is standard because well frankly its poo. Going to start some rustingAMA 1102566Comment
-
Final
AMA 1102566Comment
-
Shutting down pilot service. Its been dead for months. If you need something pm me.AMA 1102566Comment
-
If you are up for doing a couple JHH pilots for the F-4, I will gladly send them your way!!! Can't get bored, right?? I will PM you later and we can work out the details! Thanks! JerryComment
-
I am going to get a 1/10th scale bomber crew from Europe, (GB, maybe?) Would you want to paint those guys? 5 to a set. Maybe getting two sets since it is a big B-17G
Comment
-
Feel free to pm me. I have asked that the thread be closed for now. If anyone wants something done please pm me. This is not a permanent closure.AMA 1102566Comment
-
Hi guys. I just need to put here that if you are going to drop ship me stuff please send payment right away. I dont like holding on to peoples stuff and as all of you know my turn around time is often less than a week sometimes it goes out the same day it came in. I just dont want to be peoples storage as I have a ton of stuff myself here. So if I receive items and dont get payment within 30 days of getting stuff I gotta post it publicly that you have 7 days to either send return label or payment or I gotta pitch stuff in the trash.
I run a commision business and have a ton of peoples stuff at my house in a cue but if I dont have funds I cant work on your products.
thanks and have a great summer!
BenAMA 1102566Comment
Comment