Manuals Rant! :)

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • wrongroad2
    replied
    G'day gang,
    I do not know what the new FMS V4 Trojan manual is like but the V2 and V3 manuals were as useful as an ashtray on a motorcycle.
    Things must be rubbing off on my wife, Dolly. I caught her trying to work out a transformer toy for our boy Johnathan. When I suggested to rti, I got that 'look' that all husbands know and recognize as, DANGER!!!
    Regards and respect
    Daryl

    Leave a comment:


  • xviper
    replied
    Sorry, I can't comment much on Hitec TXs or their manuals.
    Additionally, if your 2 AIL servos are Y'd together and/or if your flap servos are Y'd together, then on the TX, it's still considered "1 AIL, 1 flap".

    Leave a comment:


  • E-Challenged
    replied
    I'm using a Hitec Aurora 9 and Optima receivers .You are correct about starting with wing-type menu selection i.e., two ailerons (two aileron servos) and two flaps( two flap servos).You must also select use of a 3 position switch in lieu of the flap lever on the left side of the transmitter. There are more settings and tweaking of flap servo linkage to obtain trim-able flap positions and slowed flap servo action. There are also settings/mixes for down-elevator offsets to compensate for nose-up tendencies with flaps on high wing models. Since many scale models have flap options, manuals should include a summary of flap setup actions to be accomplished with clear references to manual sections for details. I have been told by Spektrum users that their manuals are easier to follow for flap setups. The same level of detail effort as for sailplane "flaperon" setup should be made in manuals for scale model flap setup.

    Leave a comment:


  • xviper
    replied
    Originally posted by E-Challenged
    I'm still not sure how I set up 3-position, trim-able, slowed action,flaps on my Tritle Stinson Reliant
    What kind of transmitter do you use? Putting instructions down for what you want and need to do with flaps can be a dissertation all in itself. It can be a very long, drawn out affair to get flaps set up. Not sure if you are relating servo instructions with flap set up instructions but servos have only very minimal relationship with flaps set up.
    If you're using Spektrum (and that's assuming you have a Tx that is complex enough to do proper flaps set up), it involves activating the flaps menu by selecting flaps in the wing type menu. Then you open up the flaps menu where you can then dial in the various flap positions and choose the deployment time and which switch you want to use. Of course, this should be prefaced by making sure the flap servo arm is in the proper starting orientation. This might require physically relocating the arm on the servo and/or adjusting the flap servo travel. These steps are VERY basic steps that we all must learn from experience and trial and error. There can be many, many other sub-steps before it's all done. It's too complicated for any manual to delve into. A manual would have to be 3 times as thick if every contingency were to be covered.
    Another topic that could be another manual in itself is "mixing". These things must also be learned. The basics are covered but to someone new to mixing, those basic instructions don't mean much. As it stands, my DX8G2 manual is already thick enough. It deals with the basics. The rest is up to me.

    Leave a comment:


  • E-Challenged
    replied
    In addition to ARF model manuals from Asia and the Phillipines, I wish that Hitec and other major RC Systems suppliers would improve the level of detail in transmitter manuals and receiver and speed control and battery charger instruction sheets. Many try to be "concise" but wind up being vague with a lot of cross-referencing. Hitec manuals seem "biased" toward high performance sailplane and helicopter setups an mixes. I'm still not sure how I set up 3-position, trim-able, slowed action,flaps on my Tritle Stinson Reliant

    Leave a comment:


  • Grossman56
    replied
    Just waiting for the guys to formulate a list of priority for the next round of manuals, in the meantime, the info on the Spitfire which corrects the manual is very helpful. Things like this are great when I don't own said plane, so thanks for posting.

    Grossman56

    Leave a comment:


  • corsair
    replied
    Hi Daryl.

    That is nice to hear back from you. Thanks for doing so.
    Yeah, Allen Bond "won" the America's Cup!! He also came over here and did a "leveraged buy out" of the company that I worked for. Ultimately, our company went bankrupt. Anyway, life went on and I found a whole new path in life and I am O K!!
    Wow Daryl, your club field looks amazing!!!!! It looks like it is a wonderful place an very well organized. Thank you for sending that link along! Maybe I should move to Australia!!!!!
    And I share your thoughts about these computers. They are good and great and wonderful - sometimes......, in the right hands..............., and yet some people use them for terrible things. It is way too bad that if they have the "intelligence" to do evil with them, that they do not see the light....., to do good with them instead!!
    And I like how your little boy is taking to R C flying. That brings back wonderful memories. I also taught my son how to fly R C. I built him a Sig Kadet Mark II to learn with. It was so much fun to see him progress through the learning curve. Those are memories that have not faded.
    I too enjoy building the balsa and lite ply models, but I have all foamies now - except for my sons Kadet, which is still here. I may convert it to electric some day, but in the mean time, I am "replicating" it out of foam board. It is turning into an interesting project. I still have the original plans to "build" by and I am cutting out the whole "outline" out of foam. Not quite sure as to what electric motor and battery and ESC I will use yet, but I will figure that out closer to when the plane is done and I know what the weight and ground clearance will be.
    Oh, I live in Minnesota, which is a state in the northern part of the U. S. It gets very cold and snowy here in the winter time. A lot of people in R C build planes over the winter months and then bring them out once the snow is gone and the weather warms up some. In my younger days, I would fly in the winter and would put skis on the plane instead of wheels and take off an land in the snow. It was fun, but could be very cold on the fingers!!!!!
    Well Daryl, I am now heading off to the annual EAA Experimantal Aviation Association Convention here in the U.S. It is truly amazing as people come literally from all over the world. As a matter of fact, more than several years ago, a contingent of people from Australia came over on a 747. They had a very good time and enjoyed 'partying' also.....!!
    I will be gone for about a week and I will not have access to e-mail, but I do hope that we can and will stay in touch. You seem like a good guy and I enjoyed learning more about you, your son and also your flying field too.
    Thank you so very much Daryl, and be safe too my friend!!!!!
    Regards and respect too.
    Jim

    Leave a comment:


  • wrongroad
    replied
    G'day Jim,
    Allen Bond? HHMMMM, did he not 'steal' the Americas Cup?
    It was a good time here in Australia but the Cup went all the way over to the west coast and the city of Perth. I think it is fact that Perth is the most isolated capital city in the world. It is a long way from anywhere else.
    The one thing I like about computers and forums, we can share good times all around the world in a few seconds. But the dark side can use it just as effectively.
    I am also blessed to be a late in life first time father and my little boy, Johnathan is now nineteen months old and loves coming to the field with daddy. He watches my flights and even claps the good landings. How he knows that it is good landing is beyond me but I take it!
    He already knows which planes are the 'stang' and "tro" so he is well on his way to getting the controls in his hands.
    I am about to order the Tony Nijhuis 134" Lancaster [as soon as my tax refund comes in, yes, the tax man was kind to me this year!] so, I will be back into building models after a thirty year hiatus. I love flying the foamies but flying something that is put together by your own hands is kinda exciting and nerve wracking in the same moment in time.
    It is great to live where we enjoy year round flying in usually very good conditions. Out of the 104 official club days last year, I think we lost six days due to the weather but having a seven day a week field soon makes up for any lost days.
    If you want to have a look at our field
    Grafton Model Aircraft Club Radio Control NSW Australia MAAA

    Be safe my friend
    Regards and respect
    Daryl

    Leave a comment:


  • corsair
    replied
    And G'day to you Daryl!

    I liked your thoughts about tin whistles and fog horns. I believe that a sense of humor certainly helps all of us get through some of the troubling times that take place in the world today!!

    I see that you are in Australia. Have you ever heard of a man named Allen Bond?

    Anyway, please do take good care and regards and respect to to you also!!

    Jim

    Leave a comment:


  • wrongroad
    replied
    G'day Jim,
    If tin whistles are made out of tin, what do they make fog horns out of?

    I wonder how many of the younger guys will know that one?

    Our local radio station played the old song back to back for seven times...each version was slightly different.

    Regards and respect
    Daryl

    Leave a comment:


  • corsair
    replied
    Originally posted by wrongroad
    G'day gang,
    In the Dynam Cirrus SR22 manual......
    'Put bubble gum on the wing, James.'
    I think they meant to glue the wings [at least I did] but my name is not James. I searched my club for a 'James' so he could do the job for me, as per the instructions but the instructions did not name a brand of bubble gum.:Confused:
    Since I could find neither, I took a chance and glued them myself.:Whew:
    Half the fun is checking out the manuals.:)
    Regards and respect
    Daryl
    I really like the idea of putting bubble gum on the wings. And it works amazingly well!! :Cool: I actually hooked up two big juicy wads (one on each wing tip) of Bazooka Bubble Gum (BBG) to the pitot tube on my Corsair and then ran a separate air hose from the pitot tube over to the 8 oz tank of helium that I located within the fuselage. So now....., as I fly around....., the bubble gum inflates into two very nice size bubbles, as the air pressure from the pitot tube forces the helium out of the tank and into the bubble gum and then the plane ends up just "floating in for a landing" at the end of the flight. Flaps for landing are now not needed at all!!

    Note:Please be sure to remove your bubble gum after each flight and replace it with a new wad. Otherwise, the bugs and flies will have a field day with your "used" bubble gum as it sits out in the sun while it is still installed on your wing tips. Also, make sure to bring along a plastic sandwich bag to place that "old" bubble gum in to take home, so that you can place that gum on your bedpost overnight so it does not loose its flavor!!

    Thank you.

    Jim :corsair

    Leave a comment:


  • Fast Eddie
    replied
    Originally posted by Grossman56
    I did all the FlightLine R/C manuals with the exception of the new Spitfire of course. The Freewing P-51 and the F14 Tomcat, the Pandora just off the top of my head.

    Grossman56
    Well Done Grossman and MotionRC. I just went through the FL Tigercat Manuel. It looks great. :Cool:

    Leave a comment:


  • Grossman56
    replied
    I did all the FlightLine R/C manuals with the exception of the new Spitfire of course. The Freewing P-51 and the F14 Tomcat, the Pandora just off the top of my head.

    Grossman56

    Leave a comment:


  • dkalwishky
    replied
    Which ones are updated? I'll go download the ones for planes I own.

    Leave a comment:


  • Grossman56
    replied
    Good news guys, the manuals I rewrote are now posted, thanks to Alpha and Aros!
    There will be more in the future as well !!

    Grossman56

    Leave a comment:


  • 401 FOOT CEILING
    replied
    Have a Mandarin speaker here in-house and willing to do it for a consideration. Has anyone noticed the typos on the decals?

    Leave a comment:


  • wrongroad
    replied
    But nothing you can not handle, Doc?;)

    Regards and respect
    Daryl

    Leave a comment:


  • doctormike
    replied
    Only problem...It makes my planes a tiny bit tail heavy.:Confused:Doc

    Leave a comment:


  • xviper
    replied
    Originally posted by wrongroad

    And you can not quite get it there, Doc?:)
    Regards and respect
    Daryl
    He has one of those very special, limited edition "air balancers" - precise down to 0.5 mm of nothingness.

    Leave a comment:


  • wrongroad
    replied
    Originally posted by doctormike
    I like the manuals that say the CG is --mm in front of the leading edge. Doc
    And you can not quite get it there, Doc?:)
    Regards and respect
    Daryl

    Leave a comment:

Working...