What New FlightlineRC or FreeWing Model would you like to see come next!

[Hardway]

Beats the heck out of the factory red paint job!

[Woodcock]

Sorry, that is not a T-6B. That's the FMS Pilatus PC-21 painted in the Navy T-6 scheme. Totally different aircraft! ;)

Yea I figured that out too. Figured others would as well. Stunning paint job though. I love it's look. Makes me want to do one just like it.

Woody

[PhantomNut]

The T-6B already exists. FMS

Sorry, that is not a T-6B. That's the FMS Pilatus PC-21 painted in the Navy T-6 scheme. Totally different aircraft! ;)

[Aros]

Outside of the Blackbird/A-12 or Concorde, The Bone is the one I would most covet in my hangar. Twin 80mm sweep wing please!!!

[Hardway]

The T-6B already exists. FMS

Can you send us a link? I will buy one tomorrow!!! :Cool:

[Elbee]

In 1600mm or larger? I looked and did not find the T6-B. I will keep researching. Thanks. But still need "The Bone". Best, LB

[vdanger]

$00.02USD:

Prop:
Beechcraft Texan 2

EDF:

B1 Lancer

The T-6B already exists. FMS

[Hardway]

I agree. The Bone in the hangar would be sweet!!! ;)

[Hardway]

OH yes B1 please!!! I live very near Nellis AFB and when they are having their various exercises theere are often 4 or so B1Bs flying out of here...
Our local club http://www.propnuts.org/ is well represented by former and current Air Force members. A large portion of them fly military models from all generations. Lots of F16s, A10s, F4s, F14s, etc.
This would be a huge hit!!!

Welcome to Hobby Squawk!!! Lots of good people and fun times here!!! Thanks for joining!!! Jerry

[Valkpilot]

Of all the airplanes on the list I am quite surprised how much interest the B1 Lancer really has! If this model ever gets made it would be interesting to see what scale and EDF size Freewing decides would be the ideal fit for it.
It could be anything from 4x 64mm, twin 70mm to Twin 80mm. It would also have to be interesting to see just how big this model could be that the mold cost will allow for. Plus a benefit of it having swing wings will be that it can have a pretty big wing span without being a pain to transport.

Though I find it strange that I've only seen two post-WWII mass-produced in foam, that being the B-2 and XB-70. And while I'd prefer Freewing come up with an upgraded version of the NiceSky XB-70, a B-1 would be nice as well. I'd say a twin 70 mm to keep it simple. But first a OV-10 Bronco before these people become an angry mob. I hear WBC has been pricing pitchforks at the local True Value.

[TBeghtol]

OH yes B1 please!!! I live very near Nellis AFB and when they are having their various exercises theere are often 4 or so B1Bs flying out of here...
Our local club http://www.propnuts.org/ is well represented by former and current Air Force members. A large portion of them fly military models from all generations. Lots of F16s, A10s, F4s, F14s, etc.
This would be a huge hit!!!

[PhantomNut]

$00.02USD:

Prop:
Beechcraft Texan 2

EDF:

B1 Lancer

Like your choices LB! The Texan in the Navy scheme would be way cool!

[Evoman]

Of all the airplanes on the list I am quite surprised how much interest the B1 Lancer really has! If this model ever gets made it would be interesting to see what scale and EDF size Freewing decides would be the ideal fit for it.
It could be anything from 4x 64mm, twin 70mm to Twin 80mm. It would also have to be interesting to see just how big this model could be that the mold cost will allow for. Plus a benefit of it having swing wings will be that it can have a pretty big wing span without being a pain to transport.

[Woodcock]

Some people just don't get it, the reason we are on this forum is because we like freewing / flight line airplanes instead of multi thousand-dollar wooden airplanes that don't even begin to compare to freewing planes. I've been down that road and for bang for the buck you just can't beat Freewing and Motion RC.
sure hope they come out with a 1600 mm P 39 and or A 26 Invader.

I'm sure we have all been down a lot of roads CWS, and yes we are here because we like Motion and there products. Yes Motion planes are cool, and an exceptional value indeed. But the ultimate planes are not made out of Foam! Yes the ultimate planes are much more expensive, and much more of a loss if you crash them. This is obvious I think.

To be honest, I think Motion could sincerely use a few new product lines. It would be important to implement these carefully as to not sustain a loss. I think it would be good if you offered some ultra-high quality non foam models. Ya know that next level of product like, Pilot Jets, or something like the Super Scale Top Flight models. Not Top Flight, but something like these, I know others are out there, I've seen them, just don't know there name. This way if some of your good customers want something like this, they can come to you for it, and not someone else.

Best Regards
Woody

[Elbee]

$00.02USD:

Prop:
Beechcraft Texan 2

EDF:

B1 Lancer

[Hardway]

Hi fellows flyers! i'd like to have a 1.4m Beech T 34B Mentor and a T34C Turbo Mentor retracts flaps lights
hope my wish can be true some day!! cheers!

Welcome to Hobby Squawk! Have a great weekend!! :Cool:

[Cws]

Y'all gotta get on board my list. It's the correct list and only one that matters.... :Straight-Face:

Props

FlightLine RC

Jets

Freewing

Now that we have that settled, a super scale F-106 would rate a 10 with me as well as an OV-10.

;)

Some people just don't get it, the reason we are on this forum is because we like freewing / flight line airplanes instead of multi thousand-dollar wooden airplanes that don't even begin to compare to freewing planes. I've been down that road and for bang for the buck you just can't beat Freewing and Motion RC.
sure hope they come out with a 1600 mm P 39 and or A 26 Invader.

[PhantomNut]

Hi fellows flyers! i'd like to have a 1.4m Beech T 34B Mentor and a T34C Turbo Mentor retracts flaps lights
hope my wish can be true some day!! cheers!

1700mm T-34C with all the bells and whistles would be awesome!

[buffetbob]

A 1600 OV-10A BRONCO, with EVERYTHING
(no mayo)!!!!!LOL:Devil:
ov10ov10ov10

TOTALLY AGREE! Close second is an A-37 80 - 90mm fan! Check this out sent by a good friend. It's Air and Space Mag story on the A-37 in 'nam! https://www.airspacemag.com/military...tweet-8974282/

[RCjetdude]

Y'all gotta get on board my list. It's the correct list and only one that matters.... :Straight-Face:

Props

FlightLine RC

Jets

Freewing

Now that we have that settled, a super scale F-106 would rate a 10 with me as well as an OV-10.

;)