Callie Graphics

FMS Fox

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • t33jetman
    replied
    Slow boat from China :(

    Leave a comment:


  • t33jetman
    replied
    Originally posted by xviper
    Did you get directly from FMS? Have they shipped it yet? Horizon says these planes won't be available for N. American distribution till mid-Jan.
    The guy in the pic is not from the USA. Belgium

    Leave a comment:


  • xviper
    replied
    Did you get directly from FMS? Have they shipped it yet? Horizon says these planes won't be available for N. American distribution till mid-Jan.

    Leave a comment:


  • t33jetman
    replied
    Click image for larger version

Name:	image_32792.jpg
Views:	866
Size:	38.3 KB
ID:	167287 Here a new pic of the size. no this is not me holding it , still waiting on mine to arrive.

    Leave a comment:


  • xviper
    replied
    Originally posted by t33jetman

    I heard from FMS support last night about my order. Its slow because of all of the Christmas orders and shipping everyone is doing with EMS. Because of the slow boat from China, they gave me another $30.00 credit on my account. My order is sitting somewhere in USA. should be in my hands before Christmas.
    Nice, 30 bucks is better than a kick in the pants.

    Leave a comment:


  • StormyDog1962
    replied
    It fills all the boxes for me. Large so I can see it, sounds good and seems to handle just fine. May have to look into getting one of these.

    Leave a comment:


  • t33jetman
    replied
    Originally posted by xviper
    I was in contact with my local hobby shop that I buy FMS from (via Horizon). It's the best way for me to purchase FMS planes. The bottom line is that the price is like the shipping is free and the exchange rate is better than I can do when using a CC or PayPal and paying in USD. The hobby shop deals with brokerage and it's worked into the final price. Any shipping damage is not my concern. They don't even involve me if that happens. After looking at the predictions of what our dollar will do in the next 12 months (from bad to horrible), I decided I'd have them order one for me. It should be arriving in mid to late January, about the same time as the new Corsair from Motion.
    I heard from FMS support last night about my order. Its slow because of all of the Christmas orders and shipping everyone is doing with EMS. Because of the slow boat from China, they gave me another $30.00 credit on my account. My order is sitting somewhere in USA. should be in my hands before Christmas.

    Leave a comment:


  • xviper
    replied
    I was in contact with my local hobby shop that I buy FMS from (via Horizon). It's the best way for me to purchase FMS planes. The bottom line is that the price is like the shipping is free and the exchange rate is better than I can do when using a CC or PayPal and paying in USD. The hobby shop deals with brokerage and it's worked into the final price. Any shipping damage is not my concern. They don't even involve me if that happens. After looking at the predictions of what our dollar will do in the next 12 months (from bad to horrible), I decided I'd have them order one for me. It should be arriving in mid to late January, about the same time as the new Corsair from Motion.

    Leave a comment:


  • xviper
    replied
    Originally posted by t33jetman

    Wow! you must have been really flying slow. Good to know on the first flight to check her out.
    Yeah, I was trying to soar/glide. Big FAIL!

    Leave a comment:


  • t33jetman
    replied
    Originally posted by xviper
    The comparison may not be valid but on my previous smaller Fox, I had partial flaps to help it hang better power off. For me and that plane, it didn't work so well. With some flaps applied, the plane tended to stall very easily, drop a wing and begin a death spiral. If you're going to try it, do so way up high in case this Fox does the same thing. The little Fox needed about 100 feet to recover from the spiral. I would try some flap and UP ailerons (crow?) to slow it down more just before landing touch down.
    Wow! you must have been really flying slow. Good to know on the first flight to check her out.

    Leave a comment:


  • xviper
    replied
    Originally posted by t33jetman

    This is by far not to be compared to the likes of a Eflite Radian XL, which is way lighter and will just float forever. A nice copy of the real plane with the COOL FACTOR of having no screws .
    This feature may show up in future planes as a selling point.
    I view this as a sailplane and not a glider, but I'm cool with that. In the video he dosn't show having put in half flaps and trying to stay up , but I will on mine. They don't even use flaps for landing on this plane.
    The comparison may not be valid but on my previous smaller Fox, I had partial flaps to help it hang better power off. For me and that plane, it didn't work so well. With some flaps applied, the plane tended to stall very easily, drop a wing and begin a death spiral. If you're going to try it, do so way up high in case this Fox does the same thing. The little Fox needed about 100 feet to recover from the spiral. I would try some flap and UP ailerons (crow?) to slow it down more just before landing touch down.

    Leave a comment:


  • t33jetman
    replied
    Originally posted by xviper
    I look at this plane as a "giant" foamie airplane that can fly adequately on low power. I don't look at it so much as a "glider" and certainly not as a sailplane. With this line of thinking, I'll more than likely buy one.
    I love big foamies but the disadvantage of other large planes is their lack of ease to put together and take apart. Transport size is important. While most big planes require screws to hold wings on, this one snaps together so you don't lose little bits and pieces. Sure, screws have made assembly/disassembly easier compared to what it could be without them but assembly would be impossible if even one screw goes missing. Same goes for the tail. Most big planes, the tail stays on but this one, the tail easily snaps on and off. I've arrived at the field on occasion only to find one of the wing screws fell out in the car during the ride there and I've used up all the spares from the last time I lost one. Brought the big plane and all its batteries for nothing.
    This is by far not to be compared to the likes of a Eflite Radian XL, which is way lighter and will just float forever. A nice copy of the real plane with the COOL FACTOR of having no screws .
    This feature may show up in future planes as a selling point.
    I view this as a sailplane and not a glider, but I'm cool with that. In the video he dosn't show having put in half flaps and trying to stay up , but I will on mine.

    Leave a comment:


  • xviper
    replied
    I look at this plane as a "giant" foamie airplane that can fly adequately on low power. I don't look at it so much as a "glider" and certainly not as a sailplane. With this line of thinking, I'll more than likely buy one.
    I love big foamies but the disadvantage of other large planes is their lack of ease to put together and take apart. Transport size is important. While most big planes require screws to hold wings on, this one snaps together so you don't lose little bits and pieces. Sure, screws have made assembly/disassembly easier compared to what it could be without them but assembly would be impossible if even one screw goes missing. Same goes for the tail. Most big planes, the tail stays on but this one, the tail easily snaps on and off. I've arrived at the field on occasion only to find one of the wing screws fell out in the car during the ride there and I've used up all the spares from the last time I lost one. Brought the big plane and all its batteries for nothing.

    Leave a comment:


  • Alpha
    replied
    Thanks for posting that video, T33jetman! I've been wondering how the market will react to a model of this size, feature set, and price point. They're on the website so I guess I'll see soon enough. I love the sound it makes on those power off loops and passes!

    Leave a comment:


  • t33jetman
    replied
    Uncut 8 minute Flight- #FMS 3000mm (118") Fox Glider No edits, no music and more power off maneuvers to show you the real performance of the #Fox.

    Leave a comment:


  • xviper
    replied
    Originally posted by t33jetman

    Sorry, but that is not the Jetman.i copied these pics off FMS site. Its not ten days yet since my order went in. But it's on the way they say from Singapore.
    Ahh, yes, Singapore Post. Even by air, it's still the "slow boat" from China.

    Leave a comment:


  • t33jetman
    replied
    Originally posted by xviper
    You mean that handsome devil hiding behind the Fox isn't you? :) I would have thought that even the free shipping from FMS would be via postal service (rather than "ground"), which shouldn't take more than a week to 10 days. Mind you, it's Xmas time and the post office is flooded with parcels.
    Sorry, but that is not the Jetman.i copied these pics off FMS site. Its not ten days yet since my order went in. But it's on the way they say from Singapore.

    Leave a comment:


  • xviper
    replied
    Originally posted by t33jetman

    Mine ,is on the way also on a slow boat from China.
    You mean that handsome devil hiding behind the Fox isn't you? :) I would have thought that even the free shipping from FMS would be via postal service (rather than "ground"), which shouldn't take more than a week to 10 days. Mind you, it's Xmas time and the post office is flooded with parcels.

    Leave a comment:


  • t33jetman
    replied
    Originally posted by James.MotionRC
    Got one on the way to do a build video and flight review. Really excited to fly this monster. How do you like it t33?
    Mine ,is on the way also on a slow boat from China.

    Leave a comment:


  • James
    replied
    Got one on the way to do a build video and flight review. Really excited to fly this monster. How do you like it t33?

    Leave a comment:

Working...