3d Printed Part Sets - Freewing 90mm F-22 Raptor

[downwindleg]

Hey Steve, what do you think about styrene or other material for push rod exits for the rudders? Being that you are the creativity leader among us I thought I'd throw a challenge out there. If you look at the real plane, there is sort of a hood that covers the pushrod controlling the rudder. This is the most exposed surface on the airframe and an oportunity to "clean up" another control surface. What do you think?

[C17loadmaster]

That’s where I got my hubs and doors :Cool:

I swear I’ll get a printer soon haha. There are endless possibilities using one in this hobby

[downwindleg]

Yes I have. Guess it was a senior moment.:Loser: Anyway, when I'm finally done with all the other mods, I will probably contact you about making those doors and the "hubcaps". Thanks for getting back to me.:Cool:

[RCjetdude]

Brad, I did it with an arm I designed and mounted to the inside of the door. The only real mod to the door is to remove the horn on the outside of it and a little bit of a rib on the inside of the door. You have seen this before haven't you?

[downwindleg]

Hey did anyone ever come up with some outer gear doors the are controlled from the inside without modifying the existing ones? Just wondering....and hoping. BTW I have plenty of the lexan sheet material for the LUD screen as well as the reflective sheet for anyone wanting to do my mod for the lit HUD and forward pointing green light as seen on the main thread.

[Pogo]

Thanks for the kind words, Pogo. Look up posts 105 (rear fairing) and 185 (front fairings).
Frank

Guess I didn't look very hard, lol! Thanks Frank!
Tom

[Radar-Guy]

Thank you for your work, Radar! I have your F-22 wheel covers installed and will certainly do this ESC cover. Are your wing spar fairing files available?- haven't been able to find them.
Tom

Thanks for the kind words, Pogo. Look up posts 105 (rear fairing) and 185 (front fairings).
Frank

[Pogo]

Thank you for your work, Radar! I have your F-22 wheel covers installed and will certainly do this ESC cover. Are your wing spar fairing files available?- haven't been able to find them.
Tom

[Radar-Guy]

Here is an ESC cover (designed for the 6s 130A unit).

[RCjetdude]

Here is the main gear LED housing. I realize the FS does not have lights on the mains but made them for better visual on landings I have them on mine but currently disconnected.

[RCjetdude]

I was thinking more of operational bay doors for those up close flybys.

Wow! Even better!

[Rcfiddy1]

Now design some open bay doors for the bottom.. ;)

I was thinking more of operational bay doors for those up close flybys.

[RCjetdude]

Now design some open bay doors for the bottom.. ;)

[Rcfiddy1]

They turned out nice.

[RCjetdude]

Those turned out really good Brian.

[Rcfiddy1]

Printed and painted

[Rcfiddy1]

[Rcfiddy1]

I modified STL to be printed as one piece so no need for screws, no seam on doors and made magnet slots fit my magnets from loews. It fits on the Prusa MK3 build plate at a 41 degree angle.

[RCjetdude]

If you can't scavenge them from something, these are about the closest 3rd party that I can find

https://www.magnet4sale.com/n45-1x1-8x1-16-neodymium-rare-earth-block-magnet/

[Rcfiddy1]

Anyone have a link for the magnets used in the weapons bay?