3d Printed Part Sets - Freewing 90mm F-22 Raptor

[Sotm]

Where are the links then?

[Dirty Dee]

Why are there no links attached to supposed links in the first post for the 3D parts?

They are placeholders

[Sotm]

Why are there no links attached to supposed links in the first post for the 3D parts?

[Visva11]

Gear doors will probably be uploaded by early next week. The F-22 arrived Stateside two weeks ahead of schedule and we're a little... ...occupied... ... :)

Just to be clear, the main gear door files are unlit --we didn't plan to include a mount for an LED on the interior of these main gear doors, due to the clearance and geometry constraints. They're just plain doors with hinges that will require some DIY to install.

Unless there's enough of you who really wanted lit doors...

Great.
Thanks.
But what do you mean by "unlit" or "lit"?
You mean, lit means including a mounting for landing lights?

[TiredIronGRB]

Yeah, I am going to make an opening canopy... so what! LOL

Of course you are ;)

[Alpha]

Gear doors will probably be uploaded by early next week. The F-22 arrived Stateside two weeks ahead of schedule and we're a little... ...occupied... ... :)

Just to be clear, the main gear door files are unlit --we didn't plan to include a mount for an LED on the interior of these main gear doors, due to the clearance and geometry constraints. They're just plain doors with hinges that will require some DIY to install.

Unless there's enough of you who really wanted lit doors...

[Visva11]

I hope the 3dpup main gear door will soon be released.

[crxmanpat]

I have the frame printed as well. Not sure yet if I will tackle that project though.

[RCjetdude]

Yeah, I am going to make an opening canopy... so what! LOL

[Visva11]

Hi, any updates on the 3dpup main gear doors?

[Visva11]

I think this would be a good idea of thrust vectoring mod.....
Anyone thinks this would work?
Comments welcome.
Thanks in advance

[Hangarnc]

Can't believe it's been ten years since this movie...

This 1/12 scale figure is pretty close to the F-22's scale, and cost $4 at a local shop.

this needs to be printed out as a decal

[Elbee]

RCJD, Looks great. Love the detail. Best, LB

[RCjetdude]

The FDM printed, painted and detailed instrument panel for the F-22. Printed in ABS. Added the screen details from a couple images found online and sized in PowerPoint then printed on photo glossy paper. Glued them to the back with Foam Tac and added some casting resin to fill in the windows. All in all the detail of the print turned out pretty good.

[C17loadmaster]

I was an extra in the film driving a vehicle on the ramp when Tony Stark was walking out of the C-17. I had a great time and spent a few minutes with Robert Downey Jr during one of the breaks. Amazing how quick 10 years passes.

I watched the second Transformers movie while on a mission as a C-17 Loadmaster. The mission I was on I had time off and got to check out the Smithsonian in DC, the pyramids in Egypt, and Petra in Jordan. All places from the movie, while on a C-17

Sorry, I know it’s off topic but your post reminded me of it. Best job I ever had

[xplaneguy]

Can't believe it's been ten years since this movie...

I was an extra in the film driving a vehicle on the ramp when Tony Stark was walking out of the C-17. I had a great time and spent a few minutes with Robert Downey Jr during one of the breaks. Amazing how quick 10 years passes.

[Visva11]

Super happy and excited. Looking foward for the 3dpup main gear door. Thanks alpha.

[crxmanpat]

Iron Man was on again tonight, so I got to see the iconic scene Alpha replicated above again.

Got most of the cockpit parts printed up. Still need to work on print orientation on the seat. Just got my roll of ABS so will try that next.

[purduephigam]

So intrigued about the custom lighting and centerburner/reheatz. Just bought a centerburner for the build but if this is better, then I guess I'll just need to get another 90mm to put it on LOL

[Alpha]

Can't believe it's been ten years since this movie...

This 1/12 scale figure is pretty close to the F-22's scale, and cost $4 at a local shop.