A10 with no power
Why there is no power to the Admiral 6ch Gyro Stabilizer after both batteries are connected to the ESCs of the A10 EDF?
-
A10 with no power
Why there is no power to the Admiral 6ch Gyro Stabilizer after both batteries are connected to the ESCs of the A10 EDF?
-
Is everything plugged in that's supposed to be? What have you not plugged in? Is the BEC plugged in? -
Hi, yes everything is connected, the UBEC is also connected to the spare channel, the only thing that I made different it was that I connected a 4.8v battery to set up all the moving surfaces to the correct high/low rates.Comment
-
Can you put a meter on the UBEC and make sure it's putting out power? Should be 5.0VDC.Comment
-
I already done and nothing, there is no information on the meter!Comment
-
I think that is your answer. Did you plug the 4.8V battery and the BEC in at the same time?Comment
-
Yes I did.Comment
-
You may have burned out the BEC...Comment
-
Well, that is no good news! Anyway, thank you for all your help. I really appreciate it.
Thank you
Comment
Comment