You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

Avanti substitute

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Avanti substitute

    i have everything needed from a wrecked v1. cannot get spare part wings (out of stock). that being said, what airframe can i purchase using the avanti "stuff"

  • #2
    What kind of "stuff"? Not likely body stuff will fit on a V2.

    Have you tried here:

    Comment


    • #3
      Innards only. servoes/esc/fan/gear.. all the inside stuff. no body

      Comment


      • #4
        From your first post, it looked like you only needed wings because that's all you mentioned. Now it sounds like you need pretty much the whole plane except for those few things you listed.

        It'll be hard to find an "ARF". Most will be "ARF plus", which will have all the servos and retracts included. So, basically, all you've got that will be useful are the ESC, EDF. You can keep the servos and gear for spares for your next plane. Retract bodies are very similar from one plane to another (Freewing 80mm). Just remove the struts/tires. If you're only looking at Avanti S, then those bits will work in the V2. If you're not particular about an Avanti, then almost any Freewing 80mm ARF plus can use the ESC/EDF you salvaged from your old Avanti S.

        Comment

        Working...
        X