Official FMS 1400mm Votec 322 Thread
Collapse
X
-
I really like this plane except for 1 thing - How can the pilot land this plane when he can't see over the dash? Just wondering if anyone has tried removing the canopy to put in the right sized pilot? I can't believe FMS would put this plane out with an under sized pilot compared to the plane -
If anyone needs predator 30g servos, I have 5 for sale on classifieds. My Votec went bye bye, so I bought a gas 50cc lol/Leave a comment:
-
Same here , still holding up well ! A few shims and some glue have kept my LG tight after a few hard landingsLeave a comment:
-
Still enjoying flying the votec and have not had any issues except for the landing gear beginning to loosen in its mount more then likely due to rough field conditions. This bird is a blast to fly.1 PhotoLeave a comment:
-
-
Mine makes a noise similar to what you're explaining.
definitely seemed less noticeable with the APC 15x7 nylon prop I bought as a spare from Motion RC.Leave a comment:
-
Cowl is a good place to check for any rubbing, looseness, etc. It may be worth checking the undercarriage, also. If it isn't endangering the aircraft, I'd just keep flying it like you stole it. Fun runabout!Leave a comment:
-
I guess the best way to describe the noise is a very loud hum vibration noise whenever I go full throttle, i think it was the prop vibrating heavily which I'll get balanced out. I did tape the cowl down because the prop was rubbing against it in higher speeds and actually pulling it forward for some reason. Other than that, this bird flies like a balsa 3d plane, very smooth and non foam feeling. The vertical climb is jaw dropping. This plane is fast too, can almost keep up with much avanti s.Leave a comment:
-
Depending on the exact sound, the prop tips might be vibrating excessively during your dives. I would balance the prop if it really bugs you. Grinding in a motor, however, is a different animal that shouldn't only show itself in a dive. If there was a loose magnet or any other mechanical contact and significant enough to make an audible sounds, you'd know it before you took off. Inspect for loose screws or any FoD that might have been attracted to the magnets. Small chance, but worth checking.
I like this bird, especially its color, and its performance for the price.Leave a comment:
-
I put a scorpion backup battery on mine after a power outage on my 1st one. It flys awesome!!! Has anybody put a coat of poly On theirs? One other question have any all have the propeller or motor sound like it's grinding whenever you go full throttle out of a dive with it.Leave a comment:
-
I’m still enjoying mine and have zero regrets in buying one. It’s a blast to fly and so versatile as both a 3D flyer and a sport flyer. I’m running 4500mah batteries and not weighed it fully assembled.Leave a comment:
-
I haven't put this plane on a scale for the total weight .
30-gram digital servos with metal gears Looks like a FMS logo on them
I run both 3300mah and 5000mah batteries.
3300's for zipping around and my feeble attempt at 3D ! The 5000's offer a real solid feel for spirited Sport flying . I get 10 minutes with the 5000 and 4.5 with the 33001 PhotoLeave a comment:
-
-
It's been out a few months I'd say . Still really liking mine ... it's a real sweet flyer that's capable of a lotLeave a comment:
-
Lurking here.
There does not seem to be much information on this plane. How long has it been on sale?
I've been considering this or the Avios Extra 330LX.
This plane is more expensive however it seems to have less faults.Leave a comment:
-
Have you been able to determine what exactly caused it fail? I would definitely pursue getting it replaced under warranty. Sounds like a manufactured defect.I really love flying this plane and the look of the orange and black is spectacular. I am flying it 100% stock. Last week on a simple straight and level pass there was a large puff of smoke and my motor was no longer functioning. I was able to land safely, but the motor is toast. So if I buy a replacement stock motor and use the same stock prop, Am I going to be safe or should I do something else? I am asking for any advice on different motor prop combos for this plane.Leave a comment:


Leave a comment: