1/10th Scale Westcraft B-17G Electric Conversion

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Hardway
    replied
    Just for fun.... I had a hard time soldering the CC cap packs with only two (2) hands... LOL So I used the old servo tray from the B-17 (elevators and rudder) for a jig and it worked well!!! Couple of rubber bands from grocery store produce and bam!! There it is... I am taking orders for 25 cents each!!! Not really... MORE COFFEE please...

    Leave a comment:


  • Hardway
    replied
    27 Aug 0456. This is the DO or DO NOT week... There is no TRY...(Master Yoda says so) By the end of today I hope to have some real progress. I have run into several issues with the ESCs and their mounting locations with the capacitor packs attached... They are super smooth on start up and the data logger shows NO ripple effect at all!! :Cool: That is the good news. Making it all fit and cool correctly was the sticking point. So several re-engineering attempts later, here we are..... I think I have it beat today though!!! I am so ready to move on to the panel lines and rivets...

    22 Days until departure to Monaville, TX to www.bomberfieldusa.com

    Leave a comment:


  • Hardway
    replied
    Ha!!! You were really "working" for a paycheck... I was just spending money on a model!!! Very cool. Wish I could fly with you. We could do a trick!! :Silly:

    Leave a comment:


  • F22trainer
    replied
    Originally posted by Hardway
    Been working all day since 1030... :Cool: More pics when there is something cool to share!!!
    Been working all day since 0700,
    Last flight of the day, now it’s time for their written test!

    Leave a comment:


  • Hardway
    replied
    Been working all day since 1030... :Cool: More pics when there is something cool to share!!!

    Leave a comment:


  • rifleman_btx
    replied
    Sweeeeet!

    Leave a comment:


  • Hardway
    replied
    Soldering the cap packs... Had to modify the ESC mounts due to room and possible overheating... It is coming along though....

    Leave a comment:


  • Hardway
    replied
    U.S. ARMY – MODEL B-17G-35-BO
    AIR FORCES SERIAL NO. 42-32025
    CREW WEIGHT 1200 LBS.

    Service this airplane
    With 100 octane fuel
    only
    FUEL SYSTEM SUITABLE
    FOR AEROMATIC FUELS.

    Leave a comment:


  • Hardway
    replied
    OK..... The 24th of August and back to work since noon today. Had to shift the motor shafts on my two (2) remaining Power 60 motors and add the 8mm x 1.25 prop adapters. Working on the mock-up of the dual mount for the Phoenix 100 amp ESC's. Going to add some directional ducting under the cowl and into the nacelle for ram air cooling... Hoping to have some pictures of those up by this evening... Oh, I also measured my small trailer and I have 68 3/4" width to work with on the inside. The B-17 with the wing center section attached is 64 1/2 " !!! :Cool::Cool::Smug: So, moving her, almost ready to fly, is very doable!!

    Leave a comment:


  • Hardway
    replied
    Watching the calendar.... Anyway, I went with my wife and daughter to the aquarium today, and tomorrow the zoo and then...…. the eye doctor!! So when the 19th comes around (of September) I can see to fly!!!!!!!!!!!! Awesome... Hate to lose the building days, but great to spend with the family before school starts on Monday, 27th....

    Leave a comment:


  • Hardway
    replied
    Waiting till October! LOL

    Leave a comment:


  • rifleman_btx
    replied
    Heck yeah it is! I thought those might be going on his F16 Texas guard project he had going for a while. Either one would be great stuff. This plane will absolutely make deadline. I feel it, these motor mounts have got to be the most time consuming part of the build. Along with setting up and routing wires. It's looking great!

    Leave a comment:


  • EA-6B Geek
    replied
    Wow, look at all those HARM missiles. Is there an EA-18G going together behind the scenes?
    Fun project Hardway. It's great watching your progress

    Leave a comment:


  • Hardway
    replied
    At midnight, the top secret B-17G weapons come out to play..... And in the morning, I have four (4) of the CC Cap Packs to solder in so the wiring can get finished up to the motors... I also have to engineer a mount for two of the ESC's to fit in one inboard nacelle and have room and stay cool.... No problem!!! :Thinking: Detail number 103 on a list of 999.

    Leave a comment:


  • rifleman_btx
    replied
    Rock on brother

    Leave a comment:


  • Hardway
    replied
    Originally posted by JFandL
    :Cool:

    One month you say!!:Scared: Oh Boy
    Oh!! One month!! That is like way longer than I need!!!! (I said NEVER!!!) :Sick2::Scared::Silly:

    Leave a comment:


  • Hardway
    replied
    I received an email from Callie today... https://callie-graphics.com/ She is going to help me research and produce the graphics for Dreambaby. Some of the nose art is elusive, but I hope she may be able to find more that I have on the interweb!! Regardless, I know they will be excellent as usual!! Thanks Callie!!!!

    Leave a comment:


  • Hardway
    replied
    Time for a change of pace. Here are the exhaust turbo-superchargers made from DuBro wheels, button-head screws and styrene tubes and strips... The 1/48th scale model is from Revell/Monogram for reference... Not perfect by any means, and they need more detail added. But considering this model never had any to start with, it will be OK!! :Cool:

    Leave a comment:


  • JFandL
    replied
    :Cool:

    One month you say!!:Scared: Oh Boy

    Leave a comment:


  • rifleman_btx
    replied
    Ya'll will make it happen fellas :Cool:

    Leave a comment:

Working...