1/10th Scale Westcraft B-17G Electric Conversion

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Hardway
    replied
    LB, are you drinking coffee or having a good single malt this AM??? :Confused:;):)

    Leave a comment:


  • Hardway
    replied
    Hope you had a fantastic birthday Matt!!! I am up early. Have all my chores done. Have given the Good Lord a big Thank You!!! For everything... I am on cup of coffee number two and looking forward to a Bloody Mary before noon! :Drinks: Time to make some progress FROM those motor boxes.:Dizzy: Can't wait!!! :Cool:

    Leave a comment:


  • rifleman_btx
    replied
    Once those boxes are mounted and everything painted up, they will be top notch brother!

    Leave a comment:


  • Hardway
    replied
    After my beer and taco and hanging out with my little girl, I was worn out. I did some more work to finish the motor boxes and then went to bed... Here they are finished. Lots of other stuff to post, but I will do that tonight!! Hope everyone is having a great day!!! Happy Birthday BTX!!! :Party::Cake::Balloon::Drinks: That ugly firewall will be beautiful next time around!!! :pop

    Leave a comment:


  • rifleman_btx
    replied
    Sounds like a plan!

    Leave a comment:


  • Hardway
    replied
    Time for a beer and a taco and a dip in the pool!!!! Back in an hour.

    Leave a comment:


  • rifleman_btx
    replied
    Yeeeeeah!

    Leave a comment:


  • Hardway
    replied
    After a rest, all of these will be epoxied to the old round firewalls. Then on to servos, and beyond!!! WOOO....

    Leave a comment:


  • rifleman_btx
    replied
    No doubt, but it is one of the most important. Atleast it's almost knocked out

    Leave a comment:


  • Hardway
    replied
    Thanks BTX... I am just so tired of this phase, but it is getting to the end today!!! :Cool:

    Leave a comment:


  • Hardway
    replied
    Thank you LB. I appreciate you bro!! LOL Anyway, this worked great.... 20 minutes, instead of waiting two days for more screws to come in... Run the drill one direction and the Dremel the other and you have a mini lathe....

    Leave a comment:


  • rifleman_btx
    replied
    Man shes gonna be tip top brother!

    Leave a comment:


  • Elbee
    replied
    Originally posted by Hardway
    ...so I am having to modify 24 of them by grinding the washer off each one!!! That way they counter-sink and will fit flat against the old firewalls... No wonder my head hurts...
    Hardway, you are crazy in the best way possible. :wacky Driven, enthusiastic, and a bit A/R. LOL You're an RC modeler extraordinaire. Best, LB

    Leave a comment:


  • Hardway
    replied
    These are a few of the pieces for the motor mounting and boxes. The servo screws are for the boxes. 12 on each box, so 48 total.... Then there are the 6/32 x 3/4 inch SHCS, lock washers, and tiny #6 fender washers to mount the Power 60's. I don't have any regular #2 screws for the back of the boxes, so I am having to modify 24 of them by grinding the washer off each one!!! That way they counter-sink and will fit flat against the old firewalls... No wonder my head hurts.... LOL :Silly: So ready to move on from these today...

    Leave a comment:


  • Hardway
    replied
    So with this information direct from CC, I think the extensions will be just fine. They are under 18 inches (barely), and I have the CC Cap Pac to add to each ESC for the addition lengths... :Cool::Cool::Cool::) Back to work!!

    Leave a comment:


  • Hardway
    replied
    Just found this is the SPAM blocker... This is the reply from Castle Creations on the battery to ESC extension length....

    Jerry,

    Max length between the ESC and battery is 12”. Any more than that and you’ll want to add an external capacitor pack to the ESC wires to prevent damage to the onboard capacitors. Here is a link to the cap pack we make. http://www.castlecreations.com/en/cc...ck-011-0002-02

    Please let me know if you have any other questions. I’m happy to help, and have set up many multi-engine aircraft.

    Joe Ford | Product Specialist
    Phone | (913) 390-6939
    EMAIL | WEBSITE | LOCATION

    Leave a comment:


  • Hardway
    replied
    Originally posted by Elbee

    H, That is one of those tasks that pay the biggest dividends. Slow going I expect, though worth every minute in peace of mind. You are doing a superb job, sir. Best, LB
    If my motors go shooting off into the wild blue... it makes the B-17 harder to fly!!!! :Silly: Thank you bunches!!! Almost done, and then going to mount to the old firewalls....

    Leave a comment:


  • rifleman_btx
    replied
    I think itll be a good. And as Mike pointed out you always have the weighted hub option if need be. I feel like this will definitely hit the Mark's you need. One way or another options are nice to have. :Cool:

    Leave a comment:


  • Hardway
    replied
    Originally posted by MikeT

    You could always add Harry Higleys Hubs. That's what I did on both my Hanger 9 20CC P-47 and F4U. Both use the Power 60 set up. They make several different weights .

    http://www.harryhigley.com/index.php...&product_id=81

    Mike
    Thanks Mike!!! Always an option... I have plenty of batteries to move around for a good CG too!!! I hope it is not too heavy one way or the other. :Sweating:

    Leave a comment:


  • Elbee
    replied
    Originally posted by Hardway
    A few shots of the motor box progress today...
    H, That is one of those tasks that pay the biggest dividends. Slow going I expect, though worth every minute in peace of mind. You are doing a superb job, sir. Best, LB

    Leave a comment:

Working...