1/10th Scale Westcraft B-17G Electric Conversion
Collapse
X
-
This is what I have been doing!!!! LOL I had an infestation of fire ants in the kitchen yesterday. They are looking for water. It is sooooo dry. Anyway, had to clear all the counters and use ant spray and then treat the outside of the house too.... Really not in the plan!!! Ha!!! Anyway, they are gone now....Leave a comment:
-
That is what I normally do. I also like the idea of all the ESC's being programmed the same. That way if I have to do a change in the field with a spare, they are all the same.... ;) Thanks for the input!! Do the numbers look better now? I think they are much better than the 13 x 8 props.....Leave a comment:
-
Just easier to switch two and be done, then color code the ends to match the change. R.Leave a comment:
-
Now I am going to drill the 13 x 12 3 blade REVERSE pitch prop and install it. Then, do the same readings. Do you guys think there is any benefit to reversing the direction via the ESC programming or just switch the two motor leads??Leave a comment:
-
Ran a few bench tests this morning with the new props! Looks good so far!!! Eflite Power 60. 470KV. Master Airscrew 13 x 12 3 Blade. Admiral 5000 mAh 6S 50C. EC5 connectors. 10AWG motor extension 24" long. Starting battery voltage 25.17 V. Running at 1/2 throttle. 44.9 amps / 1175 watts. Running at Full throttle. 64.8 amps / 1501 watts. Also, I moved the watt meter from the battery end to the motor end of the extension, and the readings were almost identical... I guess that is a good thing!!! :Confused::). Heat is nominal. The wires are barely warm. The motor is the hottest, but the ambient air temperature here is 98F now. Ran for 1 minute at 1/2 throttle, then a short break, then another minute at the same setting. The battery had 80 percent remaining...
4 PhotosLeave a comment:
-
Ok party is over, what ya doing? :pop
Just making sure you hit that dead line you know. Love seeing her updated.
Leave a comment:
-
Maybe I'll join you!!:wacky:Drinks:Leave a comment:
-
Well still less than a weeks time, but two day shipping took almost a week and theres no holiday to hold it back with either.:Confused:Leave a comment:
-
Roger!!! Working on a martini now.... Oh wait.... LOL :Scared::Drinks: Just having fun!!! Blessings!!! Jerry BTW, FedEx finally brought my mini table saw. Glad I paid 28.00 for two day shipping and ordered before noon last Thursday...…..:Angry:
Leave a comment:
-
I can't even begin to feel his kind of pain 17 years!! Now Mr. Hardway get back to work sir!!!
:popLeave a comment:
-
The Bally Bomber makes its Oshkosh debut 17 years after Jack Bally started the project of a lifetime.Leave a comment:
-
I sorted my Tamiya paints yesterday evening to see what I have. I think all of the XF (flat) colors are covered!!!1 PhotoLeave a comment:
-
The deliveries have started. Received the order from Horizon Hobby. www.horizonhobby.com. Found wheels there, that are close to scale and almost the right size. The 1/4" aircraft ply was in the order for the motor mounts and ESC mounts. 36 inch receiver extension. 24 inch telemetry extension for a temp sensor. Amazon sent the B-17G pilot's manual. Waiting on UPS for the Master Airscrew props, and then FedEx for the mini table saw... :):Cool:Leave a comment:
-
Well, I read the tracking data incorrectly on the Master Airscrew props... They are coming tomorrow along with a bunch of other stuff!!! So, no new test data reports today.... :( But it is getting close to quitting time anyway!! :Drinks:Leave a comment:


Leave a comment: