1/10th Scale Westcraft B-17G Electric Conversion

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • fhhuber
    replied
    Going larger than scale prop diameter tends to create clearance issues. Scraping prop blades against the ground or having props interfere with each other.

    "Too small" of a prop on an electric motor is never a problem to the motor.

    The Power 60 can turn some pretty large props, but you don't have to.

    Leave a comment:


  • Twowingtj
    replied
    A 14" prop would be closer to scale (11' 7" full scale dia down to 1/10 would be 13.8"). The amp draw is pretty low for a Power 60. If you've got the clearance, even the MAS 15x7 might be a good choice. They come in tractor and pusher so counter rotating would be possible.

    Leave a comment:


  • JFandL
    replied
    Originally posted by Hardway
    Did a test stand motor run... Eflite Power 60. 8mm prop shaft adapter. Master Airscrew 13x8 (3) blade. 10 gauge wire all around. EC-5 connectors. Admiral 5000 mAh 6s. 44.97 amps, 1007 watts, with 9270 RPM full throttle... CC 100 ESC... What do you guys think??
    What's the C ratting on the 5000 6's?

    Leave a comment:


  • MikeT
    replied
    Following along. This should be a good one.
    Mike

    Leave a comment:


  • Ole-Timer
    replied
    From everything stated, your getting there but it seems like your under proping the motors. I would expect a bit higher amp draw at WoT. After test flying my CZ T-28 with the 500Kv Power 60 that comes stock, I switched to an MA 16x10 Beechwood two blade prop. I’m right around 13lbs on that airframe and it rips with lots of extra power. I use a 6s 8000mAh battery and come in at 80Amp at WoT.

    Do do you have any way to test how many pounds of force your developing on the 13x8’s...?

    Leave a comment:


  • rifleman_btx
    replied
    Very nice!

    Leave a comment:


  • Elbee
    replied
    Originally posted by Hardway
    Times FOUR!!! For 43lbs...
    Hrdwy, Impressive. Best, LB

    Leave a comment:


  • Hardway
    replied
    Times FOUR!!! For 43lbs....

    Leave a comment:


  • rifleman_btx
    replied
    It will be brother

    Leave a comment:


  • Hardway
    replied
    Did a test stand motor run... Eflite Power 60. 8mm prop shaft adapter. Master Airscrew 13x8 (3) blade. 10 gauge wire all around. EC-5 connectors. Admiral 5000 mAh 6s. 44.97 amps, 1007 watts, with 9270 RPM full throttle... CC 100 ESC... What do you guys think??

    Leave a comment:


  • Hardway
    replied
    :Cool: Thanks for the support!!! It will be all good!! (I hope!!) LOL

    Leave a comment:


  • JFandL
    replied
    Anyone who has built a Westcraft B-17 or a Stafford B-24 aircraft. All I can say is I appreciate your time and effort when I get a chance to see one fly!!!
    Amazing sight to see. Good luck on the electric conversion.

    John

    Leave a comment:


  • Hardway
    replied
    Thanks LB! And GK, those Saito engines have about a gallon each through them now, maybe a little less. They were new in the pic I posted. ;) Appreciate you guys!

    Leave a comment:


  • Elbee
    replied
    Originally posted by Hardway
    Well. my wonderful wife helped me move the giant B-17G fuselage into the house last night!!! She is just wonderful.
    Hardway, I knew you had a soft spot.:Heart:What a great rebuild.:Cool: Would love to have a 72" or so version. Amazing work. Best to you my unknown friend, LB

    Leave a comment:


  • rifleman_btx
    replied
    Its gonna be nice, I'm looking forward to seeing it

    Leave a comment:


  • Grantham Kid
    replied
    Amazing project that is for sure. Congratulations. Those original Saitos look like they have done little work. Always wanted one and could never afford one. LOL

    Leave a comment:


  • Hardway
    replied
    This is a big bird. The horizontal stab is approx. 52" ! The rest of the parts for the motor testing arrive tomorrow! :pop

    Leave a comment:


  • Hardway
    replied
    Well. my awesome wife helped me move the giant B-17G fuselage into the house last night!!! She is just wonderful. On the down side, I really hurt my back and hamstring playing with my daughter in the pool... So since I can't just run around and work, I have been doing research and measurements for the scale interiors, and then ordering all the details from Motion and other sources... Ordered 8 meters of 10 gauge wire, of each color, today... Lots to do!!! That is overkill, but I don't want to run out of the big wires... Pics to follow...

    Leave a comment:


  • Hardway
    replied
    Originally posted by fhhuber
    What props you planning to use with the Power 60s?
    The higher the pitch, the better... The 60 has a lot of power, and the bigger diameter props are great, but they have to clear the fuselage!

    Leave a comment:


  • rifleman_btx
    replied
    Very nice!

    Leave a comment:

Working...