Going larger than scale prop diameter tends to create clearance issues. Scraping prop blades against the ground or having props interfere with each other.
"Too small" of a prop on an electric motor is never a problem to the motor.
The Power 60 can turn some pretty large props, but you don't have to.
1/10th Scale Westcraft B-17G Electric Conversion
Collapse
X
-
A 14" prop would be closer to scale (11' 7" full scale dia down to 1/10 would be 13.8"). The amp draw is pretty low for a Power 60. If you've got the clearance, even the MAS 15x7 might be a good choice. They come in tractor and pusher so counter rotating would be possible.Leave a comment:
-
What's the C ratting on the 5000 6's?
Leave a comment:
-
From everything stated, your getting there but it seems like your under proping the motors. I would expect a bit higher amp draw at WoT. After test flying my CZ T-28 with the 500Kv Power 60 that comes stock, I switched to an MA 16x10 Beechwood two blade prop. I’m right around 13lbs on that airframe and it rips with lots of extra power. I use a 6s 8000mAh battery and come in at 80Amp at WoT.
Do do you have any way to test how many pounds of force your developing on the 13x8’s...?Leave a comment:
-
-
Did a test stand motor run... Eflite Power 60. 8mm prop shaft adapter. Master Airscrew 13x8 (3) blade. 10 gauge wire all around. EC-5 connectors. Admiral 5000 mAh 6s. 44.97 amps, 1007 watts, with 9270 RPM full throttle... CC 100 ESC... What do you guys think??Leave a comment:
-
:Cool: Thanks for the support!!! It will be all good!! (I hope!!) LOLLeave a comment:
-
Anyone who has built a Westcraft B-17 or a Stafford B-24 aircraft. All I can say is I appreciate your time and effort when I get a chance to see one fly!!!Amazing sight to see. Good luck on the electric conversion.
JohnLeave a comment:
-
Thanks LB! And GK, those Saito engines have about a gallon each through them now, maybe a little less. They were new in the pic I posted. ;) Appreciate you guys!Leave a comment:
-
Hardway, I knew you had a soft spot.:Heart:What a great rebuild.:Cool: Would love to have a 72" or so version. Amazing work. Best to you my unknown friend, LBLeave a comment:
-
Amazing project that is for sure. Congratulations. Those original Saitos look like they have done little work. Always wanted one and could never afford one. LOLLeave a comment:
-
This is a big bird. The horizontal stab is approx. 52" ! The rest of the parts for the motor testing arrive tomorrow! :pop3 PhotosLeave a comment:
-
Well. my awesome wife helped me move the giant B-17G fuselage into the house last night!!! She is just wonderful. On the down side, I really hurt my back and hamstring playing with my daughter in the pool... So since I can't just run around and work, I have been doing research and measurements for the scale interiors, and then ordering all the details from Motion and other sources... Ordered 8 meters of 10 gauge wire, of each color, today... Lots to do!!! That is overkill, but I don't want to run out of the big wires... Pics to follow...Leave a comment:
-

.png)
Leave a comment: