Roban - World Class Scale Helicopters

Official Nexa 2020mm F8F Bearcat (Balsa ARF) Discussion Thread

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Thinset
    replied
    Still in the airframe but here you go
    Attached Files

    Leave a comment:


  • Robert Belluomini
    replied
    Can you post a photo of them

    Leave a comment:


  • Thinset
    replied
    I was referring to the stock retracts that come with the bearcat😀

    Leave a comment:


  • Robert Belluomini
    replied
    Originally posted by Thinset
    Anyone know if these retracts will handle 2s LiPo?
    Can you post a photo?

    Leave a comment:


  • Thinset
    replied
    Anyone know if these retracts will handle 2s LiPo?

    Leave a comment:


  • Thinset
    replied
    So mine showed up yesterday and I was impressed with the quality of this warbird. My only issue was the tip of the rudder was cracked at the seam. It appears that it was never glued in and the only thing holding it in place was the covering.
    Not a big deal though. Going to get into things in more depth tonite

    Leave a comment:


  • bbolz
    replied
    Me too thinset. Ordered mine yesterday too. Gonna stick a Saito R60 in it.

    Leave a comment:


  • radfordc
    replied
    Originally posted by Thinset
    If that’s the case than it Shouldn’t be a problem.
    The UMS at 162 mm in length is somewhat shorter than the SAITO at 168.5 mm.
    Yeah...that's the question. Since the cowl tapers from back to front you need the engine back a little way to fit. But, not so far that the prop isn't in the correct location. I'm sure you will make it work.

    Leave a comment:


  • Thinset
    replied
    If that’s the case than it Shouldn’t be a problem.
    The UMS at 162 mm in length is somewhat shorter than the SAITO at 168.5 mm.

    Leave a comment:


  • radfordc
    replied
    Originally posted by Thinset
    Pulled the trigger on this plane and should be arriving tomorrow. Plan is to drop in a UMS 5-75 radial with the hope of not add any extra ballast to the nose.
    If guys a installing a saito r60 this engine is only 10 mm larger in diameter so it should fit. I will know for sure when it arrives.
    plan on doing complete reinforcing wher needed and LED navigation lights to scale. And if all goes well in spring for maiden... may be a smoke system.
    Good luck. Whether it will fit depends on how far back you can get the engine. My R60 just fits.

    Leave a comment:


  • Thinset
    replied
    Pulled the trigger on this plane and should be arriving tomorrow. Plan is to drop in a UMS 5-75 radial with the hope of not add any extra ballast to the nose.
    If guys a installing a saito r60 this engine is only 10 mm larger in diameter so it should fit. I will know for sure when it arrives.
    plan on doing complete reinforcing wher needed and LED navigation lights to scale. And if all goes well in spring for maiden... may be a smoke system.

    Leave a comment:


  • Robert Belluomini
    replied
    Mine did not come installed.

    Leave a comment:


  • bbolz
    replied
    Does the bearcat come with the Navy decals on it?

    Leave a comment:


  • Thinset
    replied
    Can anyone tell me the diameter dimensions of the cowl.I have a line on a UMS 5 cup 75cc at a good price but not sure it will fit.

    Leave a comment:


  • Robert Belluomini
    replied
    Yes broke at the base if the fin. Three flights today flies great? I need to cover
    Attached Files

    Leave a comment:


  • bbolz
    replied
    Ill be darned. It does have a lot of fin, thats for sure. Looks to be a decent repair. Looks like the covering came off well. Cracked from regular flying?

    Leave a comment:


  • Robert Belluomini
    replied
    Had the vertical fin fracture
    Attached Files

    Leave a comment:


  • ScottyDsntKnow
    replied
    Originally posted by bbolz
    Yeah, already contacted VQ about the rare bear. They replied to contact Motion. Motion is not importing that plane unless there is more interest. VQ will not sell outsude of the distributor, Motion. So, thats why im looking at paint.
    The VQ Bearcat and Rare Bear are the same plane except the Rare Bear has the race bubble cockpit. You can still get the Rare Bears from VQ distributors besides Motion, you have to special order it. Lindinger sells it in the EU, it is special order and is like $659 Euros but thats with VAT included plus shipping. If they can drop ship it from VQ to the USA you probably won't pay VAT so it'll be similar to the price of the Nexa Bearcat.

    Just remember that the real Rare Bear has no flaps and clipped wings. There are a few ppl who have deleted the flaps and clipped the wings and it still flies fine. A Saito 60cc Radial DOES fit in the cowl but will not be nearly as fast as an electric or even just a 2 stroke single or boxer.

    As far as retracts, the ones for it on the Legend site for I think $100 work awesome. If they are still in stock...

    Leave a comment:


  • Twowingtj
    replied
    There were a lot of the E-flite Rare Bears sold. I would imagine that a larger balsa version, would do well too, if it was a well desinged strudy airframe. I'd like to have a nice 80" Rare Brear!

    I'd also like to see a series of Reno Air Racers done in the same scale. September Fury, Strega, and Voodoo to name a few.

    Leave a comment:


  • bbolz
    replied
    Yeah, already contacted VQ about the rare bear. They replied to contact Motion. Motion is not importing that plane unless there is more interest. VQ will not sell outsude of the distributor, Motion. So, thats why im looking at paint.

    Leave a comment:

Working...