Does anybody know Motion RC will import the Nexa Beechcraft Bonanza .46 size rc aircraft.
Nexa Beechcraft Bonanza V tail.
Collapse
X
-
Ooooh, that one peaks my interest. It was the very first plane I was allowed to fly at the tender age of 10. I couldn't reach the rudder pedals but the pilot took care of those. However, reading the instructions, I was surprised to see that the VQ model is a "bank and yank". I suppose it's easy enough to add another servo and make it a proper "ruddervator". -
Yes, that's the one ............................... http://www.vqmodel.com/NewVQModel_46...-46-ep-gp.html
Motion is the official distributor for VQ. Unfortunately, VQ has so many models in their line up that I doubt Motion will carry all of them. Perhaps, if asked (via customer service), they will bring in the one customers want - once they've established themselves in their new location and when Balsa supply and shipping resolve themselves.Comment
-
You could try one of these. Plug it into an empty RX port and then do a mix where when the gear switch is in the "down" position, the light comes on.
If you don't want to go this route, find a multifunction control box ($25.00) from a Freewing plane (eg. AL-37) where the landing light comes on when the gear is down. You can plug the retracts into the box and the light into the appropriate pins on the box and that's all you do. The only connection to your RX is the lead from the "gear" on the box to the retract port on the RX.Comment

.png)


Comment