SPECIAL NOTE PLEASE READ: This Yak-11 must ship via freight on a pallet. You must be home at the time of delivery to sign and help the driver move the plane into your garage. This product will not ship the same day due to the freight line pickup schedule. A $200 discount is available for customers willing to pickup this plane at the Motion RC warehouse.
The Yakovlev Yak-11 is a trainer aircraft used by the Soviet Air Force and other Soviet-influenced air forces from 1947 until 1962.
The Black Horse Yak 11 faithfully represents the classic Russian trainer as attention was paid to a true to original appearance and best possible flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 40-60cc displacement.
Factory Weathered Printing The printing on this model has a realistic weathering complete with rivet and panel line detail that elevates the model to a whole new level of scale appeal. |
Naca Airfoil Design For Improved Airflow The Yak 11 utilizes a Naca airfoil design which maximizes airflow above and below each wing for increased lift and performance. |
Electric Power The Yak 11 uses an electric power recommendation with ample room for your electronics but can accept a gas power setup as well. |
Large Wingspan The impressive 92.5" wingspan offers impressive presence both in the air and on the ground. |
- High level of prefabrication right out of the box
- Lightweight, strong, laser cut balsa and plywood construction
- Panel lines and details printed directly onto the pre-applied, high quality covering
- Electric retracts with oleo struts for quality and scale appeal
- Recessed hinges on all control surfaces
- Pre-drilled hinge mounting holes
- Heavy-duty pin hinges on all control surfaces
- Large easy access fuel tank/battery/servo access hatches with spring loaded latches
- Painted and detailed cockpit, pilot and interior included
- Fiberglass control horns with ball link connector
- Comprehensive control and fitting accessories included
- Four-piece, plug-in wings simplify transportation and assembly
- Fiberglass cowl
- Mounts for both electric and gas power options included
- Black Horse Yak 11 2350mm (92.5") Wingspan - ARF
- Electric retracts with oleo struts
- Instruction manual
- 8 Channel radio - select a minimum 8 channel radio from our Radio Collection
- 8 Channel receiver - select a minimum 8 channel receiver from our Receiver Collection
- 180Kv Brushless outrunner motor - we recommend the Admiral GP60 8925-180Kv Brushless Motor
- 120 Amp brushless ESC - we recommend ZTW Gecko 120A ESC OPTO High Voltage Brushless ESC
- 2x 2S 2000-3000mAh LiPo or LiFe receiver packs
- 8x high torque servos - we recommend 8 Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servos
- For 10S setup TWO 5 Cell 18.5V 5000 - 6000mAh LiPo Batteries with EC5 connector in series - we recommend Admiral Pro 6000mAh 5S 18.5V 50C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
- 2 to 1 EC5 series adapter - we recommend Admiral EC5 2 to 1 Series Adapter
- Electric propeller - we recommend between an APC 24x10E and 25x12 2-blade propeller
- 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
- Engine: 40-60cc gas
- Gas Propeller: N/A
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine). Product Specifications:
AGE LEVEL :14 and up
SKILL LEVEL :intermediate
BUILD TIME :6+ hours
Model Scale | N/A |
Wingspan | 2350mm / 92.5in |
Length | 2095mm / 82.5in |
Weight | 11500g / 25.0lbs |
CG (Center of Gravity) | Refer to manual |
Wing Area | 99.5 dm2 |
Wing Loading | 115.60 g/dm2 |
Power System | 180Kv Brushless Outrunner Motor or 40-60cc 2 or 4-stroke (required) |
Electronic Speed Control | HV 120A (required for electric) |
Propeller / EDF | Between 24x10 and 25x12 2-blade propeller for electric, check engine manufacturer's recommendations for gas (required) |
Servos |
|
Landing Gear | Electric retracts with oleo struts |
Required Battery | TWO 5 Cell 18.5V 5000-6000 mAh LiPo Batteries with EC5 connector in series (required for electric) |
Required Radio | 8+ Channel (required) |
Ailerons | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | Yes |
Lights | No |
Hinge Type | Nylon Heavy Duty pin hinges |
Material | Balsa and plywood |
Skill Level | Intermediate |
Build Time | 6+ Hours |
Recommended Environment | Outdoors |
Comment