HSD 1600mm A-1 Skyraider WIP

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Bearcat
    replied
    Originally posted by TSHobbies
    yes, one of the mains finally broke right where the pin goes through..I have yet to find new replacements...I hear the ones from the FMS 1400 P-40 will work,but I haven't ordered any yet. until then,mines grounded.
    Strut Length: 105mm Overall Length with Retract: 150mm Mounting Holes: 35mm top to bottom and 25mm side to side.

    Measure yours and tell me if it matches or comes close to it..

    Leave a comment:


  • boomer108
    replied
    Very nice TI!

    Leave a comment:


  • TiredIronGRB
    replied
    I picked up one of these at eWeek that was new but had been robbed of the ESC, right retract (retract only), prop and cowl...I have replaced everything except the right retract.

    Click image for larger version

Name:	20171012_231031244_iOS.jpg
Views:	1414
Size:	167.7 KB
ID:	100951

    Leave a comment:


  • Bearcat
    replied
    Originally posted by TSHobbies
    yes, one of the mains finally broke right where the pin goes through..I have yet to find new replacements...I hear the ones from the FMS 1400 P-40 will work,but I haven't ordered any yet. until then,mines grounded.
    Let me know as I am looking for a replacement as well

    Leave a comment:


  • TSHobbies
    replied
    yes, one of the mains finally broke right where the pin goes through..I have yet to find new replacements...I hear the ones from the FMS 1400 P-40 will work,but I haven't ordered any yet. until then,mines grounded.

    Leave a comment:


  • Bearcat
    replied
    Originally posted by TSHobbies
    got more time with this one today..got 3 flights in... the last one though,one of the mains wouldnt rotate. had to land it in a grass field ..no damage though,other than a couple rockets came off...the darn pin that makes the gear rotate came out. Mrs took these with her new Niko 3300 she got for mothers day
    Did you have more issues with the mains? Mine I have tried to replaced and found out they don't make replacements any more... really bummed out right now.

    Leave a comment:


  • TiredIronGRB
    replied
    The HSD A1 Skyraider has the best looking prop on the market, I wish others would go to the solid one piece as well.

    Leave a comment:


  • OV10
    replied
    Glad I could give ya some help and insight

    Leave a comment:


  • Sky Wolf
    replied
    Originally posted by OV10

    Not aware of any attempts to do so but maybe that is because of the lack of traceability/continuity of topics about this airframe on the various forums.
    What I'm referring to is the dialog of version 1 and version 2 whereas there was no such thing.
    What folks are calling the v1 was actually done by Starmax and what is called v2 was done by HSD which where different companies.
    My suspicion is that HSD acquired the Starmax molds and continued the 1600 A-1 legacy with some minor upgrades to hardware like the oleo's as well as a one piece prop.
    As I said earlier in this thread that I'm really amazed that after only a year and half run that HSD discontinued it.
    The only really persistent problem with this bird was that rotation pin failure and it was a really something the manufacturer could've very easily fixed.
    Ohh well, I'll just keep flying her until she reaches her expiration date and hoping that FlightLineRC revives this iconic Nam CAS platform with the easy fixes in place.(and better canopy proportions ;))
    Thanks OV! And you're correct...HSD did buy the plans and molds from Starmax. It is almost nearly the same plane, with a few changes as you noted. They "upgraded" the gear, and changed the power configurations.

    Luckily, I haven't ever crashed my camo version 1, but I'd really like to find a fix for the gear. I may just go ahead and purchase the gear and do whatever necessary mods there are to make it fit.

    If I do, will post the process and outcome.

    Thanks again for your feedback!

    Leave a comment:


  • OV10
    replied
    Originally posted by Sky Wolf

    Thanks OV! I'll give that a whirl. I have the V1 but just recently damaged the left original retract when it wouldn't deploy (of course!) and had to make a landing with it stuck part way down.
    You would figure that this well known problem with the first plane would've been fixed by the Version 2.
    Has anyone retro-fitted the new retracts into the V1 yet?
    Not aware of any attempts to do so but maybe that is because of the lack of traceability/continuity of topics about this airframe on the various forums.
    What I'm referring to is the dialog of version 1 and version 2 whereas there was no such thing.
    What folks are calling the v1 was actually done by Starmax and what is called v2 was done by HSD which where different companies.
    My suspicion is that HSD acquired the Starmax molds and continued the 1600 A-1 legacy with some minor upgrades to hardware like the oleo's as well as a one piece prop.
    As I said earlier in this thread that I'm really amazed that after only a year and half run that HSD discontinued it.
    The only really persistent problem with this bird was that rotation pin failure and it was a really something the manufacturer could've very easily fixed.
    Ohh well, I'll just keep flying her until she reaches her expiration date and hoping that FlightLineRC revives this iconic Nam CAS platform with the easy fixes in place.(and better canopy proportions ;))

    Leave a comment:


  • Sky Wolf
    replied
    Originally posted by OV10
    Thanks OV! I'll give that a whirl. I have the V1 but just recently damaged the left original retract when it wouldn't deploy (of course!) and had to make a landing with it stuck part way down.

    You would figure that this well known problem with the first plane would've been fixed by the Version 2.

    Has anyone retro-fitted the new retracts into the V1 yet?

    Leave a comment:


  • OV10
    replied
    Originally posted by Pheonix
    I have one of these. What was the fix for the retract pin?
    :Thinking: Same as post 42

    https://www.rcgroups.com/forums/show...&postcount=365

    Leave a comment:


  • Pheonix
    replied
    I have one of these. What was the fix for the retract pin?

    Leave a comment:


  • OV10
    replied
    Here ya go Sky Wolf

    Leave a comment:


  • Sky Wolf
    replied
    Originally posted by OV10
    Damn...........It has come to my attention from a reputable source that HSD has discontinued production of this bird after only a year and a half run, what a bummer because it actually is a pretty decent bird as aesthetics and performance goes. It had it's anomaly with the retract strut pin that I posted an easy mod fix for but other than that am totally confused as to the stop production. No parts avail anymore which shoots my mod idea for the new FMS 1500 P-47 right in the butt for using the Skyraider's 16" prop with the FMS 5060-360kV motor to achieve the proper scale proportions and performance from that new FMS release.
    Maybe another opportunity for FlightLine, get those molds on the cheap and make some minor upgrades to keep an iconic Nam prop beast in the air.
    Just curious OV10, what was the mod to the HSD A-1 retract you spoke of? Where would I find your post?

    Thanks

    Leave a comment:


  • TSHobbies
    replied
    I finally got around to finish the painting of my Skyraider Bob ...I'll have to make some lightning bolt decals later to finish it off.. but ,keep in mind, this sculpt is actually Col Olds, but since they looked so much alike, and my plane is Bobs, figured might as well.
    but heres both versions.. my wife painted Col Olds, which she did a much better job on him than I did.

    Leave a comment:


  • Alpha
    replied
    Originally posted by TSHobbies
    wow..they were $200 but guess since its discontinued is the reason for the price hike
    I ran to the website to buy it but I noticed the price increase, too.

    Leave a comment:


  • stitch
    replied
    now if flightline comes out with one i will get one if there not too bad on price i like bigger planes anyway.

    Leave a comment:


  • stitch
    replied
    oh i know there not ov but that one hsd i really like that one.the durafly one fly,s great so i know that 63 in. will be even better.

    Leave a comment:


  • stitch
    replied
    they have some parts for there,s but not many just to get retracks i had to buy a wing with the parts i needed inside.i needed the little part that holds the doors on,it snapped off in a crosswind slammed it into ground.bummer! really sucks had to get wing,thats when i stopped getting planes from them came here to stay.haha! teach them not to carry spare parts.hell i have 29 planes now anyone need one? hahaha 12 this year from motion. bout broke now.hope they don,t bring out a really nice one like the p38 or i will be getting another card.lol!

    Leave a comment:

Working...