HSD 1600mm A-1 Skyraider WIP

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Sky Wolf
    replied
    Just ordered a couple of the props. The appearance isn’t as scale from the previous release, but gotta have it.

    Leave a comment:


  • Jerry's Flying Circus
    replied
    Thanks OV10. It is as I suspected....

    Leave a comment:


  • OV10
    replied
    Originally posted by Jerry's Flying Circus
    Looking for some assistance/advice on the way forward.

    I think i wrecked the mysterious small black box (retract controller) that the retracts tie into by plugging the smaller battery into the main control board backwards.

    1. Is there any way to acquire an identical replacement small black box from HSD or anywhere else. You'll have to go on a Google safari
    2. Is there any other HSD retract controller that would be the same for a replacement Probability that the HSD F-16 controller may work
    3. Are the FMS P40 retracts a suitable replacement as they can be wired directly to the RX and eliminate the retract controller Yes per TI's post #103
    4. Why did HSD design the retracts with box and 2 wires? Because it is actually a more reliable retract than the majority of etracts that have the internal controller circuit card.

    Thanks for any answers provided!
    See above comments in red

    Leave a comment:


  • Jerry's Flying Circus
    replied
    Looking for some assistance/advice on the way forward.

    I think i wrecked the mysterious small black box (retract controller) that the retracts tie into by plugging the smaller battery into the main control board backwards.

    1. Is there any way to acquire an identical replacement small black box from HSD or anywhere else
    2. Is there any other HSD retract controller that would be the same for a replacement
    3. Are the FMS P40 retracts a suitable replacement as they can be wired directly to the RX and eliminate the retract controller
    4. Why did HSD design the retracts with box and 2 wires?

    Thanks for any answers provided!

    Leave a comment:


  • Sky Wolf
    replied
    Originally posted by Bearcat
    The Propellers are now available on HSD's website.. I ordered mine already.
    BearCat and TI, the HSD A-1 prop looks different from the previous versions on the site. Doesn't have the scale looking center. I hate that they've jacked up the price a little more and took the scale look away. I hope it's the same hard carbon-like plastic and not just regular soft plastic. Let us know what you think of it when you receive it.

    Thanks!

    Leave a comment:


  • TiredIronGRB
    replied
    Originally posted by Bearcat
    The Propellers are now available on HSD's website.. I ordered mine already.
    I picked up a couple more extras last week, these are the best looking props made IMO.

    Originally posted by Bearcat

    Oh no..so the HSD version of strut is different from mine, mine was a single rod that was held down by two grubs, this one appears to have a 5mm? shaft that the strut bolts too?

    correct me if I am wrong...
    I had to drill out the strut tube to fit the FMS retracts.

    Leave a comment:


  • Bearcat
    replied
    Originally posted by TiredIronGRB
    No, I used the stock struts and wheels.
    Oh no..so the HSD version of strut is different from mine, mine was a single rod that was held down by two grubs, this one appears to have a 5mm? shaft that the strut bolts too?

    correct me if I am wrong...

    Leave a comment:


  • Bearcat
    replied
    The Propellers are now available on HSD's website.. I ordered mine already.

    Leave a comment:


  • rifleman_btx
    replied
    Originally posted by Bearcat

    I just got done talking to HSD and I have news that is a mixed bag..
    * The owner of the molds is out of the RC business
    * Dragon Hobbies is now closed it's doors
    * the Propellers will be in stock in Jan 18'!!!!
    * retracts are no longer made for this bird (we knew this already)
    * www.hsdgo.com is the place to get the Props in 2018!

    So we know the mold's owner has retired from the business so that leaves the door open for another to buy it..if he is willing to sell it.
    Alpha! Get Flight Line on that mold! That would be too awesome!

    Leave a comment:


  • TiredIronGRB
    replied
    No, I used the stock struts and wheels.

    Leave a comment:


  • TSHobbies
    replied
    awesome! Thankyou TI .. I assume its also the struts from the P40 as well? can you take a photo of the whole assembly like that installed?

    Leave a comment:


  • Sky Wolf
    replied
    Originally posted by TiredIronGRB

    I can confirm the FMS 1400mm P-40 retracts work great on the Skyraider, I had to cut a small amount of foam out at the front and rear of the retract cavity in the wing and re-drill the holes in the retract housing, the cover hinge needed some trimming and new holes as well.

    Click image for larger version Name:	20171216_214740927_iOS 1.jpg Views:	1 Size:	87.5 KB ID:	109460
    That is most excellent news. She lives again! I was able to purchase one of th last remaining sets of HSD gear for the Skyraider, but hoping not to have to use th m for a while. Still on the originals, but not without pin hang-up issues.

    Thanks for for this great news TI!

    Leave a comment:


  • TiredIronGRB
    replied
    Originally posted by TSHobbies
    retracts has my bird grounded... guess Im just gonna have to bite the bullet and order some P-40 retracts and test fit myself.
    I can confirm the FMS 1400mm P-40 retracts work great on the Skyraider, I had to cut a small amount of foam out at the front and rear of the retract cavity in the wing and re-drill the holes in the retract housing, the cover hinge needed some trimming and new holes as well.

    Click image for larger version  Name:	20171216_214740927_iOS 1.jpg Views:	1 Size:	87.5 KB ID:	109460

    Leave a comment:


  • TSHobbies
    replied
    retracts has my bird grounded... guess Im just gonna have to bite the bullet and order some P-40 retracts and test fit myself.

    Leave a comment:


  • Bearcat
    replied
    Originally posted by OV10
    So this one is a lost cause now for replacement parts of anything :P
    Cmon Alpha.........you're warbird fanatics need a 1700 Flight Line Sandy. :Cool:
    I just got done talking to HSD and I have news that is a mixed bag..
    * The owner of the molds is out of the RC business
    * Dragon Hobbies is now closed it's doors
    * the Propellers will be in stock in Jan 18'!!!!
    * retracts are no longer made for this bird (we knew this already)
    * www.hsdgo.com is the place to get the Props in 2018!

    So we know the mold's owner has retired from the business so that leaves the door open for another to buy it..if he is willing to sell it.

    Leave a comment:


  • OV10
    replied
    So this one is a lost cause now for replacement parts of anything :P
    Cmon Alpha.........you're warbird fanatics need a 1700 Flight Line Sandy. :Cool:

    Leave a comment:


  • OV10
    replied
    Originally posted by F106DeltaDart
    There is always varioprop as well, but they aren't much cheaper..
    Arrrgghhh, ..... I know ;)

    Leave a comment:


  • F106DeltaDart
    replied
    Originally posted by OV10

    NOPE :(
    Only alternative would be the costly Biela :Scared:

    Addendum: BH now officially shows this bird in the military warbirds rc discontinued planes
    There is always varioprop as well, but they aren't much cheaper..

    Leave a comment:


  • OV10
    replied
    Originally posted by Bearcat
    Oh wow- noticed earlier today that the Propeller is no longer on Banana hobby's site and Dragon hobby USA site is down... YIKES is there any know replacement props for this bird?
    I have two different types
    1. single piece hub and blades as one unit
    2. Hub with 4 blades that are replaceable


    any ideas?
    NOPE :(
    Only alternative would be the costly Biela :Scared:

    Addendum: BH now officially shows this bird in the military warbirds rc discontinued planes

    Leave a comment:


  • Bearcat
    replied
    Oh wow- noticed earlier today that the Propeller is no longer on Banana hobby's site and Dragon hobby USA site is down... YIKES is there any know replacement props for this bird?
    I have two different types
    1. single piece hub and blades as one unit
    2. Hub with 4 blades that are replaceable


    any ideas?

    Leave a comment:

Working...