HSD 1600mm A-1 Skyraider WIP

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Woodcock
    replied
    Hey NoDirt, Nice!! Now let me se if I can find anyone that has one LOL. I'll check MRC first.

    Woody

    Leave a comment:


  • NoDirt!
    replied
    How about one of these:
    Don't know how it work scale wise but some guys have used them in their 74" B-17's so I would think it would be sturdy enough.

    Leave a comment:


  • Woodcock
    replied
    Welp, After opening my 1600mm A-1 Kit from HSD, I have discovered I need a retractable tail wheel. Was wondering if anyone had any suggestions? Tower has more than a few of these, but would really like to get the one HSD used if possible. If not I'll have to come up with some sort of solution for this. The kit did come with push rods, & clevises. Haven't looked for control horns yet though, very big box.

    Best Regards
    Woody

    Leave a comment:


  • Woodcock
    replied
    Thanks for the welcome. I was wondering about those FMS retracts, I'll take a closer look.

    Leave a comment:


  • TiredIronGRB
    replied
    If you drill out the stock strut 1/8" deeper you can leave the retract the full length and by re-drilling the retract mounting holes and cutting out a little foam in front of of the retract cavity you won't have to carve up the wheel wells.

    Leave a comment:


  • TiredIronGRB
    replied
    Originally posted by zorkahn

    What modifications are needed for the FMS 1400mm P-40 retracts?

    Mark
    Look back a few pages, I posted pictures and such.

    Leave a comment:


  • zorkahn
    replied
    Originally posted by TiredIronGRB


    Welcome to Hobby Squawk WC, the best retract for the A-1 is the FMS 1400mm P-40 retract.
    What modifications are needed for the FMS 1400mm P-40 retracts?

    Mark

    Leave a comment:


  • TiredIronGRB
    replied
    Originally posted by Woodcock
    Hi Guys, I'm new here. Now before I go on, "Woodcock" is my mothers maiden name. It's been my gaming name for almost 2 decades. lol. So no I'm not a pervert, it's a very respected old English name.

    OK, I just ordered a pair of E-flight 90 Degree rotating retracts to put in my brand new, "Dynam Cosair". One worked, one didn't, brand new out of the box, still on my build rack. Now, if any, "Dynam" reps are watching. "NO MORE DYNAM PLANES", for this pilot until this gets sorted! I highly recommend everyone does the same.

    I actually purchased the last A-1 kit HSD had on sale. This plane holds a very special place in my heart. I use to fly in one frequently. I wasn't the pilot. This is whole story in it's self so I'm not going to go there. It's sitting safely in the box in my garage. So if the E-flight retracts work out in my Corsair I will be putting them retracts in my A-1, as I have an, "E-flight P-47 Razerback", and, "E-flight Super Marine Spit Fire", and the retracts on both never failed me even in the slightest.

    If you want to see the, "A-1 Sky Raider" in action watch. "We Were Solders Once". This plane was in fact a beast, up close and personal. When you pick your scale pilot figure pay close attention, as this plane is a large plane. It quite literally took almost an act of god to shoot one down, (but some did get shot down in Vietnam).

    So yes, this is a personal treasure for me, it's going to get the best of everything.

    Welcome to Hobby Squawk WC, the best retract for the A-1 is the FMS 1400mm P-40 retract.

    Leave a comment:


  • Sky Wolf
    replied
    Welcome to the Squawk Woodcock! And thanks so much for the explanation of your handle. That gained a few respect points in my book! :Cool:

    Leave a comment:


  • Hardway
    replied
    Welcome sir!

    Leave a comment:


  • boomer108
    replied
    Welcome to the Squawk Woodcock. I have seen that movie numerous times and yes the A-1 was a beast.

    Leave a comment:


  • Woodcock
    replied
    Hi Guys, I'm new here. Now before I go on, "Woodcock" is my mothers maiden name. It's been my gaming name for almost 2 decades. lol. So no I'm not a pervert, it's a very respected old English name.

    OK, I just ordered a pair of E-flight 90 Degree rotating retracts to put in my brand new, "Dynam Cosair". One worked, one didn't, brand new out of the box, still on my build rack. Now, if any, "Dynam" reps are watching. "NO MORE DYNAM PLANES", for this pilot until this gets sorted! I highly recommend everyone does the same.

    I actually purchased the last A-1 kit HSD had on sale. This plane holds a very special place in my heart. I use to fly in one frequently. I wasn't the pilot. This is whole story in it's self so I'm not going to go there. It's sitting safely in the box in my garage. So if the E-flight retracts work out in my Corsair I will be putting them retracts in my A-1, as I have an, "E-flight P-47 Razerback", and, "E-flight Super Marine Spit Fire", and the retracts on both never failed me even in the slightest.

    If you want to see the, "A-1 Sky Raider" in action watch. "We Were Solders Once". This plane was in fact a beast, up close and personal. When you pick your scale pilot figure pay close attention, as this plane is a large plane. It quite literally took almost an act of god to shoot one down, (but some did get shot down in Vietnam).

    So yes, this is a personal treasure for me, it's going to get the best of everything.
    Last edited by Woodcock; Apr 22, 2018, 09:54 PM. Reason: Clarification in syntax

    Leave a comment:


  • EDFjetpilot
    replied
    I did clarify with HSDgo that it is the airframe only. No electronics (no servos, retracts, ESC, motor).

    Sean

    Leave a comment:


  • rifleman_btx
    replied
    Exactly, I'll wait til they drop it to 50.

    Leave a comment:


  • OV10
    replied
    Thanx TI for the info (got me baffled on where ya found it)
    My response to HSDgo is OK THEN..............NOT. No electronics , nada, zilch.........Nothing but a foam airframe for $260. LOL

    Leave a comment:


  • rifleman_btx
    replied
    So you get a box of foam...

    Leave a comment:


  • TiredIronGRB
    replied
    Originally posted by OV10

    Did you per chance ask what the kit consists of ?? When Dragon Hobby carried the kit it included all electrics except the motor and ESC.
    Requires:
    • 6 channel transmitter and receiver (not included)
    • Battery and charger (not included)
    • Brushless electric speed controller (not included)
    • Brushless motor (not included)
    • Nine servos (not included)
    • Retracts (not included)

    Leave a comment:


  • rifleman_btx
    replied
    Yeah the website has nothing about it at all

    Leave a comment:


  • OV10
    replied
    Originally posted by EDFjetpilot
    I chatted with HSDgo this afternoon and found out this plane is discontinued. They have a few kits in stock that the factory had in their warehouse. So when these kits are gone, they're gone.

    Sean
    Did you per chance ask what the kit consists of ?? When Dragon Hobby carried the kit it included all electrics except the motor and ESC.

    Leave a comment:


  • EDFjetpilot
    replied
    I chatted with HSDgo this afternoon and found out this plane is discontinued. They have a few kits in stock that the factory had in their warehouse. So when these kits are gone, they're gone.

    Sean

    Leave a comment:

Working...