Roban - World Class Scale Helicopters

Issue with an aero scout

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • Beau McCarver
    Member
    • Nov 2023
    • 1
    • Send PM

    #1

    Issue with an aero scout

    My aero scout was in freezing temperatures for a few days. The battery is working and takes a full charge. When I try to cycle it, the receiver starts beeping and the propeller moves a little bit with each beep. It won’t cycle through. Any ideas?
  • Waltwatson1@yahoo.com
    Member
    • Nov 2023
    • 2
    • Send PM

    #2
    Looking for a small but not to small pipercub type airplane

    Comment

    • Waltwatson1@yahoo.com
      Member
      • Nov 2023
      • 2
      • Send PM

      #3
      The Ilike top wing type planes

      Comment

      • quitcherbitchen
        How I learned to love the bomb

        • Jan 2016
        • 928
        • Altadena, CA
        • Send PM

        #4
        Originally posted by Beau McCarver
        My aero scout was in freezing temperatures for a few days. The battery is working and takes a full charge. When I try to cycle it, the receiver starts beeping and the propeller moves a little bit with each beep. It won’t cycle through. Any ideas?
        Hi Beau, I don't own an aeroscout, or any newer generation spectrum radio gear, but the condition you are describing sounds like the ESC will not arm. It might be in programming mode. Check the manual on programming mode to see what steps need to be taken to get out of it. Of course, always check that no wires are loose or off the receiver first. Take the prop off to be safe as well. Sometimes just moving the trim on the throttle up or down will solve the issue. Hopefully someone else with some spectrum expertise will chime in.
        Don't just fly--WREAK HAVOC!!!

        Comment

        • Joey L
          Member
          • Nov 2023
          • 3
          • Send PM

          #5
          Hi Beau… you might also check that your throttle stick is all the way down, and if it is, try a few clicks of down trim on the throttle….

          Comment

          Working...