Short flight before the storms roll through Chicagoland.
Official Dynam 1270mm F4U Corsair Thread
Collapse
X
-
I put so many takeoffs and landings on a V1 Dynam Corsair that it just wore out 😀. I just did the maiden a new V2 and she flys perfect. It will fly inverted (almost) hands free and takeoffs and landings are very scale. One of my favorite daily flyers along with the Dynam T28, P47 and Hellcat. I also have the Flightline TigerCat, P38, and Corsair. I luv the TigerCat but not so much the P38 and Corsair.Leave a comment:
-
Yes, My wife is very understanding but now in 4 years gone from 4 to 82 planes she now asks "do you need another plane" and I say yes but it's getting crowded in the house with all of them now. Need to sell some now for I think I might not fly some for there are so many.
Some I have flown once and the pucker factor was in effect.
Leave a comment:
-
-
Sorry for your loss. That's a classic wreckage. Broke her right in half! We have all experienced Dynam. They are a "gateway" into the Model Aircraft world. I have flown and crashed a few in the beginning and more pilot error than Dynam. Really, their 50 inch F4U is a bargain and now with partial flaps! Never been a fan of those foam injection points on the underside of their wings and the untaped wiring and other cheaper accents. Their lights and retracts are still a cheap mystery. The blue paint colour they use looks great, but it's hard to copy.Leave a comment:
-
-
-
Here's my old Dynam F4U from 2012. I installed a Bigfoot 25 -870kv motor in it with a Castle ESC. I used 3300 mAh 4 cell batteries and it flew great with those. I also tried a 3700. It was great to see it in the air and I think the paint colour still looks the best. I epoxied the wings and I don't fly it much now, but it can go anytime. As usual, I had trouble with the intermittent retracts, but eventually got the newest retrofits. Great price and if you work on it, it will be satisfying until you want to biggie size the Corsair. I still haven't bought the Flightline yet due to funding.Leave a comment:
-
I dont have mine now. Bu an awsome starter warbird. Wen u get good a 650 kv motor. 60 amp esc. Is a good upgrade. I had 4000 lipo. But mine was 1 inch from allway forward
Leave a comment:
-
I fly with a 4200mah pushed to the firewall, no nose overs and such.Leave a comment:
-
Battery size and position. For those flying with larger than 2200 35C, what is your setup ?
Thanks,
GaryLeave a comment:
-
godforbid but a makeup kit can b handy 4touchups keep in mind i am an auto painter but simplicity counts
Leave a comment:
-
Smudge123, Take a small part of the plane, (cockpit), to any hardware store and have them match the paint. If you are touching up small spots and scratches you will hardly notice the difference. However with a large area to paint you may want to consider repainting the aircraft.Leave a comment:
-
f4u ausie, thanks my friend, I will take your experience and meld it with the little that I have currently. Best of luck with the 1600.Leave a comment:
-
last buy not least.. when u get good at the dynam f4u,, do yourself a favour ,, if u can ... buy a flightline 1600 f4u ,, its a pleasur to fly even in wind .. land and taxi back ,,no worry about gear,,, as i said dynam great value,, but when u c the quality of the fline ,, u will b in luv cyaLeave a comment:
-
hi shotgun welcome.. b4 i got my fline 1600 f4u i spent the last couple years on 50 inch dynam f4u ... awsome value i was paying 220 australian dollers.. gear a prob on grass in th end i belly landed them.. each one i had i trimed the aileron and added flaps,, did not need them but looks cool and slows to a crawl.. the other thing u mighy consider is a 650 kv motor and 60 amp esc.. in this format vertical is easy . and with a 4000 4 cell 7 to 9 minut flights ,,, hav fun good luck, will post some pics
Leave a comment:
-
SHOTGUN40 Hello there, Shotgun, welcome to Hobby Squawk! I answered this question a few days ago, link below. It seems to come up often, so you're in good company! I hope you enjoy your Dynam F4U.Pilots, I'm new to the forum and also to RC as well. Hope the I may be of some help to someone in the near future. I do, however, need some assistance at this time. Can anyone tell me what the fractional scale # is for the Dynam 1270mm F4U? Thanks in advance for your response.
Leave a comment:


Leave a comment: