Grosporina i know mine has a lot of that slop too. No matter the position it’s in. I really noticed it when grading my roads but it is worse when it gets toward the back tilt with a load. It gets frustrating when you get a full bucket and it gets to that tipping point and you lose so much of it when it flips back. I’ve learned and work the machine accordingly, as it’s not perfect and as tight a tolerance it’s still pretty fun. I generally keep my loads smaller but since I do most of my playtime outside, losing dirt is not that big a deal anymore. But split peas all over the floor! That could be a problem.
Announcement
Collapse
No announcement yet.
DIscussion Thread: Huina C972M 1/14 Scale Wheel Loader - RTR
Collapse
X
-
Finally!!! Top Race sent me another new control board and it paired fine with the radio and I am back in business. Good news too, it looks like a newly redesigned board. Hopefully MRC will get parts and it will be a quicker process in making any future repairs. However I think they are over a year delayed even releasing the Huina products. Well when they do come they are worth the wait. You’ll see.
By the way this loader is all wheel drive and for it’s size and price point is really hard to beat.
Comment
-
Originally posted by Too Many Hobbies View PostYoutube has the answers for everything....lol.
I didn't even know it had 2 drive motors after running it....was surprised to see it had a dedicated motor for each direction. Makes me wonder if I can re-wire somehow to get both motors to work together in one direction. The truck would be a beast!
Comment
-
ERJ-DF congrats on the wheel loader. Loads of fun! As far as increasing height on arms I have not seen or found any mods to increase height. I also use a ramp or a dugout for the dump truck to drive into to max load it. You can do a mod for the bucket tilt arm to increase the bottom end tilt which also keeps it from tilting back and spilling on the loader. That’s the only bucket arm mod that I’ve seen.
- Likes 1
Comment
-
Originally posted by Baysim80 View PostERJ-DF congrats on the wheel loader. Loads of fun! As far as increasing height on arms I have not seen or found any mods to increase height. I also use a ramp or a dugout for the dump truck to drive into to max load it. You can do a mod for the bucket tilt arm to increase the bottom end tilt which also keeps it from tilting back and spilling on the loader. That’s the only bucket arm mod that I’ve seen.
Comment
-
ERJ-DF yes the excavator is the star. You can get a quick change attachment for the excavator that plugs into the accessory port on the small arm and you can get a bigger bucket and a scarifier and that really adds to the fun. But I have found that the wheel loader is the workhorse of all my equipment. MRC has a 3500mah that fits well into the battery tray that adds loads of time and increased performance throughout the battery life. Good price too. I get well over an hour run times.
- Likes 1
Comment
-
Originally posted by Baysim80 View PostERJ-DF yes the excavator is the star. You can get a quick change attachment for the excavator that plugs into the accessory port on the small arm and you can get a bigger bucket and a scarifier and that really adds to the fun. But I have found that the wheel loader is the workhorse of all my equipment. MRC has a 3500mah that fits well into the battery tray that adds loads of time and increased performance throughout the battery life. Good price too. I get well over an hour run times.
Comment
Comment