HL componet questions

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • HardRock
    Member

    • Feb 2021
    • 28
    • Send PM

    #1

    HL componet questions

    I have a couple of questions ...


    Click image for larger version

Name:	Smoke unit.png
Views:	380
Size:	98.4 KB
ID:	357552
    is the Heating coil on left (with red & black wires attached) and
    the smoke generator on right (with blue wires attached)



    Re-attaching wires to the main board...
    Does it matter which way the LED wires get connected? The plug allows it to connect in either direction


    (black)

    Click image for larger version

Name:	LED5 - black.png
Views:	373
Size:	117.3 KB
ID:	357553

    (silver)

    Click image for larger version

Name:	LED5 - silver.png
Views:	400
Size:	106.5 KB
ID:	357554





  • Rubicon99
    Senior Member

    • Dec 2019
    • 3311
    • Send PM

    #2
    Originally posted by HardRock
    I have a couple of questions ...


    Click image for larger version

Name:	Smoke unit.png
Views:	380
Size:	98.4 KB
ID:	357552
    is the Heating coil on left (with red & black wires attached) and
    the smoke generator on right (with blue wires attached)



    Re-attaching wires to the main board...
    Does it matter which way the LED wires get connected? The plug allows it to connect in either direction


    (black)

    Click image for larger version

Name:	LED5 - black.png
Views:	373
Size:	117.3 KB
ID:	357553

    (silver)

    Click image for larger version

Name:	LED5 - silver.png
Views:	400
Size:	106.5 KB
ID:	357554





    The left is the fan that pushes the smoke generated by the box on the right with blue wire.

    Yes it matters which way the LED wires are plugged in.




    Comment

    • HardRock
      Member

      • Feb 2021
      • 28
      • Send PM

      #3
      I labeled the wires but didn't pay attention to how they were seated.
      Are the plugs connected with the silver tabs facing the bottom of the MFU board or with the silver tabs facing the top of the MFU board? (nothing marking polarity on plug)

      Click image for larger version

Name:	LED5 - silver.png
Views:	350
Size:	106.5 KB
ID:	357622

      Comment

      • sclui56
        Member

        • Mar 2021
        • 415
        • LAX
        • Send PM

        #4
        For the LED's, RED=+ve, on the outboard pin. There should be an indication molded on the surface of the MFU "box", lower right corner.

        Comment

        Working...