[03.01.2024 18:30 UTC | fixed front_1.stl]
[02.01.2024 8:50 UTC | fixed triangular faces on arch_left and _right and same in /cut]
Fully functional radio controlled model of M1128 Stryker.
Can be turned into stand model
IMPORTANT!!!
Third party WPL units are required (check link below)
---
[READ BEFORE YOU BUY](https://docs.google.com/document/d/1uMPiyugUxU1ZRxS2Z1QiNdUT7gB10JHXBTLmc64rHtk)
---
[Manual, electronics](https://drive.google.com/drive/folders/1ZZDYueyLooMjHR3t7VjYSCDIOt9lIG1h) │[Live preview](https://rc3dtanks.site/detail.html#stryker) | [Video](https://youtu.be/ELlkwK6Ax7s) | [required WPL stuff ](https://docs.google.com/spreadsheets/d/18HAw-lQFoFKiFuvY6IrdHZCE9PPRJypYtO-pS_4cOi0/edit#gid=655909701)
---
Based on Heng Long TK-7.1. Does not support BB unit.
supported:
- turret rotation
- canon lifting
- smoke
- x2 40mm speakers
- fully functional suspension with WPL units
- recoil & elevation with SG90 servos
---
Some numbers:
scale: 1/16
width: 180mm
length: 420mm
height: 160mm
weight: 2,200 g
required printer area: 220x220
---
Please contact us on Discord in case of any troubles
[ 08.03.2024 14:00 UTC | addded missing adapters for gun elevation]
[30.12.2023 23:50 UTC | turret update ]
┣ crane hooks removed
┣ gunner's triplex removed
┣ same holes for m2 screws as on skirts, just to match
┗ added info in spec.xlsx regarding screws
[26.12.2023 9:20 UTC | fixed spec.xlsx, added info about screws and springs]
Fully functional radio controlled model of Maus.
---
[READ BEFORE YOU BUY](https://docs.google.com/document/d/1uMPiyugUxU1ZRxS2Z1QiNdUT7gB10JHXBTLmc64rHtk)
---
[Manual, electronics](https://drive.google.com/drive/folders/1ZZDYueyLooMjHR3t7VjYSCDIOt9lIG1h) │[Live preview](https://rc3dtanks.site/detail.html#maus) | [Video](https://youtu.be/KRRA4aPeJHw)
---
Based on Heng Long TK-7.1. Does not support BB unit.
supported:
- gearboxes are not HL like, it's 370 motors with warm gear
- turret rotation
- canon lifting
- smoke
- fully functional suspension
- recoil & elevation with SG90 servos (separete recoil for both barrels)
- casing for single visaton sc 5.9 speaker
---
Some numbers:
scale: 1/16
width: 240mm
length: 590mm
height: 230mm
weight: 3,900 g
required printer area: 220x220
---
Please contact us on Discord in case of any troubles